Only show results in Virginia? Ok

orchard pruning Equipment

  • Lisam - Model SLY - Orchards - Pneumatic Shears

    Sly pneumatic shears, manufactured by Lisam for many years now, feature blades forged specifically for pruning orchards and made of a special alloy that enables the farmer to also work at low temperatures, without any change in cutting power.To make Sly shears comfortable and productive, Lisam has reduced their weight to just 550 ...

    By Lisam s.r.l. based in Imola (BO), ITALY. from Pruning Product line

  • Model FL200P - Pruning Machine

    The new B.M.V. pruning machine for green and dry trees model FL200P has been developed for pruning green and dry intensive orchards with or without anti-hail net. For dry pruning it can fit discs Ø 350 for branches until 6-7 cm. of diameter. For green pruning, in a quick and easy way, it is possible to fit knives.

    By B.M.V. s.n.c. based in Alba (CN), ITALY. from Orchard Machines- Pruning Machines Product line

  • Model FL500P - Trimming Machine

    The new B.M.V. 'FL500P' trimming machine has been studied to lop both trees still green and those dry, like citrus, olive groves and orchards on two rows, at the same time To trim dry trees, there are some turning discs AE 500 for orchards branches until 15 cm. of diameter. In order to lop, in a very simple and quick way, trees still green, there ...

    By B.M.V. s.n.c. based in Alba (CN), ITALY. from Orchard Machines- Pruning Machines Product line

  • Model S800K - Trimming Machine

    The B.M.V. 'S 800K' trimming machine has been studied to lop kiwi green trees. The machine is applied to the front part of the tractor. The power is supplied by the tractor hydraulic intakes or by an independent hydraulic unit. Hardened steel blades ensure the best quality of lopping with high cutting speeds (2000/2500 rev./min) even when the ...

    By B.M.V. s.n.c. based in Alba (CN), ITALY. from Orchard Machines- Pruning Machines Product line

  • Model FL800P - Trimming Machine

    The new B.M.V. 'FL800P' trimming machine has been studied both for orchards and olive groves still green and for the dry lopping; to trim dry trees, there are some turning discs Ø 400 for orchards branches until 6cm. of diameter. In order to trim, in a very simple and quick way, the trees still green, there are some knives. The Top upper ...

    By B.M.V. s.n.c. based in Alba (CN), ITALY. from Orchard Machines- Pruning Machines Product line

  • INFACO ELECTROCOUP - Model F3015 - Electric Pruning Shears

    The ELECTROCOUP F3015 electric pruning shears are the new reference. A tool designed for pruning professionals, the F3015 positioned itself in line with its predecessors as a reliable, high-quality tool, approved by all its users throughout the world.  High quality materials have been selected with the utmost care to develop this new model. ...

    By INFACO s.a.s based in Cahuzac sur Vère, FRANCE. from Vineyard Equipment and Orchard Equipment Product line

  • Orcharding

    The flame weeding technique may be applied using different methods and with different types of equipment depending on the problems to be tackled in orchards, vineyards or kiwi groves. Operation modes and speed, and therefore costs of the execution, depend on how much weed has grown and spread and the type of operation to be implemented.

    By Officine Mingozzi based in Bando di Argenta, ITALY. from Flame Weeding Product line

  • Pruner - Model BGP 4000DV - Pruning Machines

    BGP 4000DV is used in agriculture for lopping or shearing orchards, citrus plantations, olive groves, hazelnut orchards, etc... This version is suitable for all types of orchards and it can make horizontal topping maximum 4.5 m (14.8 ft). Thanks to the double cutter bar it halves the time of pruning compared to a normal version. It is installed in ...

    By Officina Meccanica B&G based in Città di Castello, ITALY. from Pruning Machines Product line

  • Pruner - Model BGP 4000A - Pruning Machines

    BGP 4000A is used in agriculture for lopping or pruning orchards, citrus plantations, olive groves, hazelnut orchards, etc... This version is suitable for all types of orchards and it can make horizontal topping maximum 4.5 m (14.8 ft). It is installed in front of the tractor by a universal front mount. The innovative and patented double blade ...

    By Officina Meccanica B&G based in Città di Castello, ITALY. from Pruning Machines Product line

  • Model TH1000NS Kit - Medium Duty Topper / Hedger

    The TH1000NS kit is a medium duty topper / hedger.  The center boom provides the ability to operate efficiently in tight planted orchards.  The design of the machine allows the cutting head the ability to swing in and out, over the row providing extra reach and as well as the ability to cut over the center of the row.   The ...

