Only show results available in Virginia? Ok

Manure Removal equipment

  • Manure Removal System

    A properly designed manure removal system is a necessary condition for production efficiency. Indoor microclimate and animals’ health depend on the operation of manure removal system. There are several types of manure removal system including mechanical, hydraulic and combined systems. Currently, the self-floating manure removal system with ...

    By Variant Factory Ltd. based in Kharkov, UKRAINE. from Manure Removal Product line

  • Self-Floating Manure Removal System

    There are concrete tanks 0,4-0,6m deep under the machines with grating where all animals’ excrement flushing water for cleaning and disinfection machines run. There is a system PVC sewer pipeline mounted under the tanks. There are saddles in the tanks with plugs closely fitted to the hole. The plugs can be easily lifted by a hook. The liquid ...

    By Variant Factory Ltd. based in Kharkov, UKRAINE. from Manure Removal Product line

  • Manure Removal Systems

    Self-tightening wire-type cowshed and piggery cleaners for installation under slatted floors. Maintainable, reliable and easy to operate. The Domino wire-type cowshed and piggery cleaners are self-tigtening. This is because two drawing stations are always used as well as a combination of rope and wire. The rope is the flexible part and the wire is ...

    By Domino A/S based in Tørring, DENMARK. from Products for Cattle Product line

  • Manure Removal System

    The Stacked Cage System has manure collecting belts made of polypropylene, located between each tier. These collect the waste of the day and when put in motion carries it to the end of the house, where it's deposited on a cross conveyor that take it outside the house. The A-Frame Cage System is equipped with p

    By Alaso based in Lakeland, FLORIDA (USA). from Accessories Product line

  • Manure Auger

    Heavy duty (3/16' flighting):  9' or 12' auger. Light duty (3/32' flighting):  9' auger. Electric drive (5 or 7-1/2 HP) or PTO drive (with flex joint coupling & heavy duty #60 chain reduction drive). Heavy duty universal floor to riser connection. 10, 12, or 14 gauge galvanized floor trough (bolted couplers). 12 gauge galvanized ...

    By FDI Cage Systems based in Mitchell, ONTARIO (CANADA). from Manure Removal Product line

  • Cable Pit Cleaners

    Maximum speed 50 feet per minute. Cable 5/16 stainless steel. Drive Unit: 1-1/2 or 2 HP motor. Start/stop control, manual, semi-automatic, or automatic. 10' dia. 5 groove drive for reduced cable flexing and slippage. Corner Wheels: adjustable cable tensioning. Flexible installation: lagged or cemented. Scraper Blades: custom width and heights . ...

    By FDI Cage Systems based in Mitchell, ONTARIO (CANADA). from Manure Removal Product line

  • Manure Spreader Machines

    CRAFTER Manure Spreader is designed with extraordinary linkage system that will remove the damage which may be caused by tough field conditions. This system being connected to 3 point linkage system enables the Crafter to go on working without being effected by adverse conditions such as roughness and mound that prevent the spreading operation.

    By Celikel Agricultural Machinery Company based in Selçuklu, TURKEY. from Manure Management Product line

  • Crosetto - Model CMCS60 - Manure Spreader

    Single axle manure spreader, m. 4,50x2,00, with hydraulic brakes. Frame made of S235 EN 10025. 8 holes heavy axle with oversized bearings. Oversized crossbeams for loading bed’s support. Bottom and sides made of larch or iron. Inside front slide. 3 P90 cemented d. 12 chains. Our type central reduction gear with 1” lateral chain with ...

    By Agrimec by Crosetto Elio & C based in Marene (Cuneo), ITALY. from Manure Spreaders Product line

  • Vertical Manure Spreaders

    Constructive Features: Sides painted welded thickness 3 mm - vertical spiral roller - electrical equipment - gear shaft - mechanical chains.

    By Mutti Amos Macchine Agricole Srl based in Asola (MN), ITALY. from Manure-Spreaders Product line

  • Model N267/1 – 6t - Manure Spreader

    The N267/1 manure spreader with the loading capacity of 6T on a double suspension is equipped with a four drum vertical adapter tilted forward, which guarantees an even, wide spreading of manure. The drums spin in pairs in opposite directions ( looking from the rear of the machine – two right ones – counter clockwise, two left ones ...

