Only show results available in Virginia? Ok

minimum soil cultivating Equipment

  • TAIFUN - 2.50 m - 7.00 m Universal Fine Cultivator

    For effective operation on small or large areas, the Einböck universal fine cultivator TAIFUN is a multi-purpose, all-round machine. The TAIFUN is a classic machine for seed bed preparation due to its high and spacious frame construction - especially for areas with winter greening. The working-in of liquid manure and stable dung as well as ...

    By Einböck GmbH & CoKG based in Dorf an der Pram, AUSTRIA. from Minimum Tillage Product line

  • Dondi - Model MAXI - Combined Cultivators

    Following long-standing experience next to its users, Dondi presents a machine that meets all the needs associated with conservative tillage. The machine has been designed with a modular structure featuring three separate sections: the core is the cultivator with three rows of teeth that performs an optimal mixing of the soil with harvest ...

    By Dondi S.p.A. based in Ospedalicchio di Bastia Umbra, ITALY. from Cultivators and Minimum Tillage Product line

  • HURRICANE - 2.60 m - 4.60 m Universal Cultivators

    The Hurricane is suitable for shallow stubble cultivation directly after harvesting and threshing, for deep soil cultivation to break dense soil horizons, for intense preparation of seedbeds and for mixing and spreading of fertilizer and harvest residues (organic mass). No matter if followed by a convential soil tillage with a plow or a ...

    By Einböck GmbH & CoKG based in Dorf an der Pram, AUSTRIA. from Minimum Tillage Product line

  • TWISTER - 2.50 m - 8.00 m Short Disc Harrow

    Already the pre-crop harvest paves the way for a successful subsequent tillage. The turning of stubble after harvest should utilize the left-over humidity of the soil and therefore provide the seed advancement of weed seeds and lost crop. No matter if conventional soil cultivation is done with a harrow or non-turning operation.

    By Einböck GmbH & CoKG based in Dorf an der Pram, AUSTRIA. from Minimum Tillage Product line

  • Dondi - Model BIG - Combined Cultivators

    Equipment used for multiple applications at medium depth (25-35 cm) thanks to multi-ballast cultivators combined with front disc sections and various rear finishing accessories. This kind of system allows  to cut and make residues penetrate into the soil with the front disc section, which can operate at a depth of 10-15 cm;

    By Dondi S.p.A. based in Ospedalicchio di Bastia Umbra, ITALY. from Cultivators and Minimum Tillage Product line

  • Disk Sections for Combined Equipment

    Equipment suitable to be applied at the front of any kind of cultivator to create a combined machine with several applications and till the soil at a depth of about  10-15 cm. Plus, if necessary, if prevents tillage residues from building up. The disc elements are mounted on sturdy supports with bearings fitting with conical rollers and have ...

    By Dondi S.p.A. based in Ospedalicchio di Bastia Umbra, ITALY. from Cultivators and Minimum Tillage Product line

  • Model CB - Cultivator

    The Miedema CB full field cultivator has been specially designed for use in combination with a Miedema CP or MS planter with ridging hood. This enables you to combine planting bed preparation, planting and ridging in a single step. You save time, money and man hours, and get a better yield.

    By Dewulf based in Roeselare, BELGIUM. from Soil Cultivation Product line

  • ZIBO - Mechanical Tyre Pressure Roller

    The ZIBO hydraulic drive-assist nose wheel was developed to press fields and grassland evenly. The aim is to have the tractor cause minimum load and tracks on the land. The turning circle is minimal. The drive-assist nose wheel can be easily fitted to every tractor with dual-acting front lift (cat.2 ). The hydraulic system needs to be connected to ...

    By Zinger Mechanisatie B.V. based in Borger, NETHERLANDS. from Soil Cultivation Product line

  • Model PR - Folding Cultivator

    The farmer cultivator model PR 4000 is a folding machine ideal for minimum tillage and consists of 3 rows of elastic-type rippers, double discs, rear roller and pneumatic seed drill. The discs are adjustable, divided into 3 sections that not only fold over but also make the machine provide a better match to the ground by an elastic type . The ...

    By Valentini Antonio Srl based in Camposampiero (PD), ITALY. from Cultivators Product line

  • Model COMBI-V - Cultivator

    Cultivator suitable for the cultivation of vineyard with very hard soil. Particolar Features : The front and external tines are bent and they allow to work the entire width of the row of the vineyard. The small and versatile frame is designed to have the minimum width so it can pass between the supporting posts of the vineyard and it can pass ...

