Only show results available in Virginia? Ok

manure auger Equipment

  • Agromatic Manure Auger

    Maximum incline of 35%. Includes 60# roller chain drive, standard hopper, automatic roller chain oiler, safety cover,  safety hopper guard, black Agrithane liner and one coat primer with enamel finish. Available 16’, 18’, 20’, 22’ and 24’ lengths. 5 HP to 7 ½ HP recommended

    By Agromatic Inc based in Fond du Lac, WISCONSIN (USA). from Manure Handling Equipment - Agromatic Manure Auger Product line

  • McLanahan - Horizontal Manure Augers

    Horizontal Manure Augers convey sand-laden manure into reception tanks or storage unit without turning the manure. Producers choosing not to use a high dilution, or flush system, to convey manure are also candidates for a Horizontal Manure Auger. Typically, Horizontal Manure Augers are installed at the cross alley (center) or end of the barn. ...

    By McLanahan Corporation based in Hollidaysburg, PENNSYLVANIA (USA). from Agricultural Product line

  • Premium

    Bi-Partite Root Auger Set

    By applying the bi-partite root auger almost undisturbed, uniform soil samples can be taken in layers of maximal 15 cm. The bi-partite root auger consists of a bottom part fitted with an exchangeable drilling-crown and a short unscrewable top part (handle) with a beating head. In lighter soil the auger can be pushed and turned into the soil. In ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Augering & Soil Sampling Equipment Product line

  • Meyer - Model V-Max Series - Manure Spreaders

    The new V-Max Series Super Spreader is the most user-friendly spreader on the market today. The manure pattern stays low to minimize splash and wind carried manure. You can spread in any direction regardless of the wind. The Meyer spreader keeps your tractor and spreader clean. The spreader will unload fast and give you an even, consistent spread ...

    By Meyer Manufacturing Corporation based in Dorchester, WISCONSIN (USA). from Auger and Convertible Apron spreaders Product line

  • Meyer - Model V-Force 7000 Series - Manure Spreader

    This CUTAWAY DIAGRAM illustrates the SUPER SPREADER'S patented rear unload design.  Material is directed straight out the large back gate of the spreader by two lower augers while the upper auger runs forward to eliminate bridging.  This system requires much less horsepower and unloading time than side discharge spreaders.  And the ...

    By Meyer Manufacturing Corporation based in Dorchester, WISCONSIN (USA). from Auger and Convertible Apron spreaders Product line

  • JBS - Narrow Body Manure Spreader

    The JBS Narrow Body Manure Spreader is fully welded, heavy duty and spreads all manure types up to 55 feet wide. It is available in either tandem or tridem axle. The Narrow Body Manure Spreader comes standard with Vertimax attachment with dynamically balanced vertical augers and a guillotine gate.

    By J. Bond and Sons Ltd. based in Mission, BRITISH COLUMBIA (CANADA). from Manure Spreaders Product line

  • Pik Rite - Model 490 - Hydra-Ram Manure Spreader

    Designed for long-lasting performance, Pik Rite’s Hydra-Ram 490 manure spreader leads the market in 250 bu capacity spreading equipment. Built around the philosophy that a manure spreader that uses traditional augers or apron chains will likely break down too often, Pik Rite has designed its 490 spreader with a highly-efficient hydraulic ...

    By Pik Rite, Inc. based in Lewisburg, PENNSYLVANIA (USA). from Manure Spreaders Product line

  • JBS - Wide Body Manure Spreader

    The JBS Wide Body Manure Spreader is one of the biggest manure spreaders on the market, it is available in both tandem and tridem axle. It has a carrying capacity of 65,000 lbs to 100,000 lbs depending on the suspension package you choose. The suspension on the Wide Body Manure Spreaders allows for great maneuverability. The Wide Body can spread ...

    By J. Bond and Sons Ltd. based in Mission, BRITISH COLUMBIA (CANADA). from Manure Spreaders Product line

  • Manure Spreader Machines

    CRAFTER Manure Spreader is designed with extraordinary linkage system that will remove the damage which may be caused by tough field conditions. This system being connected to 3 point linkage system enables the Crafter to go on working without being effected by adverse conditions such as roughness and mound that prevent the spreading operation.

    By Celikel Agricultural Machinery Company based in Selçuklu, TURKEY. from Manure Management Product line

  • Model SDS - Manure Spreaders

    The SDS (side discharge) manure spreader range is designed to handle semi-solids, sludges and slurries. The heavy duty central auger with aggressive spaced paddles prevents load bridging and ensures a constant flow of material to the spreader rotor. The SDS spreader range is designed to handle semi-solids, sludges and slurries. The heavy duty ...

