Mulcher Equipment Near Italy
-
Manufactured by FACMA s.r.l.based in ITALY
to prepare the ground, working it different times by mulcher (grass cutting) during the previous year and before the produce falls to the ...
-
Manufactured by FACMA s.r.l.based in ITALY
The inter-row disk is an accessory which can be mounted on the mulcher Facma, ideal for the infesting grass cutting in the inter-rows and around the trees trunks. It works carefully and with extreme agility, without damaging the bark. It can be used for all arboreal cultivations and it permits to avoid the use of chemical products. It is ...
-
Manufactured by LIPA SRLbased in ITALY
The TLB-F hydraulic mulcher for skid-steer loaders is a robust and heavy machinery for grass, reeds and bushes shattering up to 3~A cm of diameter. Is applicable on skid-steer loaders with at least 30 Hp power (22 ...
-
Manufactured by FACMA s.r.l.based in ITALY
The new mechanical pick-up RM is an accessory applicable to the aspiration self-propelled harvesters Cimina. The use of this device permits a series of advantages as: 1) significant suppression of the airborne dust; 2) higher harvesting speed in comparison to the use of the traditional harvester, constituted by rubber rotating brushes; 3) better harvesting performance in grass presence; 4) better ...
-
Manufactured by Bandit Industries Inc.based in USA
There isn’t another clearing machine on the market with the power and performance to match the Bandit Model 5000T. This incredible track carrier wields a 108-inch wide bandit-designed forestry mulcher attachment, backed with a 540-horsepower diesel engine to quickly mow and mulch large trees. It rides on a proven CAT® 325EL ...
-
Manufactured by FACMA s.r.l.based in ITALY
The Trailed Harvesters are suitable for the picking from the ground of: hazelnuts, chestnuts, almonds, walnuts, coffee, macadamia, pecan walnuts and olives. The Trailed Harvesters born by this times in the far ’70s years, are the first machines created by FACMA and still now they are considered an important part in the annual production. Their success is due to their versatility in ...
-
Manufactured by FACMA s.r.l.based in ITALY
The FX model is suitable for grassy mantles, runners and stones until 6 – 7 cm of diameter. It is a mulcher with fixed hitch, to be mounted on the three points of the rear hydraulic lift of tractors, with a power from 18 HP to 85 ...
-
Manufactured by LIPA SRLbased in ITALY
The TLB-FF hydraulic forest mulcher for skid-steer loaders is a robust and heavy machinery for brushes, branches, lantana and bushes, shattering up to 7^8 cm of ...
-
Manufactured by FACMA s.r.l.based in ITALY
The BPEL model is advised for mulching grassy mantles, runners and stones until 6 – 7 cm of diameter in orchards. The high rotation speed of the hammers permits to obtain an optimal grass and branches chopping. The hitch is available with manual or hydraulic side shift. Powered by tractors from 25 HP to 100 HP. BPEL/RV: the BPEL model can be built, on request, on the reversible version, to ...
-
Manufactured by FACMA s.r.l.based in ITALY
The Trailed Harvesters are suitable for the picking from the ground of: hazelnuts, chestnuts, almonds, walnuts, coffee, macadamia and olives. These machines constitute the fruit of development, knowledge and technologies, and they represent the FACMA reply to the mechanized harvesting of the ...
-
Manufactured by GF Costruzioni Macchine Agricole Srlbased in ITALY
The TSP shredder is suitable for medium and high power tractors from 45 horsepower onwards. The TSP is suitable for the shredding of orchards even in the presence of branches of 7-8 cm and is also well suited to open field cultures. Thanks to the presence of many hammer blades on the rotor, it manages to chop the grass and leave no hay residues in the ground. The application of the front wheels ...
-
Manufactured by Fedele Mariobased in ITALY
Combined Aiuolatrice-mulcher for aiuolatura of the soil and laying and tamping of plastic or paper film in a single pass. It can work even aiuolatrice and only mulch ...
-
Manufactured by Fedele Mariobased in ITALY
Mulcher "FEDELE THOMAS" for laying and tamping of plastic or paper films, even in soils aiuolati or raised beds. It stands out thanks to the four rotating concave disks that allow it to perform an excellent job of strong opening of the groove and tamping of the film with minimum effort and greater resistance to wear by exploiting to the ...
-
Distributed by Claudio Vignoli Groupbased in ITALY
A wide and articulate range of mulchers, planning and building models that offer excellent solutions for: ground preparation to the mechanized harvesting of fruits, check of infesting weeds, cutting up of runners and pruning and stones crushing up to 20 cm of ...
-
Manufactured by Cormidi S.r.l.based in ITALY
The Cormidi 85 Series hydrostatic minidumper is a machine that is configurable to facilitate the work of construction companies. It was designed, developed and manufactured entirely in Italy at Cormidi SRL, and represents the minitransporter of excellence. It can best be configured with the original accessories. ATTRACTIVE DESIGN At the company it exudes an air of innovation, vision, all the ...
-
Manufactured by Checchi e Magli Srlbased in ITALY
The main features of the PS14 INOX PLUS mulcher are its front stainless steel roller, a double roller reel winder, adjustable 2-direction film pressing wheels to lay also on raised transplantation beds and film width up to 140 cm. The increasing success of mulching film in farming has been dictated by a series of agronomic and agricultural ...
-
Manufactured by Checchi e Magli Srlbased in ITALY
Numerous tests have demonstrated that the presence of mulching film reduces water evaporation, diminishing the consumption and increasing the efficiency by using ...
-
Manufactured by Checchi e Magli Srlbased in ITALY
The main features of the PS19 INOX PLUS mulcher are its front stainless steel roller, a double roller reel winder, adjustable 2-direction film pressing wheels to lay also on raised transplantation beds and film width up to 190 cm. The increasing success of mulching film in farming has been dictated by a series of agronomic and agricultural ...
-
Manufactured by Nobili S.p.A.based in ITALY
Multi-purpose mulchers with interchangeable knives particularly suitable for crushing vine-shoots, kiwi-cuttings, grass and pruning residues. The mulchers VK 95 - 115 - 135 and 155 are provided with adjustable coupling and gearbox with overrunning clutch. Thanks to their low power requirement and compact size, these machines can be used also ...
-
Manufactured by Nobili S.p.A.based in ITALY
Nobili WS 320 BIO mulchers are tractor-mounted machines to be fitted to the front tractor three-point linkage or to the rear linkage in reverse drive tractors. Ideal to shred energy crops such as Arundo donax, Panicum virgatum, Miscanthus sinensis and fiber sorghum. WS BIO range is supported by a roller adjusting the working height and is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you