    By METAL-FACH Sp. z o. o based in Sokółka, POLAND. from Manure Spreaders Product line

  • Model STE 70 - Manure Spreader

    DLG - controlled distribution acuracy (fine spreading mechanism with 4 standing rollers) spreading system: - removable - electronically balanced - screwed traction prongs (privotable) galvanised, robust scraper floor chains .Danfoss-hydraulics with continuous adjustment of speed forward + backward wear-resistant base (resin coated plywoodtes)

    By OEHLER Maschinen Fahrzeugbau GmbH based in Offenburg, GERMANY. from Manure Spreader Product line

  • Model STE 60 - Manure Spreader

    DLG – controlled distribution acuracy (fine spreading mechanism with 4 standing rollers).spreading system: · removable · electronically balanced · screwed traction prongs (privotable).palvanised, robust scraper floor chains.Danfoss-hydraulics with continuous adjustment of speed forward + backward wear-resistant base ...

    By OEHLER Maschinen Fahrzeugbau GmbH based in Offenburg, GERMANY. from Manure Spreader Product line

  • Model N-218 - Manure Spreaders

    The N-218 and N-228 spreaders are intended to spreading manure, peat and compost. After removing the adapter and installing the rear side they can also be used to transport agricultural produce. They cooperate with tractors equipped with lower transport hitch. They are produced in version with horizontal two-drum adapter. The N-218 spreader is ...

    By URSUS S.A. based in Lublin, POLAND. from Manure Spreaders Product line

  • Model N-228 - Manure Spreaders

    The N-218 and N-228 spreaders are intended to spreading manure, peat and compost. After removing the adapter and installing the rear side they can also be used to transport agricultural produce. They cooperate with tractors equipped with lower transport hitch. They are produced in version with horizontal two-drum adapter. The N-218 spreader is ...

    By URSUS S.A. based in Lublin, POLAND. from Manure Spreaders Product line

  • Biolynk Systems

    DariTech is pleased to introduce its Biolynk system for the management of flush manure. From 100% manure collection in freestall operations to specialized use of parlor water in scrape systems, Biolynk will deliver the highest quality flush water along with superior solid capture rates.  DariTech first developed the Biolynk system to serve a ...

    By DariTech, Inc. based in Lynden, WASHINGTON (USA). from Manure Separation Product line

  • Air Blowing System with Turbines

    Using the hot air in the building, the system compresses the air and conveys it into turbines that push it towards perforated pipes, laid lengthwise along the cages.The holes in the pipes ensure uniform drying of the manure and adequate ventilation on each tier of the cage, increasing animal well-being.

    By Tecno Poultry Equipment Spa based in Padova, ITALY. from Drying Chicken Manure Product line

  • Pull-Type Tractor Manure Spreaders

    For all of you who want to pull behind a tractor in the field, our Heavy Duty/Industrial Pull Type Manure Spreader has provided 18 years of excellence. Spread-All is built to last, but built for convenience. Our pull types include special features such as an easily removable bolt-on hitch, a white spoke

    By West Point Design, Inc. based in West Point, NEBRASKA (USA). from Spread-All Manure Spreaders Product line

  • Model R810 - Manure Spreader

    With a 486 cubic ft. capacity, the R810 model is the largest spreader in the H Series.  This pull type material spreader needs a minimum of 180  HP to transport materials and spread as needed. Built rugged and solid to be the most reliable spreader on the market. Primarily made to spread manure, the dual horizontal beaters provide a ...

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from LivestockManure Spreader Product line

  • Model R2024 - Manure Spreader

    Art’s Way HV Series truck mounted spreaders feature a super slippery floor with reversible apron to handle obstructions and keep you going. Apron speed is adjustable, and vertical beaters are removable. Model 2024 discharges at 20 gal/minute @3000 psi for manure, 60 gal/minute of forage. The electronic over hydraulic controls are ...

    By Art`s Way Manufacturing Co., Inc based in Armstrong, IOWA (USA). from LivestockManure Spreader Product line

  • Trident - Model 900 - Manure Separator

    The Trident 900 Manure Separator with Posi-Track is designed specifically for Sand-Laden Manure (SLM) animal manure. It is a simple and efficient rotating screen separator that operates in any SLM applications Scrape,  Flush or Flush Flume. Excellent resistance to abrasion, exceptional flow characteristics and superior solid removal makes the ...

    By Manure Systems Inc. based in Abbotsford, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you