Nuts Harvesting equipment in USA

  • Model AWS3200 - Nut Harvester

    GK Machine’s AWS3200 Nut Harvester is one of the most versatile harvesters available. It’s designed to handle the wet harvest conditions of the Pacific Northwest, and its high volume suction fan and adjustable vacuum separator are designed for superior cleaning performance.

    By GK Machine, Inc. based in Donald, OREGON (USA). from Agricultural Equipment Product line

  • Weiss McNair - Model 9800 P.T.O. - Nut Harvester

    The Weiss McNair 9800 California Special nut harvester is designed to help California meet all government clean air and water regulations. The long intermediate dirt chain allows dirt to sift through the chain before the suction fan vacuums debris from the crop for less dust and a cleaner harvest. The vacuum system provides for faster, cleaner ...

    By Weiss McNair based in Chico, CALIFORNIA (USA). from Harvester Product line

  • Flory - Model 8770 - Self-Propelled Nut Harvester

    THE BEST GOT BETTER - NOW WITH MORE HORSEPOWER. Equipped with industry leading cleaning chains, variable speed suction fan and adjustable windboard to optimize for all crops and conditions. The FLORY 8770 builds on a proven history of highly maneuverable self-propelled harvesters designed to handle even the largest crops.

    By Flory Industries based in Salida, CALIFORNIA (USA). from Harvesters Product line

  • JackRabbit - Model 180 - JackRunner - The Original Nut Harvesting System

    The JackRunner is the original nut harvesting system that can travel in both directions up to 30 mph. For the fastest shuttle system from the reservoir cart to the elevator choose JackRabbit. Fast entry, fast exit, never crossing berms or running over irrigation.

    By JACKRABBIT INC. based in Ripon, CALIFORNIA (USA). from Nut Harvesting Equipment Product line

  • Model KCM612 - Fertilizer Spreaders

    Adjustable speed on main chain, bander chains and spinners. Extra heavy tubing frame plate floor and box. Special heavy duty drive sprockets. Axle is adjustable up and down. Rear feed door is adjustable from tractor. Custom heavy service dual hyraulic motor gear box on main drive chain. Units are available in standard and gable box configuration ...

    By Kingsburg Cultivator Inc. (KCI) based in Kingsburg, CALIFORNIA (USA). from Nut Harvesting Division Product line

  • JackRabbit - Stick Jack eliminates

    Remove sticks, reduce labor and increase harvester performance in a single pass with the use of only a 50 horse-power tractor. Jack Rabbit's Stick Jack eliminates the sticks from the windrow and with a flip of a swtch unloads the sticks out of the orchard. Sweeper brushes keep an even windrow to increase harvester productivity. Front gage wheels ...

    By JACKRABBIT INC. based in Ripon, CALIFORNIA (USA). from Nut Harvesting Equipment Product line

  • JackRabbit - Model 30-36 - High Speed Elevator

    The JackRunner or Jack Cart pulls along side of the 30/36 Elevator preparing to start the unloading process. Hydraulic jack control located at the hitch for quick hook up for towing and relocating elevator.

    By JACKRABBIT INC. based in Ripon, CALIFORNIA (USA). from Nut Harvesting Equipment Product line

  • KCI Scheidt - Model RD 8125 - Filed Cart

    The cart is loaded from front to rear using 2 adjustable augers driven by a removable hydraulic motor. The large 3 stage telescoping cylinder dumps the cart with ease and precision. The wide 26'x60' rear door allows for quick, clean operation.  The RD8125 can either drive over or back up to the conveyor. The 2 foot high pivot point allows it ...

    By Kingsburg Cultivator Inc. (KCI) based in Kingsburg, CALIFORNIA (USA). from Nut Harvesting Division Product line

  • KCI Scheidt - Drive Over Conveyor

    Bottom Hopper can be driven over by tractors and carts or trucks. 50 HP or larger 4 Cyl Deutz Diesel engine. 15 to 17' Discharge height. 24'-30' or 36' wide belt. Low profile 12' to 15' long recieving section. Belt returns on long wearing UHMW 1/2 rounds. 32 Gal Hyd & 22 Gal fuel tank. Belt speed is approx 850 FPM. Capacity is about 3 Ton/Min. ...

    By Kingsburg Cultivator Inc. (KCI) based in Kingsburg, CALIFORNIA (USA). from Nut Harvesting Division Product line

  • Model B0-816 - Low Profile Bank-Out Cart

    The revolutionary new design is the first of it's kind. It is both highly specialized and very versatile. It will fit easily into virtually any existing system, working pulled behind any harvester with stop to unload or unload on the fly using the new KCI System.