    By TOL, Inc. based in Tulare, CALIFORNIA (USA). from Pruning Machine Product line

  • BORELLO - Model 8 BL - Pruning Rake

    BORELLO NEW 8, pruning rakes make a 50 to 120 cm. wide swath of pruned branches in the middle of the row. This makes shredding or cleaning easier. A shock-absorber (BORELLO pruning rake patent) makes the operation easier. The elasticity of the spring tines permits to work in any kind of orchard whatever the ground. The gearbox parts are in oil ...

    By Abimac srl based in Savigliano, ITALY. from Pruning Rake Product line

  • Girolivo - Model 320-9 B.L. - Pruning Rake

    The Girolivo rake by BORELLO is a specific tool for olive groves. It permtis to form a swath in the centre of the tree row with the brances cut for pruning and makes cleaning easier, especially if you are using a branch cutter.  Girolivo by BORELLO permits to form a swath in a variable width. The hydraulic side shift obtained with a ...

    By Abimac srl based in Savigliano, ITALY. from Pruning Rake Product line

  • BORELLO - Model 8 BC - Pruning Rake

    BORELLO NEW 8, pruning rakes make a 50 to 120 cm. wide swath of pruned branches in the middle of the row. This makes shredding or cleaning easier. A shock-absorber (BORELLO pruning rake patent) makes the operation easier. The elasticity of the spring tines permits to work in any kind of orchard whatever the ground. The gearbox parts are in oil ...

    By Abimac srl based in Savigliano, ITALY. from Pruning Rake Product line

  • Pruning Equipment

    The professional sales associates at George F. Ackerman Co. are ready to assist you with choosing the proper orchard or nursery pruning equipment to fit your needs.  Some of the equipment we carry includes: Brewt Power Systems Maibo Air Powered Pruning Systems.

    By George F. Ackerman Company based in Curtice, OHIO (USA).

  • Fruit Pruner for Orchards

    Orchard Pre Pruning machine mod. FRUIT, suitable for all type of orchards varieties like apple, pears, apricots, cherries and more, thanks to 'SCH-PRO CUT' teeth it can work with in 3- 4 cm as diameter.

    By Orizzonti s.r.l. based in Imola Bologna, ITALY. from Pruners for Orchards Product line

  • Prune Harvesting

    ENE has been providing holistic orchard services for California Prune growers for the last 4 decades. Mechanical Harvesting, Pre-season Mechanical Fruit Thinning, In-Field Sizing, Trucking Coordination, Overall Harvest Coordination.

    By Erick Nielsen Enterprises, Inc. based in Orland, CALIFORNIA (USA).

  • Model RR - Pruning Pickers

    The pruning pickers is ideal to rake pruned tree branches in the centre of tree rows to permit an easy choppering or picking. It is made on three working width and with two htich three point.     longer hitch for any kind of orchad  RRL. short hitch for espalier type orchard  RR.

    By DA ROS GREEN S.R.L based in Mareno DI Piave (TV), ITALY. from Oenology - Vineyard Product line

  • Model CPM 60 - Pre-Pruning Machines

    The CPM 60 Orizzonti pre-pruner is a pruner for vineyards and orchards with movable arm mounted to the front of the tractor equipped with steel press branches barrel rod (PATENTED) and dry mowing bar. Requires 130 Bar and 22 l of oil per minute. For tractors of 50 HP/34 Kw.

    By Orizzonti s.r.l. based in Imola Bologna, ITALY. from Pre-Pruning Machines Product line

  • Model CPF 60 - Pre-Pruning Machines

    The CPF 60 Orizzonti pre-pruner is a pruner for vineyards and orchards with fixed arm mounted to the front of the tractor equipped with motorised steel press branches barrel rod (PATENTED) and dry mowing bar. Requires 130 Bar and 22 litres of oil per minute. For tractors of 50 HP/34 Kw.

    By Orizzonti s.r.l. based in Imola Bologna, ITALY. from Pre-Pruning Machines Product line

  • Model SA 500 / 650 - Pruning / Picking Tower

    The Afron SA pruning / picking towers were designed for pruning and picking of fruit bearing trees from 9 feet (3 meters) up to 25 feet (7.5 meters).  The SA model towers are known for there very compact, stable design while maintaining the simple and rugged characteristics common to all Afron models.  Models are available to meet ...

    By TOL, Inc. based in Tulare, CALIFORNIA (USA). from Pruning / Picking Tower Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you