Only show results in Virginia? Ok

minimum tillage equipment

  • Vertical Tillage Coulter

    Exclusive offset design - Covers acres quickly - Superior residue management - Helps break down soil compaction layer - Offset discs allow for easier penetration and help prevent slabbing. 18' discs 7' apart available in 8 wave or 13 wave - Converts almost any tillage tool or heavy cultivator with C-shanks and a  minimum of 440 lb trips ...

    By GroundUp Ag based in Mayville, NORTH DAKOTA (USA).

  • Model 9700 CTS - Multi-Purpose Primary Tillage

    The 9700 CTS is designed to reduce equipment capital and operating costs by performing so many operations with this one machine. Salford's unique design allows you to use the CTS for top soil tillage, minimum tillage, deep tillage finishing or deep ripping, to reduce your capital costs and maintenance. The 9700 can be configured with chisel shanks ...

    By Multi-Purpose Primary Tillage based in Upper Sandusky, OHIO (USA).

  • Salford - Model 9700 CTS - Multi-Purpose Primary Tillage

    The 9700 CTS is designed to reduce equipment capital and operating costs by performing so many operations with this one machine. Salford's unique design allows you to use the CTS for top soil tillage, minimum tillage, deep tillage finishing or deep ripping, to reduce your capital costs and maintenance. The 9700 can be configured with chisel shanks ...

    By Salford Group, Inc. based in Osceola, IOWA (USA). from Multi-Purpose Primary Tillage Product line

  • Genesis SABR - Model Lit - Single Disk High Speed Minimum Disturbance Opener

    Each row has 20' of vertical, independent working range. Sold individually or on complete applicators.

    By AgSynergy, LLC. based in Seneca, KANSAS (USA).

  • Model SDA FLEX - No Till Seed Drill Articulation

    Performs the tillage, minimum tillage or conventional sowing of wheat, oats, barley, rye, rice and other irrigated or rainfed fine grains; distinguished by its high strength, more uniform distribution of fertilizers and seeds and greater wheel articulation driving.

    By Marchesan S/A based in MATÃO, BRAZIL.

  • Bio Range SUPASOAK

    Contains non-ionic surfactant and naturals bio-degradants which can help improve water penetration in hard to wet soils during minimum tillage sowing.

    By Nutrian Liquid Fertiliser based in Perth, AUSTRALIA.

  • WILCOX - Model II - Heavy Duty Performer

    The Wilcox Heavy Duty Performer and Performer II - a maximum versatility, multifunctional ground driven mulcher (no PTO required) with both minimum tillage and conservation tillage functionality. Combines conventional, multi-pass tillage and bed operations (listing, lay-by, pre-working beds, side dressing, etc.) into one or two pass completion at ...

    By WILCOX Agri-Products based in Walnut Grove, CALIFORNIA (USA).

  • Almaco - Model HDGD - Heavy-Duty Grain Drill

    Superior, heavy-built frame guarantees performance and durability in tough, minimum and no-till applications. 7' X 7' toolbar handles special tillage attachments or multiple cone seeders with ease.

    By Almaco based in Nevada, IOWA (USA). from Heavy-Duty Grain Drill Product line

  • Great Plains - Model SS1300 Series - Inline Sub-Soiler

    The Great Plains Inline Sub-Soiler is another step in the evolution of our vertical tillage family designed to eliminate yield-robbing compaction layers created by horizontal tillage tools such as plows, disks, and sweep implements.

    By Great Plains Manufacturing, Inc. based in Salina, KANSAS (USA). from Inline Sub-Soiler Product line

  • Model 740A and 750A - Drills

    Engineered for the toughest conditions and maximum area performance,the 740A pneumatic drill for minimum tillage and the all-round 750A pneumatic drill from John Deere impress with the highest precision standards. Conventional, minimum or no till – these high performance machines deliver outstanding advantages whatever the system.

    By Stephen Moore Farm Machinery based in Co Londonderry, NORTHERN IRELAND. from Drills Product line

  • Model 325 - Offset Discs

    This model is perfect for plowing down of heavy residues and primary tillage operations and light industrial applications.

