Irrigator Equipment Near Australasia
-
Manufactured by K-Line Irrigationbased in USA
The K-Line G-Set Pod Irrigation system consists of a low maintenance solar rechargable battery powered controller that operates low power latch coils that in turn operate a 40mm valve. Two controllers are available, a set it and forget it independent controller, and a mesh controller that can be radio updated from a distance. Both ...
-
Manufactured by K-Line Irrigationbased in USA
K-Line tapping saddles are available in 3 sizes:- 32mm (black), 40mm (green) and 45mm (black). The choice is determined by your choice of pipe. ...
-
Manufactured by K-Line Irrigationbased in USA
K-Line Irrigation's New 4 Pod 1.5 acre kit is designed for the homeowner with a large garden or backyard parcel to irrigate. The kit comes with 4 tan colored pods, 250 feet of 32mm (approximate 1 1/4") tubing, and all the parts and components required to hook up to an 1 1/4" water supply. The manual includes an inside page of all ...
-
Manufactured by K-Line Irrigationbased in USA
The tough one piece rotary molded K-Line pods which house the sprinklers are made of very strong impact and abrasion resistant UV-protected polyethylene that should last for years. The heavy duty skid plate on the bottom gives the pod a low center of gravity. The heavy duty construction is designed to withstand the rigors of being pulled across rough and uneven ground. The unique saddle quickly ...
-
Manufactured by K-Line Irrigationbased in USA
K-Line offers a choice of 5 NAAN durable sprinklers with application rates of 2.04 to 5.11 gpm and operating pressures of 35-55 psi. To connect to the tapping saddle choose the ...
-
Manufactured by K-Line Irrigationbased in USA
A choice of 5 Nelson nozzles allows for varied application rates of 1.64-5.47 gpm at 45-60 psi. The Nelson sprinkler is available with pressure compensating sprinklers which results in very good uniformity in hilly applications. This is a highly dependable rotary style sprinkler made from heavy duty plastics. The key fact about the Windfighter is that it can accomplish greater uniformity in ...
-
Manufactured by K-Line Irrigationbased in USA
The specially formulated polyethylene tubing is the key component to the system. This tubing is made of linear low density polyethylene resins that make it very strong yet flexible when used in the K-Line system. This tubing can withstand the effects of abrasive soils, kinking, freezing, the damage from UV light, and the various stresses exerted on the tubing while moving from set to set. ...
-
Manufactured by K-Line Irrigationbased in USA
A choice of 5 Nelson nozzles allows for varied application rates of 1.64-5.47 gpm at 45-60 psi. The Nelson sprinkler is available with pressure compensating sprinklers which results in very good uniformity in hilly applications. This is a highly dependable rotary style sprinkler made from heavy duty plastics. The key fact about the Windfighter is that it can accomplish greater uniformity in ...
-
Manufactured by K-Line Irrigationbased in USA
The R33 Rotator is an innovation that saves money, saves time, and performs better than the 3/4” brass impact sprinklers it’s designed to replace. The R33 uses Nelson’s proven Rotator® technology to provide longer throw distance, fight the wind and deliver uniform coverage. While brass sprinklers are prone to damage, clogging, and theft, the R33 is easy to clean, easy to ...
-
Manufactured by Hayes Sprayingbased in AUSTRALIA
The Hayes Spraying channel boom has been designed specifically for the irrigation industry. The main boom features a hydraulic fold that can be adjusted follow the contour of both channel drains and channel banks. The channel boom can be either hydraulic or manual folding and comes standard at 13m with 50cm nozzles spacings and manual ...
-
Distributed by Peel Valley Groupbased in AUSTRALIA
One of the most recognized and trusted drip tape brands in the world, T-Tape drip tape is used in a variety of crops around the world to help reduce water consumption, increase crop quality, and increased crop yields. T-Tape drip tape can be installed on the ground, under plastic, or even subsurface. Because of T-Tape's material strength, design, and quality production standards, it's the drip ...
-
Manufactured by Jadan Enterprisesbased in AUSTRALIA
The Jadan Big Bale Stacker is designed for those needing to get hay out of the paddock quickly and efficiently. Using just one man and one tractor, the Stacker operates quickly to collect and stack big square bales into stacks of 6 or 4 bales, for storage or transport. With a robust, simple design you can be assured that the Stacker will fill your requirements of a fast, uncomplicated hay ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Connects directly to your commercial irrigation controller, and sends programmed radio signals, specially encoded to activate the Aquaterr Receiver to which they are wirelessly ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Valve Actuating Receiver’s (VAR’s) are ideal for both agriculture and turf applications. Whether your system is manual or wired, if you are ready to implement an automated irrigation plan, Aquaterr’s Wireless System may be your best ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
The EC-300 portable soil probe combines Moisture, Temperature and Salinity measurements in one device, displaying instant measurements of each category, accurately and instantly. Allows the tracking of salinity of water entering and leaving the area, and determining the salt accumulation in the soil root ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Connects directly to your Commercial Irrigation Controller, and sends programmed radio signals, specially encoded to activate the Aquaterr Receiver to which they are wirelessly ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Metal Box mounted Aquaterr Valve Actuating Receivers are ideal for high traffic Municipal and Commercial applications. Whether your current system is manual or wired, if you are ready to implement an automated irrigation plan, Aquaterr’s Wireless System may be your best ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
The Aquaterr Remote Pump Control Kit moves water wirelessly, interfacing your existing reservoir sensor to your existing pump. Lowest cost to automate. No wires to dig and bury, and no consideration of terrain results in faster installation at a lower cost with excellent return on ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Box mounted Aquaterr Valve Actuating Receivers are ideal for high traffic turf applications, especially where vandalism needs to be discouraged and avoided. Whether your current system is manual or wired, if you are ready to implement an automated irrigation plan, Aquaterr’s Wireless System may be your best ...
-
Manufactured by Aquaterr Instruments & Automation, LLCbased in USA
Lowest Cost to Automate. The most cost effective, lowest cost-per-valve wireless receiver sets a new price-point for wireless valve automation. The VAR-8/AC is ideal for potted nurseries, greenhouses, or wherever power is available at the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you