Only show results in Virginia? Ok

overhead irrigation Equipment

  • Overhead Spraylines With Micro Sprinklers

    Overhead sprayline watering with Micro sprinklers allows large cropped areas in either glasshouse or polytunnels to be watered using watering lines suspended in the roof of the structure, single or multi-line operation can be designed with offer a high degree of uniformity and an automated way of watering the crop.

    By LS Systems Ltd based in Tarleton, UNITED KINGDOM. from Glasshouse / Greenhouse & Polytunnel Irrigation Product line

  • Overhead Spraylines for Under Canopies

    Overhead spraylines are used in canopy and tunnel areas and offer a sprayline system mounted in the roof with micro sprinklers. This provides a CONTROLLABLE?? amount of mist over the plants.

    By LS Systems Ltd based in Tarleton, UNITED KINGDOM. from Garden Centre Irrigation Product line

  • Precise Irrigation - Model MS036 - Green Swivel, pack of 10

    This green swivel (spinner) is designed to be used in place of a spreader, with spray assemblies that are installed upside down. It gives a slightly conical pattern up to 6m in diameter. Typical applications are greenhouses and poly tunnels, where the supply pipes are overhead.

    By Precise Irrigation based in Beds, UNITED KINGDOM. from DAN Micro Sprinklers on Spikes Product line

  • Overhead Spraylines With Fogging and Humidification Nozzles

    Using the same principle with overhead spraylines but removing the micro sprinklers and replacing with a fogging/humidification nozzle allows different crops to be watered, again an automated approach to watering can be taken which allows the spraylines to be automatically turned on by a timer process or by the means of a moisture deficit ...

    By LS Systems Ltd based in Tarleton, UNITED KINGDOM. from Glasshouse / Greenhouse & Polytunnel Irrigation Product line

  • Toro - Row Crops Overhead Sprinklers

    In line with their commitment to providing specialised products for the specific needs and purposes of their consumers, Toro Ag Irrigations have developed a line of overhead mini sprinklers suited to agricultural row crops, nurseries, hothouses and even evaporative cooling in poultry sheds.

    By The Toro Company based in Riverside, CALIFORNIA (USA).

  • Watering Booms

    Watering booms are able to uniformly and automatically do overhead watering on your predetermined schedule reducing labor and wasting water.  A boom is a great system for watering in tender crops such as plugs or when multiple crops are being grown in the same zone.  Different boom styles are available depending on the use and house ...

    By Nexus Corporation based in Northglenn, COLORADO (USA). from Irrigation Systems Product line

  • Zimmatic - Model 9500P - Center Pivot

    Zimmatic’s top-of-the-line 9500P center pivot is the most rugged and durable of the company’s pivot irrigation systems. It can handle the roughest terrain and is well suited for acreage requiring the longest systems and applications that call for the most robust pivot point and pipeline structure on the market. The standard 6 5/8 inch ...

    By Koviack Irrigation and Farm services based in Three Rivers, MICHIGAN (USA). from Irrigation Systems Product line

  • Duzgunler - Irrigation Pipe

    In sprinkler or overhead irrigation, water is piped to one or more central locations within the field and distributed by overhead high-pressure sprinklers or guns. The water travels through pipes from the water source through the valves to the sprinklers.

    By Duzgunler Plastic based in Konya, TURKEY.

  • Agriculture Irrigation

    Cameron Irrigation can design, supply and install irrigation systems to suit many crops from Large boom irrigation to drip irrigation for high quality fruit and vegetables to sprinkler systems for low precipitation rates overhead irrigation.

    By Cameron Irrigation based in West Sussex, UNITED KINGDOM.

  • Senninger - Model 30 Series - Impact Sprinklers

    The 30 Series impacts are specifically designed for delivering maximum efficiency at lower flows between 1.84 to 6.42 gpm (418 to 1458 L/hr) for Senninger’s 3/4″ sprinklers.

