Refine by
Onion Topper Equipment & Supplies
20 equipment items found
Manufactured by:Htech cz s.r.o. based inOlomouc, CZECH REPUBLIC
Onion topper separates dried tails from the onion bulbs allowing easier handling and processing in latter stages of ...
Manufactured by:Eqraft based inEmmeloord, NETHERLANDS
The Onion Topper cuts the foliage and roots of onions and shallots in a clean and safe manner with rotating blades while also removing loose skins and ...
Manufactured by:Grimme Landmaschinenfabrik GmbH & Co. KG based inDamme, GERMANY
The onion topper VT 170 is used for an efficient haulm reduction and pre-harvest treatment before windrowing. The machine can be used for both front- and rear attachment. The rotating blade sets with their innovative geometry create a high suction effect, which sets up the haulm before it is cut off by the blades. The very sensitive height guidance of the ...
Manufactured by:PRO-VEGA Sp.J. based inŁowicz, POLAND
Fully-closed construction ensures maximum work safety. Sensor-protected, openable guards allow easy access to the main working elements. Waste-material conveyor located at the bottom. The rotation speed of the disc knives can be regulated with an ...
Manufactured by:Holaras | Hoopman Machines B.V. based inAalten, NETHERLANDS
When using the -holaras- topping machines, the haulm is not pulled off, but cut of by fast rotating blades. This avoids damage because the blades do not touch the onions. The number of directed vibrations transmitted by specially designed vibrator-motors on the vibration-sieves is such that the onions move in a floating motion over the vibrationnsieves. The haulm (tops) is drawn through the ...
Distributed by:Unifer International GmbH based inElmenhorst, GERMANY
OT-1500 Onion topper ensures efficient topping of onions before windrowing. OT-1500 is with 3-point linkage and is available as front- or rear mounted model. 3 sets of revolving knives raise the leaves, cut the top and blow it into the right wheel track. ...
Manufactured by:Top Air Incorporated based inParma, IDAHO (USA)
The Top Air Topper Windrower Series of harvesters continues to be a mainstay in the onion industry. The first step of the “Two Step” method of harvest, Topper Windrowers are very popular in areas where growers prefer to cure the onions in windrows after the tops are removed. Extremely high capacity, coupled with very ...
Manufactured by:Top Air Incorporated based inParma, IDAHO (USA)
The Top Air Topper Windrower Series of harvesters continues to be a mainstay in the onion industry. The first step of the “Two Step” method of harvest, Topper Windrowers are very popular in areas where growers prefer to cure the onions in windrows after the tops are removed. Extremely high capacity, coupled with very ...
Manufactured by:edp Australia pty ltd based inMooroopna, AUSTRALIA
Ideal for Undried Onions. Easily Replaceable Vibrating Screens. Quick Action Blade Maintenance. Very Gentle on the ...
Manufactured by:Simon Group based inLa Chapelle-Basse-Mer, FRANCE
Onion topper / stripper.. Unequalled intake capacity for a perfect cut. Four-wheel design for greater efficiency and stability. Belt drive for maximum ...
Manufactured by:Top Air Incorporated based inParma, IDAHO (USA)
The Top Air TL 4400 XT is the newest member of the topper loader series of onion harvesters. This model picks up, tops and loads four 40' to 44' beds of onions, resulting in extremely high field efficiency. Like all Top Air harvesters, simplicity, durability, low maintenance and high capacity are designed into the TL 4400 XT. ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The Samon 3-bed topper is designed to increase capacity so that more focus can be placed on the harvesting operation. The machine is equipped with three open toppers mounted in a folding frame. The topper comes standard with automatic depth control, ensuring accurate topping height. The topper is available in widths of 1.50, 1.80 and 2.00. The machine is equipped with a heavy-duty double bearing ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The closed topper is a good machine for processing a lot of (green) foliage. The topper has 3 or 4 rotating shafts each with 2 blades that are placed obliquely, one behind the other. The haulm is discharged to the right side due to the positioning of the blades. The specially shaped outlet ensures that the foliage is blown into the tractor’s ...
Manufactured by:Imac s.r.l based inBudrio, ITALY
Onion haulm topper supplied with hydraulically driven level wheels, cardan shaft with clutch and 3 points hitch 2ª cat. Working width from 150 to 180 ...
Manufactured by:Samon Machine / Ellens Landbouwtechniek BV based inNagele, NETHERLANDS
The open topper is designed so that it does not fill up with soil and foliage. The open topper is equipped with plates and seals all around. There are 3 or 4 rotating shafts with 2 blades each in the machine. The topper tops a full bed. The foliage that has been topped is shredded and thrown back into the ...
Manufactured by:Eqraft based inEmmeloord, NETHERLANDS
Features & Specifications: Pre-sizing is important as pre-treatment process for onion topping, especially with larger volumes, By separating smaller from bigger produce, the capacity per individual onion topper increases, Pre-sizing also increasing the quality of the topping process thanks to the option to use appropriate screen sizes, ...
Manufactured by:Eqraft based inEmmeloord, NETHERLANDS
Features & Specifications: Pre-sizing/cleaning is important as pre-treatment process for onion topping, especially with larger volumes, By separating the smaller produce from bigger produce, the capacity per individual onion topper increases, while also increasing the quality of the topping process thanks to the option to use appropriate ...
Manufactured by:Eqraft based inEmmeloord, NETHERLANDS
The Vibrating Pre-Cleaner quick and easy separates the undersized products, loose skin and soil from the produce in the pre-treatment ...
Manufactured by:Holaras | Hoopman Machines B.V. based inAalten, NETHERLANDS
The -holaras- haulm topper series is available in 3 models: UM 150, UM 180 and UM 210. Mechanical removal of haulms saves labour when topping and harvesting onions. Topping and harvesting in one pass has proven to be the most efficient approach. The stable and sturdy model UM 150 is suitable for 3-point linkage. All -holaras- onion haulm ...
Manufactured by:Lee Shuknecht & Sons, Inc based inElba, NEW YORK (USA)
At Lee Shuknecht & Sons, Inc., our custom onion harvesting equipment is still our original and most popular product line, but since 1974 we have evolved into a multi-faceted agricultural equipment manufacturer. Custom equipment is available for every step of the planting, harvesting, sorting, cleaning, and packaging process. These systems include onion ...