Only show results available in Virginia? Ok

leaf wetness Equipment

  • Premium

    RainWise - Model LW - Leaf Wetness Sensor

    The standard mounting is the RainWise plug-in mount that matches our Monopod. The sensor can also be furnished with a small NEMA 4X enclosure equipped with a Monopod mount for remote installations.

    By RainWise Inc. based in Trenton, MAINE (USA). from Sensors: Rain / Precipitation Sensors Product line

  • Leaf Wetness Sensor

    The Decagon Leaf Wetness Sensor (LWS) determines the presence and duration of canopy wetness, allowing you to forecast disease and protect the plant canopy. Because the Leaf Wetness Sensor measures the dielectric constant, droplets do not need to bridge electrical traces for the sensor to detect moisture. The presence of water or ice anywhere on ...

    By Rain Bird Corporation based in Azusa, CALIFORNIA (USA).

  • Leaf Wetness Sensor

    Detect wetness and ice formation with a sensor that closely mimics the wetness state of real leaves. No painting or user calibration required. Plug-and-read with the Em50 series of data loggers.

    By Decagon Devices, Inc. based in Pullman, WASHINGTON (USA). from Environmental Sensors Product line

  • Vantage Pro and Vantage Pro2 - Leaf Wetness Sensor

    Use to monitor the level of surface moisture on foliage, with range from 0 (completely dry) to 15 (saturated). Add up to 2 sensors to a single Wireless Leaf & Soil Moisture/Temperature Station. Includes 40' (12 m) cable.

    By Davis Instruments Corp. based in Hayward, CALIFORNIA (USA). from Weather - Sensors Product line

  • Leaf Wetness Sensor

    Parameters under measurement: leaf upper side wetness, leaf lower side wetness. Compatible with: MeteoSense/MeteoSense PRO Units, AgriSense/VineSense Units, AgriSense/VineSense wireless units. Item code, PS-0061-AD

    By Netsens s.r.l. based in Sesto Fiorentino Firenze, ITALY. from Sensors Product line

  • 3666 Leaf Wetness Sensor

    The 3666 Leaf Wetness Sensor is used to measure leaf wetness with its grid-like, resistance-based sensor, which is ranging from 0 ( dry ) – 15 ( wet ). This sensor is a circuit board with interlacing gold-plated fingers. Condensation on the sensor lowers the resistance between the fingers, which is measured by a datalogger including HL20 or HL10 ...

    By Jauntering International Corporation based in Wu Gu, TAIWAN.

  • 260-2591 Leaf Wetness Sensor

    260-2591 Leaf Wetness Sensor, 115 Vac, 25' cable. 260-2592 Leaf Wetness Sensor with heater control, 115 Vac, 25' cable.

    By NovaLynx Corporation based in Grass Valley, CALIFORNIA (USA). from Rain and Snow Sensors Product line

  • Model Type 112 - Vertical Leaf Filter

    Vertical Leaf Filter-Type 112 featuring a vertical chamber with vertical filter leaves, the Type 112 filter is available with options such as individual leaf outlets to permit continued operation in the event of localized media wear and tear. More economical than horizontal filters of similar capacity. Available methods of cleaning include ...

    By Industrial Filter & Pump Mfg. Co. based in Cicero, ILLINOIS (USA). from Chemical Acid Product line

  • 80V Pro - Model 500CFM - Cordless Leaf Blower

    80V Li-Ion System takes the lead in highest and most powerful gas-free cordless system. Up to 70 minutes of run time with fully charged 2AH Battery. DigiPro digital controlled brushless motor for more torque, quiet operation and longer life. Equivalent to 32cc gas engine. Quiet Operation at only 60 decibel and instant push button start. Up to 500 ...

    By Greenworks Tools based in Mooresville, NORTH CAROLINA (USA). from 80V Pro Product line

  • Model 4420 - Leaf and Debris Collector

    AgriMetal’s creative designers built a large diameter impeller and put it inside the pickup head. A leaf & debris collector designed to be towed behind lawn & garden tractors. The AgriMetal Collector is a stand-alone unit with an independent pickup head featuring a rotative flails. Leaves and debris are sucked into both sides of the ...

