Manure Application Equipment Available In Virginia
-
Manufactured by Valmetalbased in RUSSIA
The Double-Disc Applicator is your best choice when working in stony ground or in very difficult trash where manure injection may not be possible. Manure is banded on the surface and then covered with soil carried up by the discs to prevent “burn off” of volatile nutrients. The Applicator leaves the ...
-
Manufactured by Cadman Power Equipment Ltd.based in CANADA
Side-Dress Liquid Manure With Hard Hose Row Crops During The Growing Season. Cadman has taken a concept brought forward by the Alig brothers of Ohio to design, build and market a new Continuous Manure Applicator (CMA) which is engineered to apply liquid manure via side-dress to row crops such as corn in fields as long as a ...
-
Manufactured by Oxbobased in NETHERLANDS
The design of the 5-wheel steered unit with a mechanical driven double rear bogie axle combined with the hydraulically driven front wheel, enables a short turning radius without friction. The weight per wheel is very low while the ride and comfort level is extremely good because of the wheelbase and cab ...
-
Manufactured by Cross Agricultural Engineering Ltd.based in IRELAND
Cross Agricultural Engineering Dribble Bars are top of the range when it comes to slurry application. With a lot of extra features as standard that are not even an option with other manufacturers, the Cross dribble bar stands out ahead of the rest when it comes to technology. ...
-
Manufactured by Valmetalbased in RUSSIA
We call them 'Farm Duty', and we know that means 'Heavy Duty so AUTO-TRAC Steerable Manure Tankers share many of the features found in our Commercial Series tankers. The full-length independent trailer means that the towing forces are not carried by the tank body...less stress is always good. The tank may be easily repositioned to adjust the ...
-
Manufactured by Valmetalbased in RUSSIA
It’s all about getting the job done fast. Large farms and custom haulers are always working against the clock so Jamesway MAXX-TRAC spreader tanks deliver maximum performance and minimum ...
-
Manufactured by Valmetalbased in RUSSIA
Heavy Duty Tankers are built for the bigger loads. The open-type walking beam is offset 60/40 for proper load balance. The Tanker’s undercarriage uses 4’’ stress-proof axles and 16, 000 lb hubs with a choice of tire sizes: 18.4 x 26, 23.1 x 26 and 28 Lx 26. Jamesway HD models are equipped with the same massive Industrial brakes found on our largest tankers. Excellent for road ...
-
Manufactured by Valmetalbased in RUSSIA
Standard Duty Tankers are equipped with 21.5 x 16.1 flotation tires running on 3’’ stress-proof axles and 10, 000 lb hubs. The walking beam suspension smoothly carries the tanker’s weight and distributes just the right load to your tractor. Jamesway SD models are equipped with automotive-style16’’ brake discs and ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 4NHTB pump is designed with Cornell’s renowned quality and durability. It features a 4” discharge, 5” suction, and enclosed impeller. Available in All Iron or CD4MCu materials. Cornell’s patented Cycloseal® design is standard, with a Type 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide seal faces ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 4NNT pump is designed with Cornell’s renowned quality and durability. It features a 4” discharge, 4” suction, and enclosed impeller. Cornell’s patented Cycloseal® design is standard, with a Type 1 or 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide seal faces for abrasion ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 4414T pump is designed with Cornell’s renowned quality and durability. It features a 4” discharge, 4” suction, and enclosed impeller. Available in All Iron or CD4MCu materials. Cornell’s patented Cycloseal® design is standard, with a Type 1 or 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide seal ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 4NNW pump is designed with Cornell’s renowned quality and durability. It features a 4" discharge, 4" suction, single volute and two-vane impeller. Available in All Iron with the following bearing frames: F16, F16K, VC16, VF16, EM16, EM16K. Cornell’s patented Cycloseal design is standard, with a Type 1 single mechanical seal with Buna-N elastomers, stainless steel hardware and ...
-
Manufactured by Pik Rite, Inc.based in USA
Searching for a narrow application manure spreader that can tackle tracks as little as 80 inches wide? Trust Pik Rite technology and their Hydra-Ram 490V vineyard spreader. Dependable narrow application manure spreader that can tackle tracks as little as 80 inches wide! The Pik Rite 490V vineyard spreader uses trusted Hydra-Ram ...
-
Manufactured by Lowe Manufacturing Company, Inc.based in USA
Our most popular model. The LOWE G-72A is ideal for removing debris, woodlot cleanup, general agricultural applications, manure cleanup, moving bales, and clearing areas. The open bucket construction allows smaller items and dirt to sift through leaving a cleaner ...
-
Manufactured by Hugo Vogelsang Maschinenbau GmbHbased in GERMANY
Impact and flexibility with working widths of up to 36 metres. Use 36 metre traffic lanes with maximum impact for applying liquid manure. SwingMax 36 advances to a new dimension of liquid manure application. For the first time, it's now possible to spread organic fertiliser evenly at a working width of 36 metres. This makes it possible to ...
-
Manufactured by Art`s Way Manufacturing Co., Incbased in USA
the Digi-Star NT460 Nutrient Management System. To meet the growers’ need for managed and increased transparency of manure application, Arts’ Way offers a Digi-Star® NT460 nutrient management system as an option to its largest V Series spreader, the V180. Working in tandem with the spreader, the Digi-Star® NT460 system uses ...
-
Distributed by Western Farm Sales, Incbased in USA
Fast spreading while using less tractor power than conventional injectors. In a one single operation, the 22' Concave Disc Incorporator operates a soil tillage followed by a surface application of manure and mixes manure and soil into the top few inches of the surface of the soil. It is very efficient on harvested fields with a large ...
-
Manufactured by Hitchcock Incorporatedbased in USA
We use quality component parts to ensure that these units hold up to the demands of our customers. 88C chain has 34, 000 pound test strength, Hydraulic motors that generate in excess of 13,000 inch pounds of torque per motor. UHMW bearing and idle sprockets on floor chain for minimal maintenance. Units are well suited for silage, ...
-
Manufactured by Salford Barron & Brothers International (BBI)based in USA
The Endurance Truck Mount Hydraulic Spreader is perfect for Litter, Lime, Shavings, Compost, Manure and Organics Applications. This spreader is a Spinner Spreader so it will work great if you are looking for a Litter Spreader, Lime Spreader, Shavings Spreader, Compost Spreader, Manure Spreader or Organic Spreader. The BBI Binary ...
-
Distributed by Ellens Equipment, Inc.based in USA
The new V-Max Series Super Spreader is the most user-friendly spreader on the market today. The manure pattern stays low to minimize splash and wind carried manure. You can spread in any direction regardless of the wind. The Meyer spreader keeps your tractor and spreader clean. The spreader will unload fast and give you an even, consistent ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you