Manure Treatment Equipment In USA
-
Manufactured by Aquron Corporationbased in USA
AQURON Dairy-Solve™ combined in a microorganism culture will eliminate odor problems and enhance the degradation of solids, cleaning up manure lagoons, and disposing of standing liquids (water & waste) thus ending frequent lagoon clean-outs. Noxious odors disappear or rapidly improve upon application, working to eliminate the ...
-
Manufactured by BiOWiSH Technologiesbased in USA
BiOWiSH-Avian is a 100% natural feed additive that rapidly removes noxious odors from poultry waste post-excretion, significantly improving the productivity of livestock, the efficiency of waste treatment systems and overall air ...
-
Manufactured by BiOWiSH Technologiesbased in USA
BiOWiSH-Swine is a 100% natural feed additive that rapidly removes noxious odors from swine waste post-excretion, significantly improving the productivity of livestock, the efficiency of waste treatment systems and overall air ...
-
Manufactured by BiOWiSH Technologiesbased in USA
BiOWiSH Manure and Odor Treatment (Swine & Poultry) rapidly removes excess ammonia and noxious odors at their sources. Ideal for Poultry and Swine Operations, BiOWiSH Manure and Odor Treatment accelerates composting, promotes healthier bedding, reduces fly numbers and cuts sludge production in manure ...
-
Manufactured by BiOWiSH Technologiesbased in USA
BiOWiSH Manure and Odor Treatment (Beef & Dairy) was specifically developed to digest sludge, manage nutrient loading and reduce odor from manure lagoons. This product is particularly effective for wastewater or effluent streams with high cellulose or fiber content as produced on dairy farm effluent and beef feedlot ...
-
Manufactured by Officine Facco & C. Spabased in ITALY
The MDS system has been designed to dry the manure produced in poultry installations by using the ventilation system of the installations themselves, which, if necessary, is integrated with independent fans. The MDS system can be installed alongside a shed predisposed for this aim or an already existing one, placed very close to the ...
-
Manufactured by Officine Facco & C. Spabased in ITALY
The KAS system for manure drying in cages 'ECO' type has been conceived to dry the manure onto the manure belts: the air mixed between inside and outside is sent to the aeration ducts placed between or under the cage floors. The KAS machine allows to both dry the manure while contributing to the shed's internal conditions in low ...
-
Manufactured by Direct Biologicals, Incbased in USA
N-tercept is a new Direct Fed Microbial feed additive that combines three technologies proven to promote animal health and improve the environment in and around animal production facilities. N-tercept is unique in the fact that it has been designed to provide manure treatment liquefication, while preventing protein decomposition and ...
-
Manufactured by Penergetic Canadabased in CANADA
or slurry. Penergetic g is an economical, easy to apply manure treatment method (requiring no capital equipment) used by thousands of dairy farms in Europe (and around the ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
From waste product to recyclable material: Liquid manure can be processed efficiently and cost-effectively with the MoRoPlant20 mobile container solution. The heart of the plant is the decanter from Flottweg. This enables farmers to achieve particularly high separation efficiencies for phosphate and nitrogen. Livestock farmers, ...
-
Manufactured by Alasobased in USA
The 24" system offer dependable and efficient manure removal process. Available with elevation and de-elevation of up to 30°. They can be mounted down the center, side walls and by the ceiling. This system is used in storage areas attached to the layer house, or in a separate barn. Set up to meet your ...
-
Manufactured by Frans Vervaet B.V.based in NETHERLANDS
Would you like to use sweep hoses with accurate dispensing, no pressure drop but with a cutting device? And are capacity and low ground pressure important to you? Then opt for the Hydro Trike – Umbilical version and a 6 m3 buffer tank. In combination with the manure pump, the buffer tank ensures absolutely precise dispensing, ...
-
Manufactured by SmithCo, Inc.based in USA
SmithCo’s Super High Volume tub was designed for wet, low density payloads such as sludge, wet distillers, high moisture manure, processing waste, and pumice. This tub has the largest water-level tub capacity in the SmithCo product line. The SHV tub dumps only to one side, and is available in all SX Series axle ...
-
Manufactured by Frans Vervaet B.V.based in NETHERLANDS
Extra extendable axle: more power, more output. Because of the on-going increase of scale and therefor the desire for more capacity, we developed the Hydro Trike XL. The tank of this version has a capacity of 20,5 m³, which is also ideal to empty a 36 m³ truck in 2 times. The otherwise optional Borger 1550 (9m³) pump is standard on the XL Trike. Of course only 3 wheels was no ...
-
Manufactured by Press Technology & Mfg., Inc.based in USA
Press Technology’s Model E Manure Separator is designed for manure slurry separation and priced for the mid-sized producers, but it performs like a high end press. TheModel E address four major issues involved with manure management and the mid-size producer: Economics, Easy installation, Efficiency and Environment. The Model Ecan be ...
-
Manufactured by ClearSpan Fabric Structures, Inc.based in USA
Streamline any beef operation with this building that provides supreme protection and comfort to cattle, while also featuring plenty of ...
-
Manufactured by Frans Vervaet B.V.based in NETHERLANDS
Vervaet is a family business that started in 1974 by building self-propelled beet harvesters. The first Hydro Trikes were developed in 1989. Currently, more than 180 people work for Vervaet, making sure that clients from all over the world get their Q616, Q621 and their Beet Eaters 625 and 925 on time. The production of these machines takes place between February and September while the rest of ...
-
Manufactured by Press Technology & Mfg., Inc.based in USA
Manure Pro is an in-vessel pasteurization of dry manure solids (DMS) for the elimination and reduction of unwanted pathogens, weed seeds, and odors. Pasteurization takes place through the self generating heat within the vessel when the correct ratios of carbon, nitrogen, oxygen, and moisture are ...
-
Manufactured by ARCTECH, Inc.based in USA
3PM is an “outside the box”, innovative process That simultaneously de-odorizes, and macerates Particulates, and completely converts animal wastes (e.g., chicken manure) into humic rich fertilizer. The Use of coal derived a-HAX humic acid in this Process is the unique innovation that sets 3PM™ Apart from any other ...
-
Manufactured by Big Dutchmanbased in GERMANY
Using manure belts in poultry houses reduces ammonia emissions and thus contributes to an improved climate in the house and to the birds’ health. Intervals between manure removals should therefore be as short as possible. In the past, however, manure belts had to be constantly monitored during operation, sometimes requiring ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you