    By Kingsburg Cultivator Inc. (KCI) based in Kingsburg, CALIFORNIA (USA). from Nut Harvesting Division Product line

  • JackRabbit - Side Dump Shuttle Cart

    The JACK CART meets the Reservoir cart at the end of the row where the harvester operator initiates the product transfer into the JACK CART. No back breaking cart changes or wasted time, just a fast trip to the elevator with a large load of nuts! As the tractor driver approches the elevator he begins the unloading process of the JACK CART. ...

    By JACKRABBIT INC. based in Ripon, CALIFORNIA (USA). from Nut Harvesting Equipment Product line

  • JackRabbit - Model WEDGE 10 - High Speed Reservoir Cart

    The new WEDGE 10 High Speed Reservoir Cart’s unique bin design and dual chain system unloads product faster with less nut damage and plugging then other reservoir carts. The dual chain system removes more dirt and prolongs chain life. Side panels help eliminate spillage and increases load capacity without tree limb interference.

    By JACKRABBIT INC. based in Ripon, CALIFORNIA (USA). from Nut Harvesting Equipment Product line

  • Model 4024D - Field Conveyors

    40 HP Deutz diesel engine with a Donaldson dual clement air filter powers the wide 24' belt. The engine is protected by 'Tattle Tale' emergency shut down switches for low oil, high temperature or fan belt breakage.

    By Kingsburg Cultivator Inc. (KCI) based in Kingsburg, CALIFORNIA (USA). from Nut Harvesting Division Product line

  • Model DR Series - Huller

    Most of today's commercial hullers need to produce a high volume of hulled product per hour. To meet this demand, Wizard offers the DR series Rotary Hullers. With a high speed rotary brush, and three linear feet of knife surface the DR Series Rotary Hullers can maintain high production volumes throughout the harvest season.

    By Wizard Manufacturing, Inc based in Chico, CALIFORNIA (USA). from Nut Processing Product line

  • Best Harvest - Model BHT6071 - Silage, Hay and Crop Moisture Tester

    Easy-to-use Silage and Crop Moisture Tester Measures the Moisture Content of Silages, Balage, Hay, High-Moisture Grains, Total Mixed Rations, Wet Distiller's Grains, Wood Chips and Much More. Obtain reliable, consistent moisture content for silage and forages in under 30 minutes without charts or waiting on lab results. Use with High-Moisture Feed ...

    By Best Harvest based in Largo, FLORIDA (USA). from Best Harvest Silage, Hay & Crop Moisture Testers Product line

  • 36` Pull-Behind Pine Cone Picker

    Adding our Pull-Behind Almond Harvester to your equipment will help you maximize the time spent on harvesting, not to mention your nut yield.  Bag-A-Nut's Pull-Behind can be pulled behind an ATV, small tractor, or riding lawn mower.

    By Bag-A-Nut, LLC based in Jacksonville, FLORIDA (USA). from Beech Nut Product line

  • Chestnut Trees

    The chestnut is a prized source of food in many cultures, most likely due to its relatively high fiber content, vitamins, minerals, and its culinary versatility. Once peeled, harvested chestnuts can be eaten raw or deep fried, but they are commonly scored and roasted, which does not require peeling. Chestnut trees and their nuts are also ...

    By Stark Bro`s Nurseries & Orchards Co. based in Louisiana, MISSOURI (USA). from Nut Trees Product line

  • Almond Trees

    Almond trees are well-suited for most home growers because of their small, compact nature. The almond tree is a relative of the peach tree and the edible almond seed even develops inside a peach-like fruit or “hull” that is discarded after harvest. The fragrant blossoms of the almond tree are highly attractive to bees and other insects ...

    By Stark Bro`s Nurseries & Orchards Co. based in Louisiana, MISSOURI (USA). from Nut Trees Product line

  • Stab-A-Nut Large Acorn Harvester

    We engineered the Stab-A-Nut to pick up as effectively as our larger rolling harvesters, but at a more affordable price. This Stab-A-Nut was designed with the 'backyard' large acorn tree owners in mind. We recommend the Stab-A-Nut Large Acorn Harvester for harvesting one to two trees.

    By Bag-A-Nut, LLC based in Jacksonville, FLORIDA (USA). from Large Acorn Harvester Product line

  • Receiving Pit

    Everything has a beginning... Including the Wizard Greenline. After coming directly from the field, the nuts are dumped into our receiving pit, which stores the nuts before they are processed through the plant. Wizard Receiving Pits are built with durability and ease of maintenance as a top priority. A typical pit is constructed with heavy duty ...

    By Wizard Manufacturing, Inc based in Chico, CALIFORNIA (USA). from Nut Processing Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you