    By Kello-Bilt based in Red Deer County, ALBERTA (CANADA). from Offset Discs Product line

  • Scaribars

    Horwood Bagshaw Australian designed and built Scaribars can be used as: a robust primary tillage implement a secondary tillage implement a chisel plough an accurate direct drilling seeder a minimum tillage seeder a conventional seeder a high clearance trash seeder Low maintenance Scaribars are: tough, strong and reliable made in Australia to suit ...

    By Horwood Bagshaw based in Mannum, AUSTRALIA.

  • Sundance - Model 4,779,684 - Modified Disk

    Disk, rip, and list all in the pass. Exceptoinal incorporation of crop debris. Lends itself to the minimum-tillage strategy. Maintains integrity of row, regardless of number of trips. Available in 2-through 8-row models. 3-point linkage mounted (3-point category II or III).

    By Arizona Drip Systems, Inc. based in Coolidge, ARIZONA (USA).

  • Sundance - Model 4,779,684 - Puller

    Pulls or cuts the roots. Effective in killing the plant – cotton, corn, tomatoes, melons, etc. High-speed operation – low horsepower (6-rowl 100 h.p., 8-10 m.p.h.). Available in 2 – through 12-row and larger. Advantageous in Minimum-tillage practices.

    By Arizona Drip Systems, Inc. based in Coolidge, ARIZONA (USA).

  • Quatro - Cultivators

    Innovative concepts, unparalleled build quality and versatility – all are key features of the all-British designed and built Sumo Quatro, a class leading, one-pass, minimum tillage cultivator that incorporates many original ideas such as a level drawbar, twin-mounted discs, auto-retractable legs and the patented Multipacka.

    By Sumo UK Ltd based in York, UNITED KINGDOM. from Cultivators Product line

  • Haybuster - Model 77C - Seed Drill

    Built for versatility, Haybuster’s 77C (7 feet) and 107C (10 feet) All Purpose drills can be used in no till, minimum till, conventional tillage, reclamation and for pasture rennovation. They are drills for all purposes in a convenient easy to use package. Now with heavy-duty cast linkages for even more durability.

    By DuraTech Industries International, Inc. based in Jamestown, NORTH DAKOTA (USA). from Seed Drill Product line

  • Haybuster - Model 107C - Seed Drill

    Built for versatility, Haybuster’s 77C (7 feet) and 107C (10 feet) All Purpose drills can be used in no till, minimum till, conventional tillage, reclamation and for pasture rennovation. They are drills for all purposes in a convenient easy to use package. Now with heavy-duty cast linkages for even more durability.

    By DuraTech Industries International, Inc. based in Jamestown, NORTH DAKOTA (USA). from Seed Drill Product line

  • Leone - V Shaped Trailed Disc Harrow

    'V' disc harrows from 5 to 9 meters. Very sturdy machine, ideal for working on stubble and minimum tillage, especially where you will need a greater depth of working, in fact this has dischiera standard discs both front and rear limbs mended by 810x10mm. Central frame with opening and closing hydraulic and power wheels.

    By Maschio Gaspardo S.P.A. based in Campodarsego (PD), ITALY. from V Shaped Trailed Disc Harrow Product line

  • Cultiline - Model HR.14 - Power Harrows

    With 4 rotors per metre, compared with harrows equipped with fewer rotors, SULKY obtains a better soil mix and a superior crumbling effect even at the same rotor rpm. SULKY harrows make better use of the PTO power, which can be seen by reduced fuel consumption or, with minimum tillage techniques, by better forward speeds.

    By Sulky Burel based in CHATEAUBOURG, FRANCE. from Power Harrows Product line

  • Chisel Chopper

    Our rugged four-bar frame is constructed with 4'x6' steel tubing. This design offers better placement of the shank for more trash clearance. The Calkins Chisel Chopper can save time, fuel and money. Use our Chisel Chopper as a minimum tillage tool in preparing your seed beds for big yields. For primary conservation tillage, the Chisel Chopper ...

    By J.E. Love Company based in Garfield, WASHINGTON (USA). from Chisel Chopper Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you