Livestock Handling System Equipment
-
Manufactured by Condon Engineering Ltdbased in IRELAND
The Post and Panel is the ideal option in creating a cattle ...
-
Manufactured by Condon Engineering Ltdbased in IRELAND
Hoof Pairing Crate allows the farmer to keep foot trimming up to ...
-
Manufactured by Condon Engineering Ltdbased in IRELAND
Chequer plate floor for front 8 foot. Second section rotates into a pair of 8 foot sections for transport. 3 point linkage and pallet fork attachments. Semi-Auto gate and slam back gate as standard 2 bar c-section gate. ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
This system was built by Mark Deesing, Grandin Livestock Handling. Systems, Inc., and is used as a model for contractors, and ranch owners to visit. It was custom designed to fit the site and adjacent to a calving barn. Cattle load out by moving through the system then onto a stock trailer chute at the end of the ...
-
Manufactured by Real Tuff Livestock Equipmentbased in USA
Make life easy with the No Corner Crowding Tub from Real Tuff. Specs on the Cornerless Crowding Tub from Real Tuff Livestock Equipment: The cornerless crowding tub is an excellent addition to any livestock handling system. Real Tuff’s tub features solid sides which help cattle stay focused. The design assists cattle to move ...
-
Manufactured by W-W Manufacturingbased in USA
Start with a basic 310 (10 ft. wide) or 312 (12 ft. wide) E-Z-Duz-It System and customize your system by adding gates and panels to meet your sorting, holding and pen size requirements. All Corral Gates and Panels in the E-Z-Duz-It livestock handling system are constructed from 2″ x 14 gauge high tensile ...
-
Manufactured by Premier Livestock Handlingbased in UNITED KINGDOM
with electronic weighing and / or EID to create a complete livestock handling ...
-
Manufactured by R.E. Buildings Limitedbased in UNITED KINGDOM
R.E. Buildings are specialists when it comes to designing, manufacturing and distributing high quality internal agricultural equipment to suit all of your needs. This equipment includes livestock cubicles, handling systems and livestock welfare solutions, and all of it is especially chosen for its proven standards of ...
-
Manufactured by Pearson Livestock Systemsbased in USA
Utilizing the same design principles that have made Pearson a leader in the livestock handling systems for over 50 years, the Pearson Rancher provides enhanced efficiency and power to the operator using hydraulics. Our vertical sides allow cattle to move into the chute easily and stand in a natural position. Our hydraulic cattle ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
Cattle Corral with curved single-file chute (race) and round crowd pen. The fence posts are all 2-7/8-ini' (7.30cm) O.D. used oil field pipe. In the areas with solid fence, the maximum distance between the fence posts is 4-feet (1.2m). Space posts no more than 8-feet (2.5m) apart in areas of the corral where the fence is not solid. The raised concrete platform on the inside radius of the single ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
The single file chute (race) enters a small 24-feet (8m) x 30-feet (10m) covered work area over the squeeze chute. Doors at both the entrance and exit to the building allow the building to be closed and locked when not in use. The building is small enough to heat in the winter, and ventilated to keep people handling cattle cool in ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
A curved cattle handling system works on the principle that cattle always prefer to return to where they came from. Cattle in the wide curved lane on the right side of the photo move willingly towards the crowd pen in the center. From the crowd pen cattle then move into the single file chute on the left side of the photo towards the squeeze ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
Half circle concrete crowd pen in large cattle slaughter plant. A single file chute 30-inch (76.20cm) wide and 66-inches high (167cm) is used. The round crowd pen is efficient because it takes advantage of the natural tendency of cattle to go back where they came ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
A 30 degree funnel into the single file chute does not look dead-ended to the cattle. The cattle enter the single file chute with a minimum of encouragement from the handler with the flag stick on the outside of the crowd pen. An auxiliary chute is used to prevent breaks in the line if an animal goes down in the primary chute. ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
Selector gates in the crowd pen direct cattle into either the single file chute toward the squeeze chute (crush), to the large truck (lorry) loading ramp, or into a stock (utility) trailer chute. This facility also has a single file chute leading to a row of palpation chutes for students to practice palpating cows for pregnancy testing, or for artificial ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
Colorado State University Cattle Research Station (ARDEC). This facility is a good model for a small to medium sized feed yard handling system. The radius for the wide curved lane is 20-feet (6.5m). The solid sided wide curved lane hold approximately 50 cattle. Cattle move through the curved lane into the crowd pen. From the crowd pen cattle ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
Curved Cattle Handling System on a cow-calf operation in Wisconsin, USA. Waseda Farms is an organic beef farm located in Door County. The squeeze chute is inside the covered work area. Visit wasedafarms.com for more information on this ...
-
Manufactured by Deesing Livestock Handling Systemsbased in USA
Large high speed Cattle slaughter plant serpentine. The facility is designed with a revolving double gate system in the crowd pen and two single file chutes (race). One chute is the primary; the second auxiliary chute is used in the case of an animal down in the primary chute. Each chute is 30-inches (76.20cm) wide, and 66-inches (167cm) ...
-
Manufactured by Moly Manufacturing Inc.based in USA
This single alley FZA (Flight Zone Avoidance) system combines two of our patented products - the TurretGate™ and a SILENCER® hydraulic cattle chute. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you