Irrigator Equipment Near Cayman Islands
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
Manufactured by Franklin Electric Co., Inc.based in USA
Features: 100% Franklin factory wet tested with test results shipped with each pump. Premium ductile iron casting for longer life and higher pressures. Longer discharge and motor bracket bearings for increased pump life. Spiral cutlass rubber intermediate bearings designed for harsh environments. 416 Stainless Steel pump shaft ground and polished for maximum durability. Investment cast stainless ...
-
Manufactured by Plastic Pugliabased in ITALY
Brico PIPE is a black color low density polyethylene pipe, with indelible marking, manufactured with selected resins to guarantee long life and high reliability. This pipe is suitable for irrigation installations on small cultivated fields, gardens, hedges, balconies, terraces, etc. It can be used as main line or junction for ...
-
Manufactured by Plastic Pugliabased in ITALY
HortoKIT is a system especially designed for irrigation of small orchards, even when there is lack of pressure water sources. Its main feature is the making installations based on drip irrigation technology totally powered by water gravity. The Kit consists of a Brico Aquadrop coil equipped with a series of fittings and accessories that ...
-
Manufactured by Plastic Pugliabased in ITALY
AQUADROP is a thin black dripperline with a blue stripe, equipped with flat drippers, welded inside at pre-ordered, constant spacing. AQUADROP is the ideal solution for irrigation into open field or greenhouse of a variety of cultivation of horticultural plants and floriculture (like watermelons, melons, strawberries, zucchini, peppers, ...
-
Manufactured by Plastic Pugliabased in ITALY
GOLD-DRIP dripperline is a black pipe with a blue stripeon top, made up of turbulent flow self-cleaning dripper’ system, which can be used on flat ground or with strong slopes. GOLD-DRIP is particularly suitable for the installation of irrigation systems on multi-annual cultivations such as vineyards, olive groves, fruit trees, ...
-
Manufactured by Plastic Pugliabased in ITALY
Aquanet INOX are self-cleaning screen filters, suitable for the treatment of fluids containing suspended solids, also of colloidal nature. The special suction pads guarantee an efficient cleaning of the filtering element with reduced water consumption and without flow interruption. Depending on the installation requirements, it is possible to choose between two different constructive ...
-
Manufactured by Plastic Pugliabased in ITALY
Brico AQUADROP is a thin-walled black polyethylene hose with a blue stripe on top, with internally welded flat drippers manufactured by pre-ordered and constant spacing. Brico AQUADROP is suitable for drip irrigation on small and medium-sized installation, garden plants, hedges, balconies, terraces, etc. The inlet filters inside the ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Greenhouse ― Open Field ― Tree ...
-
Manufactured by Plastic Pugliabased in ITALY
Filter Body: Galvanized Steel or epoxy paint (upon request). Filter Element: Stainless steel Cartridge and 120/150 polyester screen - 120 mesh Lamellate Disk Cartridge. Discharge: BSP from ¾ "or 1". Working Pressures: 6 bar, hand closure -8 bar, bolted flange closure. Supplied Accessories:glycerine Bath STAINLESS steel Pressure Gauges (0 ÷ 10 bar) -Discharge Valve from ...
-
Manufactured by Plastic Pugliabased in ITALY
Single layer Lay flat PVC pipe with reinforced polyester mesh. AQUAFLAT PVC is a flexible, single-layer PVC pipe, reinforced by a high-strength polyester mesh, ideal for use as a manifold in drip irrigation systems, where is necessary to move installation in a frequent way. It Can also be used for irrigation with mini-sprinklers. AQUAFLAT ...
-
Manufactured by Plastic Pugliabased in ITALY
of the packaging and the ease of installation on the field, make this product versatile and practical one, especially for "DIY" irrigation installation. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you