    By Di Raimondo s.r.l. based in Modica (RG), ITALY. from Vineyard Cultivators Product line

  • DISCAERATOR - Model 3000 - Cultivation

    3.0m working width.Three-point linkage-mounting.World-famous low-draught leg design.Choice of leg configurations.Hydraulic breakback leg option.Choice of rear rollers.Relieves soil compaction.Enhanced cultivation.

    By Alexander Mills based in Co Tyrone, IRELAND.

  • McConnel - Model DISCAERATOR 3000 - Cultivation

    3.0m working width. Three-point linkage-mounting. World-famous low-draught leg design. Choice of leg configurations. Hydraulic breakback leg option. Choice of rear rollers. Relieves soil compaction. Enhanced cultivation.

    By Ben Burgess & Co. Ltd. based in Norwich, Norfolk, UNITED KINGDOM.

  • SWIFTER - Model SN - Mounted Seedbed Cultivator

    SWIFTER SN is a mounted seedbed cultivator which manages to combine all working operations in a single pass, needed to prepare a perfect seedbed even in a rough furrow. The machine can be used in traditional systems of farming as well as minimum tillage systems. The design enables an easy exchange of the internal frame with shares for a ...

    By BEDNAR FMT s.r.o. based in Prague 9, CZECH REPUBLIC. from Seedbed Cultivator Product line

  • Fantom - Model NS - Share Cultivator

    Due to its design, the Fantom NS cultivator is very versatile and can be used for stubble breaking, pre-sowing soil processing or incorporation of manure. Machine‘s low weight decreases by loading of the rear parts of tractors during transport. Thanks to its simple and massive design, the Fantom cultivator offers an optimal compromise ...

    By Farmet a. s. based in Ceska Skalice, CZECH REPUBLIC. from Share Cultivators Product line

  • Aragon - Stubble Cultivator

    It has a large usage alternatives on soil processing especially for seed bed preperation and stubble processing. It decreased the product costs by its combined design.Requested soil processing quality can be reached if it is worked until 15km/h according to soil conditions.The high working capasity brings low costs and low fuel. 510mm notched ...

    By ILGI Agricultural Machinery based in Söke, TURKEY. from Disc Harrow Product line

  • Model RT300 - Cultivator Rota Tiller

    Grimme Rota Tilla 300 cultivator. Cultivation for potatoes is not easy on heavy lands. Traditional cultivators do not crumble the soil fine enough and multiple journeys across the field compact the soil. With the RT 300 many tines crumble the soil with a minimum of ground pressure.For front attachment the machine is kept with a large roller on the ...

    By Grimme Skandinavien A/S based in Rødkærsbro, DENMARK. from Potato Systems/Cultivation Product line

  • ENOKRUNKEN - Disc Cultivator

    Enokrunken is a disc machine designed for surface working of the seedbed (up to 18 cm.). The discs are placed in two rows at opposite directions; the wide spacing’s of 250 mm minimizes any possible ground or crop residues clogging. Every disc has a independent hub with an SKF oil bath sealed bearing, which guarantees maximum strength and the ...

    By Enorossi based in Calzolaro di Umbertide, ITALY. from Farm Product line

  • Landoll - Model 2000 Series - Row Crop Cultivator

    The Landoll 2000 Series Row Crop Cultivator is designed as a high speed, heavy residue cultivator used primarily as a weed control/soil aeration tool.  The 2000 Series fits into a multitude of row crop cultivation operations including ridge-till (with proper options), minimum till and no-till.  The 2000 Series is engineered with a close ...

    By Landoll Corporation based in Marysville, KANSAS (USA). from Farm Equipment - Landoll Farm Equipment Product line

  • Landoll - Model 2000 Series - Row Crop Cultivator

    The Landoll 2000 Series Row Crop Cultivator is designed as a high speed, heavy residue cultivator used primarily as a weed control/soil aeration tool.  The 2000 Series fits into a multitude of row crop cultivation operations including ridge-till (with proper options), minimum till and no-till.  The 2000 Series is engineered with a close ...

    By Castongia`s, Inc. based in Rensselaer, INDIANA (USA).

  • Befco - Model GRT 250 - Overseeder-aerator & seeder-cultivator

    The Green-Rite is a one pass tool which aerates, seeds (or fertilizes), levels and compacts the soil to improve seed germination. It is easy to use and performs several simultaneous operations allowing you to save time and fuel costs, while offering superb results. The machine is equipped with an aerator rotor powered by the tractor PTO; its ...

    By Cherry Valley Tractor Sales based in Marlton, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you