Liquid Manure Pump Equipment In Europe
-
Manufactured by VM Tarm a/sbased in DENMARK
Our liquid manure tankers and liquid manure trailers are supplied in different sizes and with PLC control systems and radio control. Tank, chassis, crane and piping are all in stainless steel. Time is money, so we have strong focus on pumping capacity. We offer three types of pump systems, to ...
-
Manufactured by Hugo Vogelsang Maschinenbau GmbHbased in GERMANY
Optimum use of the impact of direct hosing. Umbilical application systems with no additional liquid manure transport vehicle are highly efficient alternatives, particularly for operations with large fields. Instead of being transported in a tanker, the liquid manure is pumped directly to the field via a pipework ...
-
Manufactured by Holaras | Hoopman Machines B.V.based in NETHERLANDS
The -holaras- manure mixers, Gigant, Super Gigant and Mammoet allow you to pump liquid manure without problem and spread it on the land in a well-mixed condition. A special mixing cylinder is used for highly effective intake of the manure. Only -holaras- mixers come with the unique patented, yaw-resistant ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
This is a standard Bauer pump mounted on the front with a 6m whisk on the rear. With 600m of 6" and 400m of 4" this unit can maintain a very acceptable output of 170 m3/hr with an engine RPM of 1450, that's ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Slurryquip recommends Bauer pumps based on the output, reliability and superior build ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Slurryquip have developed a unique remote control system enabling pump and compressor to be operated from the field, providing the operator with a much more controlled ...
-
Manufactured by Slurryquipbased in UNITED KINGDOM
Tractor gear pump with adjustable cutter flange. Spiral housing of GG25. Suction flange with ribbed inlet and irrotational function. High consistency impeller with blades - 2600min-1. Thick matter impeller of spheroidal graphite iron with hardened cutting edges. Cutting flange made of chromium steel casting. Compact spur gear box with ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
LJM´s pump programme complies to all demands and we have pumps ranging from size 1.5 to 18.5 kW. LJM pumps are used in storage tanks, reception pits, collecting tanks or similar where difficult media have to be ...
-
Manufactured by Maschinenfabrik Meyer-Lohne GmbHbased in GERMANY
They serve as high-performance supply vehicles from the liquid manure- / fermenting substrate stock to the edge of the field. The high percussive force with favourable operating costs contributes substantially to the fast, clean and environment-conscious transport of liquid manure / fermenting ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
DPAS S090 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer tanks. ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
DPAE S100 is also available in 3x230V on request. DPAE S100 is a small pump and is very suitable for liquid manure and for installations in reception pits and small mixer ...
-
Manufactured by Agronic Oybased in FINLAND
Agronic LP 125 is a tractor-operated two-phase flow slurry pump. A hydraulic pump at the end of a hose efficiently pumps slurry to a six-winged PTO pump which again pumps the slurry forward. Pumping is possible in places which are inaccessible for regular pumps. The hydraulic ...
-
Manufactured by Mastek Ltdbased in IRELAND
The umbilical method of manure/slurry handling involves pumping the liquid from a liquid storage facility (lagoon or tank) using a high-pressure pump unit, via a pipeline, to a tractor mounted applicator unit. Once the system is set up and the pipeline has been laid, the pump is started and the ...
-
Manufactured by Agriprom BVbased in NETHERLANDS
Agriproms’ AG2-type centrifugal slurry/manure pump with air-cooled electric motor is ideal for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a special valve plate to switch between the two ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft for stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a three-way valve to switch between the two ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
High Pressure ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you