Only show results available in Virginia? Ok

livestock feeding equipment Equipment

  • Model 9`` - Snap Feeder with J-hook

    9' Snap Feeder with J-hook. Kane Snap Feeders are designed for supplemental feeding in the farrowing crate area and come in a 4 inch/10 cm and 2 3/4 inch/7cm Low Profile (LP)model. The Positive J-Hook locking device allows for quick and easy installation to all types of flooring while the economical feed-saver lip and grill significantly reduces ...

    By Kane Manufacturing Company. Inc. based in Des Moines, IOWA (USA). from Livestock - Feeding Equipment Product line

  • Sure Start Creep Feeder

    This feeder is made of double-walled high-density polyethylene and designed to start baby pigs on a dry food diet as early as 2 days old. A very small amount of feed is placed in the tray 4 to 5 times a day for approximately 3 days. Designed to feed two litters at once, the center groove holds the feeder in place under the creep divider. Remember, ...

    By Kane Manufacturing Company. Inc. based in Des Moines, IOWA (USA). from Livestock - Feeding Equipment Product line

  • Large Milk Replacement Feeder

    To strengthen weak piglets and supplement large litters, our translucent high-density polyethylene milk replacement feeder is just what you need to protect your investment. Kane's unique one-piece construction creates a vacuum feeding system that maintains a half-inch of milk in the trough. Monitor consumption through the translucent polyethylene ...

    By Kane Manufacturing Company. Inc. based in Des Moines, IOWA (USA). from Livestock - Feeding Equipment Product line

  • Small Milk Replacement Feeder

    with Bracket - 12 3/4' X 3 1/4' x 17 1/4'. To strengthen weak piglets and supplement large litters, our translucent high-density polyethylene milk replacement feeder is just what you need to protect your investment. Kane's unique one-piece construction creates a vacuum feeding system that maintains a half-inch of milk in the trough. Monitor ...

    By Kane Manufacturing Company. Inc. based in Des Moines, IOWA (USA). from Livestock - Feeding Equipment Product line

  • Pride Of The Farm - Model F60G (60-bushel) - Flowmatic Capacity Feeder

    Cast iron troughs. Stainless steel dividers and rain sheds. 12 feed openings. Feed opening is 9.5 inches x 10.5 inches. Trough diameter is 55 inches. Height with cover is 67 inches. Hopper diameter is 57 inches. Super-tough non corroding trough lids controls nose stress, thus the normal nose and mouth abrasions cause by frozen metal are ...

    By Cowco, Inc. based in North Vernon, INDIANA (USA). from Livestock Equipment Product line

  • S.I. Feeders - Mini Semi-Stationary Bunk

    Feeds calves up to 500 lbs. Use inside or outside. Easily moved. Adjustable legs allow the bunk to grow with the calves. Legs are shaped to resist freeze down. Popular use for sheep. Feeds hay, grain, and silage. Feed savings from our functional slant bars. Feed savings edge-top of bunk is folded in and down. Heavy steel pan is one piece for ...

    By Cowco, Inc. based in North Vernon, INDIANA (USA). from Livestock Equipment Product line

  • Elevated Calf Stalls

    Allows for controlled handling and feeding of bottle calves.  Raises calf up, out of contact with mud and manure.  Reduces space requirements and cost as opposed to hutches.  Helps to insure best possible growth rate and survivability of calves.  A better, more profitable way to bring veal calves to market, or get your ...

    By Watkins & Sons Manufacturing, Inc. based in Linden, TENNESSEE (USA). from Livestock Equipment Product line

  • Model 4 T/H - UP/4 - Feed Production Unit

    UP4 is the ideal solution for farms and industries who wish to produce directly feed for their livestock (cattle, poultry, pigs, sheeps, etc) in a compact-sized plant at a price that is easy to recover. The dozens of units produced so far are proving that  UP4 fully satisfies those requirements. The drawing illustrates an UP4 with its basic ...

    By MULMIX S.p.a. based in Campo San Martino (Padova), ITALY. from Feed Product line

  • Nifty - Feed Dispenser

    The Nifty Feed Dispenser allows one person with a round bale handler, 3 PTH tractor, or Trailer style feeder, to load, transport and dispense grain, cake feed, pellets or supplements to livestock under range feeding conditions.

