Irrigator Equipment Near Hungary
-
PremiumManufactured by AMS, Inc.based in USA
The Brown Moisture Probe allows you to determine moisture depth quickly and easily. Agronomists and farmers use it to determine the depth of moisture following irrigation. This 43" Probe has an auger tip and depth markings at 1', 2', and 3' from the tip. The Probe is pushed into the soil using the attached 10" Rubber-Gripped Handle. It will ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine ...
-
Manufactured by Poliext Kft.based in HUNGARY
Irrigation pipes, produced from low-density polyethylene raw material (LDPE) are used in a wide range of applications, including sprinkler & drip irrigation and agricultural & landscape irrigation systems. Thanks to their high resistance to mechanical stress, they apply to all mechanical fittings, especially for a connector with ...
-
Manufactured by Poliext Kft.based in HUNGARY
Tape fittings with the ring are for fast and simple connection, ideal for use in irrigation systems for connecting drip tapes. Increased middle part guarantees easy handling and assembling, and a long grip ring helps to pull the tape easily on the fitting. A simple solution for every situation, provided by a wide product ...
-
Manufactured by Poliext Kft.based in HUNGARY
Safe and fast way of connecting drip irrigation setup using fix grip ring. Quick joint fittings ensure additional protection even on uneven ground. They are specifically used for low-pressure connections. The maximum working pressure is 6 bar. A wide range of quick joints is available. From now on, besides 16 mm, a diameter of 20 mm is ...
-
Manufactured by Poliext Kft.based in HUNGARY
Produced from a softer material. High impact resistance and weathering, make them ideal for the most demanding application. Unlike steel, PE Pipes can easily bypass obstacles in their path and can withstand movements in the ground around them. The field of use is turf irrigation, open-field irrigation, ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The VariX Twinrotor is a unique rotary cultivator with two rotor shafts, each working at a different depth. The main rotor works the soil to a maximum depth of 25 cm and creates enough loose soil to form beds or ridges. First, a ridge former shapes the ridge and behind it the second rotor works overtop in the upper layer of the ridge with a variable working depth of 1 to 5 cm. A diabolo roll or ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
Self-propelled windrow turner for sewage sludge, organic and agricultural waste. Turning capacity of up to 3,000 m³ per hour dependent on material. Low fuel consumption. Comprehensive equipment as standard. Facilitates process improvement. Designed for ergonomic ...
-
Manufactured by Nitrogenmuvek Zrt.based in HUNGARY
in 500-1000 l/ha water). For small farmers 1 to 2 dl agent/10 l water/100 m2 . We recommend its use for irrigation with a fertiliser in a dilution of 0.05-0,1 V/V% (0.5-1 dl agent in 100 l water), repeated according to the plant’s needs, which facilitates the nutrient take up and the traffic and utilisation of other nutrients in the ...
-
Manufactured by Nitrogenmuvek Zrt.based in HUNGARY
water). For small farmers 1 to 2 dl agent/10 l water/100 m2 . We recommend its use for irrigation with a fertiliser in a dilution of 0.05-0,1 V/V% (0.5-1 dl agent in 100 l water), repeated according to the plant’s needs, which facilitates the nutrient take up and the traffic and utilisation of other nutrients in the ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Dependable ± 3% soil moisture accuracy - Built in temperature measurement - Robust and buriable, with 5 year warranty. The SM150T measures soil moisture and temperature with research-grade accuracy. It offers stable, robust and reliable performance at a great price. The SM150T’s advanced patented electronics and tough build produce a highly dependable sensor with exceptional salinity ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you