Manure Spreader Equipment Available In Africa
-
Manufactured by West Point Design, Inc.based in USA
Twisted, concave chisel teeth act as hands, pulling and throwing the material instead of beating it. Smaller particles give a finer spread. Options available to maximize your distributor's potential. Durability - Spread-All is built to last. Up to 40' of spread - allowing for all kinds of manure and other uses. Can be easily ...
-
Manufactured by BICCHI S.r.l.based in ITALY
Manure spreaders with 2 medium-giant vertical beaters, monoaxle. Hydraulic conveyor. Front net side for protection. Oil bath transmission on ball bearings. Cardan shaft. Hydraulic inner gate, on request. Rear protection door (mechanical), on request. Hydraulic or pneumatic ...
-
Manufactured by Bossini S.r.l.based in ITALY
Container dimensions: Lenght: 7 mt; Height sides: 1,25 mt ÷ (with extension-sides 1,6 mt). Load capacity 16 ÷ 20 m3. Air brakes, hydraulic or both air/hydraulic. EC European Certification. Patented hydraulic suspension with new torpress 3 sectors with rings and multilayer membrane for heavy use. New connecting pipes increased Ø 65 mm. Nr.3 increased axles with 10 industrial ...
-
Manufactured by Bossini S.r.l.based in ITALY
Container dimensions: Lenght: 7 mt; Height sides: 1,5 mt ÷ (with extension-sides 2 mt). Load capacity 26 ÷ 34 m3. Air brakes, hydraulic or both air/hydraulic. EC European Certification. Patented hydraulic suspension with new torpress 3 sectors with rings and multilayer membrane for heavy use. New connecting pipes increased Ø 65 mm. Nr.3 increased axles with 10 industrial ...
-
Manufactured by Chioda Daniele & C. S.n.C.based in ITALY
Chioda Daniele & c snc produce and sell a wide range of Rear manure spreaders. Models with vertical, horizontal beaters. Standard models go from 1,5 till 30 cubic meters. Homogeneous distribution of the material between 4 and 24 m. Models with one, two, three axles, pneumatic brakes, tandem, tridem suspension, mechanical or hydraulic ...
-
Manufactured by METAL-FACH Sp. z o. obased in POLAND
The N267/1 manure spreader with the loading capacity of 6T on a double suspension is equipped with a four drum vertical adapter tilted forward, which guarantees an even, wide spreading of manure. The drums spin in pairs in opposite directions ( looking from the rear of the machine – two right ones – counter clockwise, two left ...
-
Manufactured by A-Lima-Bis Sp. z o.o.based in POLAND
This is a series of machines designed to work in the most difficult field conditions. Thanks to the single axle system with large “tractor” wheels, our manure spreaders are perfect for demanding area. The EVO SPREADER series has been designed for spreading manure, lime and chicken manure. The ...
-
Manufactured by Dutch Industriesbased in CANADA
Engineered For Any Size Operation. Our new BioSpreader PTX brings heavy-duty to the next level. While other manufacturers use mild steel flighting, the PTX is built with hardened steel to prevent sagging and deformity over extended use. Our live floor has a 3/4" grade 80 logging chain with a higher breaking strength. ...
-
Manufactured by Ursus S.A.based in POLAND
The N-218 and N-228 spreaders are intended to spreading manure, peat and compost. After removing the adapter and installing the rear side they can also be used to transport agricultural produce. They cooperate with tractors equipped with lower transport hitch. They are produced in version with horizontal two-drum adapter. The N-218 ...
-
Manufactured by Ursus S.A.based in POLAND
The N-218 and N-228 spreaders are intended to spreading manure, peat and compost. After removing the adapter and installing the rear side they can also be used to transport agricultural produce. They cooperate with tractors equipped with lower transport hitch. They are produced in version with horizontal two-drum adapter. The N-218 ...
-
Manufactured by Art`s Way Manufacturing Co., Incbased in USA
Rotating at 420 rpm, the vertical beaters of the V180 spreader distribute manure evenly and consistently over the field. The large 18 ft. box holds 468 cubic ft. of material. The pull type V Series can be converted to a truck mounted spreader with installation kit. The beaters are removable for stock piling and other material handling. ...
-
Manufactured by B. Strautmann & Söhne GmbH u. Co. KGbased in GERMANY
The outstanding feature of the Strautmann spreaders is their perfection down to the last detail. Due to decades of experience in manufacturing spreaders and high quality awareness, the Strautmann spreaders are among the best in their ...
-
Manufactured by Jeantilbased in FRANCE
Economical manure spreaders with a capacity of 10 to 15 m³: the models EVR 10-6, 12-8, 13-10 and 15-12 have a narrow body with 1.20m high sides. They enable a wide spreading and are ...
-
Manufactured by Roto-Mixbased in USA
Model Fp2-20 Fp2 EzSpred Spreader is a truck-mounted manure spreader with a modular shell design that offers versatility in attachment selection and is designed for commercial operators requiring minimum downtime. It has a capacity of 580 cu. ft. During operation, material is moved by two sets of heavy-duty 88C floor chain. This ...
-
Manufactured by Perardbased in FRANCE
Optium K series manure spreaders are fitted with double spiral distributor rotors with a diameter of 750 mm. This unique and patented system achieves a very large working width and exceptional fineness. Therefore, the distribution rotors can spread all types of manure: cattle, droppings, compost, sugar beet lime, etc. They are designed for ...
-
Manufactured by Perardbased in FRANCE
Optium L series manure spreaders are fitted with double spiral distributor rotors with a diameter of 860 mm. This unique and patented system achieves a very large working width and exceptional fineness. Therefore, the distribution rotors can spread all types of manure: cattle, droppings, compost, sugar beet lime, etc. They are designed for ...
-
Manufactured by Kirby Manufacturing Inc.based in USA
Standard Features: Four Heavy Duty Conveyor Chains. Heavy Duty 2 - 7/16 Floor Shaft. Heavy Duty Hydraulic Power System. Dual Heavy Duty 4” Pipe Horizontal Beaters. Reinforced Slop Gate. Tilt-Out Rear Beater Assembly (Removable). Complete Safety Guarding. Mechanical Drive Protection Devices. Heavy Duty Fender Skirts. ...
-
Manufactured by B. Strautmann & Söhne GmbH u. Co. KGbased in GERMANY
The MS spreader series represents the advanced development of the proven BE spreader models. With the all-steel trough now being powder-coated, the MS spreader models are a perfect complement to the Strautmann spreader portfolio. Solid spreading units with a high level of distribution accuracy ensure great operational safety and ...
-
Manufactured by Kelly Ryan Equipment Companybased in USA
High-speed beater drum with hardened-steel bolt-on replacement ...
-
Manufactured by Bertuola s.n.c.based in ITALY
System 2R has homogeneous distribution until 15/18 meters. 1-2-3-4 axles, 2 or 4 beaters vertical or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you