Only show results available in Virginia? Ok

opened milk cooling tank Equipment

  • Opened Milk Cooling Tanks for Small Dairies

    Direct expansion system with compressor installed on the unit. The lid can be opened. 1 or 3 electrical phase. Quick cooling. Automatic temperature control. Automatic agitator. Optional automatic controller. 50-3 400 liter

    By Agromilk Ltd. based in Székesfehérvár, HUNGARY. from Milking Equipment- Milk Cooling Systems Product line

  • Model U - Open Tank

    Available 2.000 liters milk cooling capacity. With two evaporators for maximum cooling efficiency and reliability. Inner and outer tanks are made of durable AISI 304 Stainless Steel. The lid is easy to open and has a filling hole of Ø 200 mm with inlet cover. Reliable operation, even in high ambient temperatures. Suitable for 2 and 4 ...

    By Mueller based in Assen, NETHERLANDS. from Milk Cooling Tanks Product line

  • Model R - Open Tanks

    Available from 500 to 1500 litres milk cooling capacity. Inner and outer tanks are made of durable AISI 304. The lid is easy to open and has a filling hole of Ø 200 mm with inlet cover. Simple operation, even in high ambient temperatures. Quick installation cooling tank with built-on condensing unit. Suitable for 2 and 4 milkings. Manual ...

    By Mueller based in Assen, NETHERLANDS. from Milk Cooling Tanks Product line

  • Fullwood - Model LEM/DX 18000 - 32000 - Milk Cooling Tank

    Horizontal tank with laser welded efficient evaporator. Constructed of stainless steel 18/10-AISI 304. Chassis with solid leg construction and adjustable feet (standard 2 % slope) >Flat manhole and swivelling cover with rubber seal detachable air vent. 2 milk inlet openings, 80 mm (1 in the manhole cover, 1 at the back). Tank outlet 0 80 mm, ...

    By Fullwood Ltd based in Ellesmere, UNITED KINGDOM. from Cooling Product line

  • Fullwood - Model REM/DX 1050 - 15000 - Milk Cooling Tank

    Horizontal tank with laser welded efficient evaporator. Constructed of stainless steel 18/10 — AISI 304. Chassis with solid leg construction and adjustable feet (standard 2 % slope). Flat manhole and swivelling cover with rubber seal detachable air vent. 2 milk inlet openings, 80 mm (1 in the manhole cover, 1 at the back). REM/DX 2100 and ...

    By Fullwood Ltd based in Ellesmere, UNITED KINGDOM. from Cooling Product line

  • Model DF95L - Milk Cooling Tanks

    The DF95L is available in several different sizes and is our largest model of milk cooling tank. Just like the DF95 and DF953, it can be adapted to suit the desired location of the connections and equipment. For robot milking, the DF95L can be supplied with either an integrated cooling unit or a separate one which may be placed wherever ...

    By Wedholms AB based in Nyköping, SWEDEN. from Milk Cooling Tanks Product line

  • Model DFOV/DFOH - Milk Cooling Tanks

    Our standard models of milk cooling tanks, DFOV and DFOH, are available in several sizes and are very easy to operate. They take up very little floor space and rest on longitudinal supports with legs, making them easy to transport. They are entirely constructed of stainless steel and recyclable material. The lid can be opened in one piece and has ...

    By Wedholms AB based in Nyköping, SWEDEN. from Milk Cooling Tanks Product line

  • Model DF95/953 - Milk Cooling Tanks

    Tanks of this type are available in several sizes and dimensions. Depending on your requirements, they can be adapted to suit the location of your local connections and equipment. The DF953 is a complete tank, incorporating a cooling unit and control equipment ready for use. The DF95 is supplied with a separate cooling unit, which may be placed at ...

    By Wedholms AB based in Nyköping, SWEDEN. from Milk Cooling Tanks Product line

  • Manuel Milk Cooling Tanks

    Kromel Cooling Tanks ; Milking refrigating time from 35°C to 4°C under 3 hours. Cooling performance Class2/A/II. Special calibrated manuel scale with 3-4 % sensitive rate1.walled 2mm and 1 mm walled accuplated Ep type heat transfer plate. Isolated walled from AISI 304 S.S.

    By Kromel Makine Sanayi A.S. based in Hanlı / Arifiye / Sakar, TURKEY. from Milk Elimination Product line

  • Milk Taxi - Bucket Feeding System

    You are expected at a meeting every morning, every evening... by your calves! It may be the most critical meeting you attend on your farm, as it is the one where you lay the foundations for the future success of your business. Are you one of those who are really busy during calf feeding hours because milking and feeding the cows, too, require your ...

    By Holm & Laue GmbH & Co. KG based in Westerrönfeld, GERMANY. from Calf Feeding Product line

  • Alima-Bis - Milk Cooling Systems

    Open round cooling tanks of the capacity from 100 to 1200 liters. Open bath type cooling tanks of the capacity from 600 to 2000 liters. Closed cooling tanks of the capacity from 1200 to 30000 liters. Heat recovery systems from the cooling agent of the capacity from 100 to 1200 liters. Heat recovery systems from the milk (plate coolers).

    By A-Lima-Bis Ltd. based in Środa Wielkopolska, POLAND. from Technique of Husbandry Product line

  • Astrea - Milking Robot

    ASTREA 20.20 is in a class of its own, thanks to its robust construction in combination with the use of durable materials, such as easy-to-clean stainless steel. The robotic arm is without a doubt the most reliable product of its kind on the market. The advanced and modern technology constitutes a sound basis the dairy farmer can fully rely on. In ...

    By Pearson International LLC based in Co. Kildare,, IRELAND. from Robotic Milking Product line

  • Model SV 2.0 - Vertical Milk Cooler

    Direct expansion vertical milk cooler. Capacity: 10,000 to 40,000 litres. Performance: 4, and 6 milkings. Inner tank: manufactured in AISI 304 stainless steel and compliant with the most stringent food-processing requirements. Lacquered aluminium panel exterior. Automatic wash in both clockwise and anticlockwise direction. Compliant with standards ...

    By Serap Group based in Gorron, FRANCE. from Vertical Milk Cooler Product line

  • Model MOTECH6 - Mobile Milking Parlour

    The advantages of the MOTECH mobile  tandem milking parlour at a glance: Milking process is done in the pasture. Easily connects to the mobile milk (cooling optional)  tank. Semi automatic washing devices   Gate control from the inside from each milking place Stable and durable construction Excellent price/service ratio 6 milking ...

    By Mototecha JSC based in Lithuania, AFGHANISTAN.

  • Galaxy Astrea - Model 20.20 AMS - Automatic Milk System

    For many years, after successful application in industry, the new ASTREA 20.20 concept is now proving its clear competitive edge. The tried and trusted industrial robot technology provides exceptional levels of reliability. During the milking process, there is no more technology present under the cow. Lower stress levels, but also a reduced risk ...

    By Insentec B.V. based in Marknesse, NETHERLANDS. from Cattle Mgt- Automatic Milk System Product line

  • Bulk Milk Coolers Unit (BMCU)

    We at Tol technocrats give various solutions for retaining the natural quality of the milk. We are an more than two decade old company led by technocrats who have all the practical knowledge for giving the right solution for various customers in the Dairy Industry. We design  and manufacture Bulk Milk Coolers in both “Direct Expansion” (DX) as ...

    By TOl Controls Pvt. Ltd. based in Ahmedabad, INDIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you