Irrigator Equipment Near Europe
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Dependable ± 3% soil moisture accuracy - Built in temperature measurement - Robust and buriable, with 5 year warranty. The SM150T measures soil moisture and temperature with research-grade accuracy. It offers stable, robust and reliable performance at a great price. The SM150T’s advanced patented electronics and tough build produce a highly dependable sensor with exceptional salinity ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
years research and development at Delta-T Devices. Benefiting from a number of important design innovations, the WET150 delivers research-grade accuracy and build quality at a price point not previously thought possible. This means growers can now integrate a true research-grade multi-parameter sensor into their precision irrigation and ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The DL6 is a dedicated data logger optimised for use with Delta-T soil moisture sensors. It can be used with combinations of ThetaProbes, SM150 Soil Moisture Sensors, SM300 Soil Moisture Sensors and Profile Probes, and also accepts rain gauge and soil temperature probe inputs. Up to 16000 readings can be stored in ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the ...
-
Manufactured by SDEC Francebased in FRANCE
Accepted as the way to measure the water potential in soils, the tensiometer has become an easy to use and very handy tool for field research (agronomy) and managing inputs in agriculture (water). The SR 1000 tensiometer is robust as well as cost effective. Measurements are taken with a BOURDON type manometer. This measuring principle, easy to use as well as very precise, will certainly bring you ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
Manufactured by SDEC Francebased in FRANCE
The SMS series tensiometric tubes are designed to be used with the electronic hand held meter, ref. SMS 2500S. SDEC France's tensiometer tubes are also compatible with all other tensimeters on the market (compatible outer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
Manufactured by SDEC Francebased in FRANCE
either the 7.5cm,12cm or 20cm (3in, 4.8in, or 8 in) probe rods to suit your measurement depth. The LCD interface provides two modes: volumetric water content and relative water content (irrigation management) mode.Hand-held design allows for easy transporation and storage. Units connected by 5ft. Cable. Measures in less than one ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
Manufactured by SDEC Francebased in FRANCE
of tensiometers) is particularly practical for all users of tensiometric technics in general. This appliance is easily transportable in its small bag and will allow the user to envisage all field experimentations outside of the laboratory. It is obvious to use such a system in agronomy or agriculture for managing water use : determination of ...
-
Manufactured by ecotube Germany GmbHbased in GERMANY
ecotube - The first permeable subterranean irrigation system (colloquial soaker tube) for industrial agriculture, with an even water distribution of ...
-
Manufactured by SoilSensebased in DENMARK
An irrigation support system is only as good as the measurements it depends on. Accurate, reliable sensors are a must. ...
-
Distributed by Unifer International GmbHbased in GERMANY
T-L is a major manufacturer of hydraulically powered pivot irrigation systems that undergo thousands of hours of product research and testing for quality and performance. T-L’s hydrostatic drive offers many features not available on electric pivots. Unlike the stop-and-go action of electric models, each tower on a T-L system ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you