    By Agrimetal based in Wickham, QUEBEC (CANADA). from Sweeper Vac Product line

  • Davis - Wireless Leaf & Soil Moisture/Temperature Station

    Solar-powered station includes transmitter and battery inside weather-resistant shelter. Sensors are sold separately, letting you build the station that matches your needs. To view the data, add a wireless Vantage Pro2 console/receiver (#6312) or Weather Envoy (#6316), and a wireless Vantage Connect (#6620) or WeatherLink.

    By Davis Instruments Corp. based in Hayward, CALIFORNIA (USA). from Weather - Stations Product line

  • Model PTM-48A - Photosynthesis Monito

    The PTM-48A Monitor is truly state-of-the-art system for long-term automatic recording physiological characteristics of intact plants. The Monitor has four inputs for original automatic self-clamping leaf chambers. The chamber is normally open and shuts the leaf only for 30 seconds to take readings of both CO2 and H2O exchange rates. The short ...

    By Bio Instruments S.R.L. based in Chisinau, MOLDOVA. from Other Products Product line

  • Apiro - Herbicide for Consistent Control of Annual Grasses in Paddy Rice

    A herbicide for consistent control of annual grasses in paddy rice, with the flexibility to apply from pre-emergence up to the 3-leaf stage.

    By Syngenta based in Basel, SWITZERLAND. from Crop Protection - Herbicides Product line

  • Tyrant - Highly Refined Cotton Seed Oil

    TYRANT is a highly refined cotton seed oil designed to be used in place of standard crop oil. TYRANT provides rapid surface wetting and penetration of the leaf. TYRANT enhances the efficiency of pesticides and requires half the rate of standard crop oils.

    By AgXplore International based in Parma, MISSOURI (USA). from Adjuvants and Specialty Product line

  • SULPRO - Surface Herbicide Active Contains

    SULPRO is a herbicide additive for post-emergence treatment. Under difficult application conditions, such as low humidity, hot and dry weather or weeds with thick waxy layers, SULPRO ensures reliable control success. SULPRO contains surface-active components that lower the evaporation rate of the spray solution and simultaneously promote the ...

    By Sudau Agro GmbH based in Erding, GERMANY.

  • Cide-Kick II - Model 1285 - 1 Gallon Makes up to 256 Gallons

    Cide-Kick II is a wetting agent, sticker, activator, and penetrant all in one. Cide-Kick II is a byproduct of the forest industry, low viscosity oil. Cide-Kick II helps break down the waxy cuticle on the leaf surface and helps penetrate the bud and bark area (of the woody brush), allowing a more effective uptake of the herbicide. Cide-Kick II ...

    By NewTechBio, Inc. based in Howell, NEW JERSEY (USA). from Herbicides/Algaecides - Algae Control Product line

  • Model MYKO-TOP - Fungicide Protector

    MYKO-TOP promotes the efficacy of fungicides against ear diseases in cereals and leaf diseases in potato and sugarbeet. MYKO-TOP stabilises the fungicide protection especially against mycotoxin formation when treating the ears in cereals. MYKO-TOP is an adhesive and wetting agent with anti-drift and evaporation protection components. It prevents ...

    By Sudau Agro GmbH based in Erding, GERMANY.

  • GENEZIS - Model UAN 30%N (NITROSOL) - Nitrogen Fertilizer

    UAN is an excellent top dressing, leaf and irrigation fertilizer for cereal production and irrigated plant cultivation. It also can be used as basic fertilizer in autumn - sprayed before plowing. Uniform coverage and wetting the waxy parts of the plant enhance the degradation and humification processes of stem residues. Similarly, it increases the ...

    By Nitrogenmuvek Co., Ltd. based in Hosök tere, HUNGARY. from Nitrogen Fertilizers Product line

  • Cide-Kick

    Cide-Kick is a wetting agent, activator and penetrant all-in-one that increases the effectiveness of many of SePRO's pond and lakefront products.

    By Bioverse, Inc based in Worthington, MINNESOTA (USA). from Weed Control Product line

  • EvapoMister - Model MK1.2 - Accurate Mist Control

    Matches mist to cuttings’ needs. Versatile and simple to use for rooting and for weaning. Responds to all environmental factors affecting water loss. Automatic mist adjustment with weather and environment. Endorsed by research and nursery trials (HDC / East Malling). A key element of success with cuttings is reducing ‘evaporative ...

    By Electronic and Technical Services (E&TS) Ltd based in Bebington, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you