Manure Pump Equipment Available In Virginia
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
A multifunctional 6" inch tractor-driven manure pump for the agricultural sector. For pumping liquid slurry, ditch water or simply for irrigation. The B140 is a self-priming pump with a large solids passage, a lot of capacity, as well as significant pressure. Just fill the pump housing with water and the ...
-
Manufactured by Euromacchine Srlbased in ITALY
Cornell high operating pressure pumps are specifically designed for coarse abrasive slurry applications such as sand, gravel and manure. Cornell manure pumps are iron and ductile iron construction with hard face mechanical seals for extended seal life. Optional materials are available for abrasive ...
-
Manufactured by DM Machinerybased in CANADA
DM Machinery Inc, has developed the new DM 3-pth pump, to its line up. Light weight, flexible and pivoting, this new DM pump has gone one step over and beyond in the agitation and loading of liquid or semi-liquid manure ( hog, cow and municipal waste...etc.) This pump will out perform all other makes in the ...
-
Manufactured by Daritech, Inc.based in USA
Our GreenLine pumps follow in the DariTech tradition of bringing value to dairies throughout North America by providing long wearing, highly efficient solutions to the many challenges that manure handling presents. Our pump line offers a broad selection of innovative features for demanding dairy applications. With the ability to configure ...
-
Manufactured by Demir Packing & Agricultural Machinerybased in TURKEY
It enables you to discharge the manure mixed homogenously from the manure hole to an intended place. Our conditions like manure holes. Platform on which pump is installed produced according to depth size of your manure ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° ...
-
Manufactured by Teamcobased in CANADA
The teamco pre-pits pump is entirely made of stainless steel, including the ball bearings. It is designed for hog manure and other low-fibre liquids. Its shredding 6 inche impeller is complemented with a 2 inches pivoting stirring nozzle. The pumping operation is done though a 4 inch pipe. Greasing points are located near the electric ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
Conventional centrifugal pumps only have one discharge on the housing. That means that for every rotation of the fan, the pump is wasting power by trapping manure and not allowing it to easily get out of the housing. By adding multiple outlets, the manure is able to get out of the housing faster, resulting in ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft for stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a three-way valve to switch between the two ...
-
Manufactured by Agriprom BVbased in NETHERLANDS
Agriproms’ AG2-type centrifugal slurry/manure pump with air-cooled electric motor is ideal for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a special valve plate to switch between the two possible operations of pumping or mixing. The agitation ...
-
Manufactured by Nuhn Industries Ltd.based in CANADA
The Nuhn Triple Port Pump is an animal of a pump! I've been pumping manure since 1996, and over that time I've operated many other makes of pumps. Nuhn pumps are hands down way better than the competitor. Their pumps are more reliable, have better performance and are user ...
-
Manufactured by Erich Stallkamp ESTA GmbHbased in GERMANY
Stallkamp long-shaft centrifugal pumps are heavy duty and are perfectly suitable for reception pits and manure pits to a depth of 6 m. Either with sturdy electric motors (up to 22 kW/30 PS) or PTO-driven, Stallkamp longshaft pumps are a powerful and longlasting centrepiece especially for manure and biogas plants with both fixed ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER2-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a special valve plate to switch between the two ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
High Pressure ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages. The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is ...
-
Manufactured by Beijing Goke Agriculture Machinary Co. Ltd.based in CHINA
Manure Pump 'Mixer' Manure Collect Tank and Fermentation ...
-
Manufactured by DM Machinerybased in CANADA
Here is the new DM manure pump, the most efficient on the market. Reduce your mixing time with less horsepower with the new 2 mixing screw (patented). The pump is designed to run with a tractor from 130hp to 300hp, try it and you will see, you'll impress everyone who will see you work. A two and four wheel model exist, the latter used as a ...
-
Manufactured by Euromacchine Srlbased in ITALY
Our motor pump unit combines high quality Bauer pumps with best efficient engines and 100% customizable solutions. The reliability and resistance of this product, combined with our strong structure tankframe represents the perfect fusion to give you always what you ...
-
Manufactured by DM Machinerybased in CANADA
Here is the DM tranfert pump. Powered by an electric motor and available from 6 to 12 feet. Completely galvanised, it will perform its task for several years without any hassles. The electric motor ( 5hp - 7.5hp) transmit the rotation to the impeller at the bottom of the pump with 2 straps and a steel ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you