    By Senninger Irrigation, Inc. based in Clermont, FLORIDA (USA). from Impact Irrigation Sprinklers Product line

  • Irrigation Canals

    The precise level and flow control provided by the Obermeyer Gate System facilitates controlled water diversion at rivers without fluctuations in diverted flow caused by river flow changes. Automatic water level control at canal drop structures provides uniform discharges at canal outlets under varying flow rates. Obermeyer Gate Systems can also ...

    By Obermeyer Hydro, Inc. based in Fort Collins, COLORADO (USA). from Pneumatically Actuated Gates Product line

  • Senninger - Model 50 Series - Impact Sprinklers

    The 50 Series impacts are specifically designed for delivering maximum efficiency at high flows between 6.5 to 20.1 gpm (1476 to 4565 L/hr) for Senninger’s 3/4″ sprinklers.

    By Senninger Irrigation, Inc. based in Clermont, FLORIDA (USA). from Impact Irrigation Sprinklers Product line

  • Senninger - Model 40 Series - Impact Sprinklers

    The 40 Series impacts are specifically designed for delivering maximum efficiency at intermediate flows between 3.82 to 12.6 gpm (868 to 2862 L/hr) for Senninger’s 3/4″ sprinklers.

    By Senninger Irrigation, Inc. based in Clermont, FLORIDA (USA). from Impact Irrigation Sprinklers Product line

  • Senninger - Model 20 Series - Impact Sprinklers

    The 20 series full-circle impacts areSenninger's most economical sprinklers. These sprinklers work best with low flows between 1.34 to 3.98 gpm (30410 904L/hr).

    By Senninger Irrigation, Inc. based in Clermont, FLORIDA (USA). from Impact Irrigation Sprinklers Product line

  • Sprinkler Irrigation System

    Sprinklers irrigation offers a complete line of sprinkler solutions for a wide range of crops. mini sprinklers earned a reputation as the most reliable and durable sprinklers available with their outstanding distribution uniformity and large water passages.mini sprinklers simplicity and modular design allows for easy accessory options making ...

    By GOKUL PLAST based in Ahmedabad, INDIA. from Drip Irrigation System Product line

  • Over-Head Irrigation Systems

    We are a Kenyan irrigation company dealing in irrigation design, installation, maintenance and consultancy of irrigation and greenhouse projects. Since incorporation in 2001, we have undertaken a wide range of irrigation projects. We also undertake turn-key irrigation projects. We are agents for Plastro, Israel and Richel greenhouses, France. Our ...

    By Irrico International LTD based in NAIROBI, KENYA.

  • Nursery & Glasshouse Irrigation

    Cameron offer a high standard of products and source these from worldwide major manufactures giving our customers the most modern and efficient irrigation available, with highly efficient and environmental friendly irrigation systems to all applications within the horticultural industries.

    By Cameron Irrigation based in West Sussex, UNITED KINGDOM.

  • Nelson Rotator - Model R5 - Micro Sprinkler for Full Coverage Irrigation

    The R5 Rotator is a micro sprinkler for Full Coverage Irrigation. It has higher uniformity, greater distance of throw, and provides better infiltration than comparable micro sprays or spinners. The flow control nozzle option is fully flow regulating at 15 psi (1 bar), while pressure compensation in other micro sprinklers begins to function at ...

    By Nelson Irrigation Corporation based in Walla Walla, WASHINGTON (USA). from Rotator Sprinklers Product line

  • QEP - Mixing Unit

    At its core the mixing unit is a versatile and universal controllable conditioning unit to prepare the irrigation water for your crop. All mixing units are custom build to suit your situation best. The mixing units can be applied in direct irrigation to the field, whether you are using overhead sprinklers or drippers, or in indirect irrigation ...

    By Quality Engineering Production (QEP) based in De Meern, NETHERLANDS.

  • Urapivot - Center Pivot

    Center Pivot Is a form of overhead sprinkler irrigation consisting of several segments of pipe on galvanized steel joined together and supported by trusses, mounted on wheeled towers with sprinklers positioned along its length. The machine moves in a circular pattern and is fed with water from the pivot point at the center of the circle. This ...

    By Grupo Chamartin, S. A based in Madrid, SPAIN. from Center Pivot & Lateral Urapivot Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you