    By Nifty Livestock Equipment Ltd. based in Veteran, ALBERTA (CANADA). from Feed Equipment Product line

  • Stationary Hammermill

    Hammermills offer a consistent uniform particle for better feed rations. During feed processing there are a number of ingredients that require particle size reduction which will improve the performance of the ingredient and increase its nutritive value.  Art’s Way’s unique hammermill design offers a more even grind for better feed ...

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from Livestock Equipment- Stationary Grinders Product line

  • Stationary Rollermill

    Today’s feeding operations are now recognizing the advantages of rolled grain. Art’s Way’s Rollermills provide you with efficient milling for top quality feed from your corn or small grains and does it with lower horsepower requirements. Rolling feed minimizes dust while providing more palatable and digestible feed for improved ...

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from Livestock Equipment- Stationary Grinders Product line

  • Headlock Manescape

    Fits directly unto the end of any safety headlock. Gives easy access to and from the livestock area. Animals can feed through the opening unhindered. Useful escape route for workers from aggressive animals. Fully galvanised

    By Teemore Engineering Ltd based in Co Fermanagh, UNITED KINGDOM. from Cattle Equipment - Feed Barriers Product line

  • Cattle Maxx - Model 6105 - Portable Grinder Mixers

    Art’s Way Cattle Maxx offers today’s beef and dairy operations rolled feed in a quality and consistent ration mix. Art’s Way Rollermills provide you with efficient milling for top quality feed from your corn or small grains with lower horsepower requirements. Rolling feed minimizes dust while providing more palatable and ...

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from Livestock Equipment- Portable Grinder Mixers Product line

  • Te Slaa - Hay Wagons

    Te Slaa Hay Wagons are the solution to your hay-feeding needs. A feed saving design on a rugged, mobile platform helps conserve feed costs and allows you to move your hay bunk as easily as you move your livestock. This wagon feeds round bales, large square bales, ground hay, silage, and grain.

    By Te SLAA Manufacturing LLC based in Hull, IOWA (USA). from Hay Feeding & Moving Equipment Product line

  • Model 6140 - Grinder Mixer

    The 6140 Grinder Mixer, equipped with a 140-bushel tank, provides the producer an excellent option for grinding feed rations. Not only does the 6140 model have a large capacity tank, it features 72 hardened 4-way reversible hammers for a high speed, consistent and uniform grind. The self-contained hydraulics provides a smooth operation and maximum ...

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from Livestock Equipment- Portable Grinder Mixers Product line

  • Model PHM26 - Portable Hammermill

    Now, the producer can efficiently grind corn and small grains at any location on his farm. Moving his grinding operation from one side of the building to another, from one site to another, can easily be done with the portable version of the Art’s Way Hammermill.

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from Livestock Equipment- Portable Grinder Mixers Product line

  • Model 6530 - Grinder Mixer

    It’s not just the largest in the industry, it is also the best and most productive grinder on the market today. The portable 6530 grinder mixer from Art’s Way features a gigantic 165-bushel tank with a one-piece 26-inch hammermill. This 4-ton mixer is easily configured to meet the needs of your specific livestock operations, and ...

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from Livestock Equipment- Portable Grinder Mixers Product line

  • Dry Feeding Systems

    As a market leader in this field, TEWE Elektronic develops, produces and assembles systems for a wide range of applications in the agricultural sector, such as feeding, mixing, dosing and conveying systems.The dry feeding technology plays an important role in modern livestock husbandry.In this area TEWE Elektronic is one of the market leaders in ...

    By TEWE Elektronic GmbH & Co. KG based in Vreden, GERMANY. from Feeding Systems Product line

  • Model H514/4 - Feed Silo

    Feed silos are designed for feed and bran warehousing. They are necessary on livestock farms as well as swine and poultry farms. Michał silos are made from high quality steel with zinc covering. Appropriate thickness of sheet metal together with solid structure make silos durable. Separate parts of a silo body are joined with the help of ...

    By MICHAL based in Wysokie, POLAND. from Feed Silo Product line

  • Trailed Hog Feeder

    250kg hogg feeder. 8 feet long on legs, or with wheels and a jack, suitable for towing behind an ATV.

    By Penderfeed Livestock Equipment based in BERWICKSHIRE, UNITED KINGDOM. from Sheep Feeding Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you