Refine by
Manure Injection Systems Equipment & Supplies
13 equipment items found
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
Series 70 Chisel Point Sweeps are designed to penetrate frozen soil. 1/2" thick Chisel Point Sweep Shank combined with 62 degree swept back wings results in minimum soil disturbance and allows shallow placement of nutrients. The sweeps are designed with thin Vertical Portion Hi Carbon steel to minimize soil disturbance at high speeds. To prevent breakage, the sweeps are attached to a 1-1/4" x 2" ...
Manufactured by:Vertical Till Injector LLC (VTI) based inWashington, INDIANA (USA)
We manufacture complete manure injection systems that are 100% tailored to our clients needs. We pride ourselves on being second to none, and on paying an extremely high attention to detail. If you can dream it, we can build ...
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
Unique Swivel-Mounted Conical Blades enter the soil in the direction of travel ahead of the spindle and move soil laterally behind the spindle. Does not create excessive side load on mounting or tank. Widens slot for nutrient placement. Use on all Rotary Injectors & with Rotary/Sweep ...
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
The Dietrich Slurry Clozr is a premium unit for trouble-free performance, not budget designed. Designed to be used continuously as part of the Dietrich Conical Blade Rotary Sweep Injection System or as desired with the Dietrich AR Slurry Sweep ...
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
The Dietrich Slurry Clozr is a premium unit for trouble-free performance, not budget designed. ...
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
This complete injection system includes the Dietrich Series 70 Assembly with 800# Down Pressure Coulter Assembly, Coulter Mount, 13 Wave Swivel Conical Blade, 4" Rotary Injection Discharge Tube & Bracket, your choice of Chisel Point Sweep & Discharge Tube, and the Dietrich Clozr with choice of Notched ...
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
Shown with standard 3" tube. 8" Wing width. Designed for hi speed (5 - 8 mph) and lower rates (2,500 - 5,000 gallons per acre) to meet the E.P.A. Phosphorus Rules. Lifts the soil less than 1". Vertical shank portion is 1/2" thick. The 8" Low Rate Sweep moves less soil, allowing higher speeds at low ...
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
Shown with optional 3-1/2" tube and clip (2-1/2" hose fits inside). 8" Wing width. Designed for higher rates (5,000 - 10,000 gallons per acre). Lifts the soil than 1-1/4". Vertical portion 1" thick at the lower rear to create a wider slot to facilitate the filling of the soil cavity created by the wings. The 8" Hi Rate Sweep parts the soil more and creates a larger soil cavity than the 8" Low ...
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
Shown with optional 4" tube and clip (3" hose fits inside). 12" Wing width. Designed for higher rates (10,000 - 15,000 plus gallons per acre). Lifts the soil less than 1-14". Vertical portion is 1" thick at the lower rear to create a wider slot to facilitate the filling of the soil cavity crated by the wings. The 12" Hi Rate Sweep parts the soil more and creates a larger soil cavity than the 8" ...
Manufactured by:DSI Inc based inGoodfield, ILLINOIS (USA)
Shown without tube. 12" wing width. Designed for higher rates (20,000 plus gallons per acre). Rear extensions provide higher lift to create a larger ...
Manufactured by:Gates Manufacturing based inLansford, NORTH DAKOTA (USA)
Gates Manufacturing has equipped Mounted Magnum Sections on many makes and models of chisel plows, cultivators, disks, and rippers; even manure injection systems and road graders! If we haven’t done it yet, we can work with you to develop the mount system for your application. We mount up to John Deere, Case, Sunflower, ...
Manufactured by:Bazooka Farmstar based inWashington, IOWA (USA)
In a market full of high rate solutions, we’ve designed a solution that puts a large volume of liquid manure in the ground (2.5 – 20K+), and in an environmentally acceptable fashion. The next-generation Phantom injection unit is similar in look and design, with enhancements that provide a new competitive Edge to the ...
Manufactured by:Cadman Power Equipment Ltd. based inCourtland, ONTARIO (CANADA)
Cadman's front-folding hydraulic manure injector is a first of its kind. What makes this these models special is the ability to fold from either 30’ or 40'- depending which model you choose - down to 11’ wide for safe highway travel, moving from field to field. By using a manure injector farmers have ability to place nutrients directly into the seedbed limiting the chance of spilling. ...