    By Richard Western Ltd. based in Framlingham, UNITED KINGDOM.

  • Fliegl - Disc Cutter Appliance

    Working widths of 3,00 m, 6,00 m und 8,00 m. All types of cultivated land. Prepared seed beds. Cereal land. Uncultivated stubble.Fields with green manure. Drip stop. Suitable for mounting behind every liquid manure tank. Hydraulic liquid manure auger distribtor. Completely galvanized. Easy to maintain. Hydraulically collapsible. Adjustable ...

    By Fliegl Agrartechnik GmbH based in Mühldorf a. Inn, GERMANY. from Liquid Manure Technology Product line

  • Trident - Metering Auger

    The Trident Metering Auger precisely meters conditioned manure from the Trident 900 Rotary Screen conditioner to the Trident TSP. The Trident Metering Auger maximizes the throughput capacity of the TSP and ensures maximum efficiency and system performance to consistently produce high quality bedding.

    By Manure Systems Inc. based in Abbotsford, BRITISH COLUMBIA (CANADA).

  • Auger Pumps

    HM snails pump is designed to handle liquid manure and difficult pumpable slurry. For tractor or electric operation. HM Snails pump is constructed as the basic principles HM slurry pump, but by means of a 'reverse' pump housing and heavy feed screw in a position to handle the slurry with a high solids content.

    By Højgaards Maskinfabrik based in Lemvig, DENMARK. from Slurry Pumps Product line

  • Model XCEL - Rear Discharge Manure Spreaders

    The Hi-Spec Xcel 1250 rear discharge spreader has built a solid reputation since its launch in 2004. Initially used on Irish and UK farms it has found new markets around the world. The 2nd generation of the Xcel 1250, developed throughout 2012, features many tweaks and improvements based on our customer's feedback and experience.

    By Hi Spec Engineering Ltd., based in Bagenalstown, IRELAND. from Slurry & Manure Equipment Product line

  • Manure Spreaders

    Triffitt heavy duty rear discharge spreaders are designed to spread all types of manure in an even spread pattern, the shredder augers are PTO driven via a robust transmission system, with variable speed hydraulic drive to the discharge bed. Capacities of up to 14 metric tonnes are available with the options of horizontal shredders and slurry door ...

    By Triffitt Trailers based in Lancashire, UNITED KINGDOM.

  • Manure Spreader

    How do you build the best manure spreader in the world? Start with Degelman, renowned for building legendary equipment for the past 50 years. The design is unmistakably Degelman. After five years of design, development, and intensive testing, Degelman introduces the most rugged spreaders available - the Degelman M Series. From the ground up, these ...

    By Degelman Industries Ltd based in Regina, SASKATCHEWAN (CANADA). from Livestock Product line

  • Complete Conveying Screws

    On customer drawing, Motridal realizes complete conveying screw consisting of pipe shaft with cylindrical or conical flighting. The wide range of diameters and thicknesses and the possibility to produce and mount both sector-forged and continuous flighting make Motridal able to diversify its production in order to satisfy the requirements of the ...

    By MOTRIDAL Spa based in Piacenza, ITALY. from Augers & Spiral Flighting Division Product line

  • Model V - Manure Vacuum Scraper System

    Barns no longer need to have an integrated manure handling system during construction. The Manure Vacuum replaces the need for pumps, augers, and concrete channels to transport manure from the barn to the storage lagoon or process facility.

    By Mensch Manufacturing, LLC based in HASTINGS, MICHIGAN (USA). from Other Products Product line

  • Lowlander Widebody - Model 140 - Truck Mount Large Volume Vertical Auger

    Carrying capacity: 14 tonnes. Cubic Meters Level: 8.5m. Heavy duty fully welded construction. Handles all manure types and other materials. Widebody (965mm – 38″ dia.) dynamically balanced twin vertical augers. 1830mm Internal body width. Augers protected by rubber cushioned drive. Auger gearbox protection via shearbolt. 10mm thick ...

    By G.T. Bunning & Sons Ltd. based in Dereham, UNITED KINGDOM. from Large Volume Widebody Vertical Auger Product line

  • Powerspread - Side Discharge Manure Spreaders

    The Powerspread from Shelbourne Reynolds is the most comprehensive  range of side discharge manure spreaders available with the ability to spread all types of farmyard dung including dry poultry litter and industrial wastes accurately and with a fine fragmentation.

    By Shelbourne Reynolds Engineering Ltd based in Bury St Edmunds, UNITED KINGDOM. from Livestock Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you