Only show results available in Virginia? Ok

parlour milking Equipment

  • PANORAMA EFFECT - Side by Side Type Milking Parlour

    Cows take their places in the milking parlour, standing at the angle of 90 degrees to the milking channel. The ultimate goal of this solution is to ensure high performance owing to quick process of cow positioning for milking and high capacity of the system. Grouping of cows in the herd as per similar milking times is a key element in the ...

    By Serwis-Centrum Ltd based in Bydgoszcz, POLAND. from Milking Parlours Product line

  • Herringbone Rapid Exit

    The Herringbone – Rapid Exit milking parlor is addressed to larger dairy farms. This type of milking system is designed to ensure comfortable animal positioning, high throughput  & quick exit of the animals after the end of milking process .  The elevation of the stall is achieved via the use of pneumatic cylinders.

    By Agromasters LTD based in Thessaloniki, GREECE. from Milking Parlours - Milking Parlours for Cows Product line

  • Model C1 - Milking Carousel ComfortFlow

    The milking carousel C1 ComfortFlow features optimal automation while ensuring high operating comfort for the milker. All requirements for ensuring a professional milking management and maximum milking capacity are fulfilled. The platform is controlled in dependence of the milking status of the animals and guarantees smooth entry and exit of the ...

    By System Happel GmbH based in Friesenried, GERMANY. from Milking Parlours Product line

  • Panorama Classic - Fish Bone Type Milking Parlours

    This type of milking parlour is the most popular of all solutions used in our country. This is not without reason. This solution is popular because of the simplicity of the system, low cost and small area occupied per one cow. With this solution, the milker has not only a quick access to the cow's udders but also has a comfortable and safe working ...

    By Serwis-Centrum Ltd based in Bydgoszcz, POLAND. from Milking Parlours Product line

  • PANORAMA - Swing Arm Milking Parlours

    A system with a swing arm serves two stands simultaneously which significantly improves the investment’s cost-efficiency and the system’s later use. This system is relatively unpopular in Poland but rather due to the farmers’ habits than because of the equipment’s features. The main advantage of this milking method is ...

    By Serwis-Centrum Ltd based in Bydgoszcz, POLAND. from Milking Parlours Product line

  • Hanging Herringbone Milking Parlour

    This is the most traditional model. It is built from 2x3 to 2x12 and with the robustness given by the 2' tube. The hanging version by floating support and beam gives the advantage of avoiding any obstacles between worker and cow, thus reaching more comfort and quickness preparing udder. Its design and robustness allows a perfect fluidity and ...

    By ELMEGA, S.L. based in Santa Comba, A Coruña, SPAIN. from Milking Parlours Product line

  • Swing-over Milking Unit

    In the swing-over milking parlour, each milking unit is used for two milking parlour sides. The milking unit is simply swivelled from one side over to the other side via a rotating element. Automatic detachment and milk quantity measurement can be integrated. Significant cost savings can be achieved as only one milking unit is required for two ...

    By System Happel GmbH based in Friesenried, GERMANY. from Milking Parlours Product line

  • Parallel Parlors

    Parallel parlors provide milkers easy access to the udder between the cow’s back legs.

    By FARMTEC a.s. based in Jistebnice, CZECH REPUBLIC. from Parlours and Milking - Milking Parlors Product line

  • Herringbone

    The agromasters herringbone milking parlor combines advanced milking technology, but always with the lowest required investment. The milker sees clearly the 4 teats of the cow due to herringbone indexing of the animals. The ergonomic working position for the operator – ensures a comfortable milking job.

    By Agromasters LTD based in Thessaloniki, GREECE. from Milking Parlours - Milking Parlours for Cows Product line

  • Dutchlac - Milking Parlours

    Dutchlac milking systems have been specially developed to perform under heavy circumstances. Therefore the milking parlours are equipped with heavy steel structures made from thick galvanized steel, robust milk claws and durable components for easy maintenance at low costs. The Dutchlac milking parlours will work under any circumstance.

    By Van der Ploeg International BV based in Leeuwarden, NETHERLANDS. from Milking Equipment Product line

  • Heringbone - Milking Parlors

    Heringbone is the most common type of milking parlors. It is suitable for middle-sized and large herds. Distance between stalls is 1150 mm, so milkers have easy access to the udder. The construction of the milking parlours is carried out in the basic design (without slatted floor) or with a slatted canal. Defecation sheets are galvanized ...

    By FARMTEC a.s. based in Jistebnice, CZECH REPUBLIC. from Parlours and Milking - Milking Parlors Product line

  • Unipuls - Milk Measurement Meter

    The Unipuls milk meter is certified by ICAR for amilk speed of 15 litres per minute. In the milkmeter there is no electronic device. The milk measurement is based on a very simple and accurate measurement principle, where milk is collected in a double tipping scale. Each half of this tipping scale may contain 100 grams of milk. When one half is ...

    By FARMTEC a.s. based in Jistebnice, CZECH REPUBLIC. from Parlours and Milking - Milking Equipment Product line

  • Crowd Gate

    The crowd gate is a metal gate which divides groups of cows in the holding pen before milking. It gently pushes the cows towards the milking parlour. The gate is driven by pressure air. After the gate arrives to the milking parlour and the last cow enters the milking parlour, the gate operator, with the help of pressurized air, lifts the gate and ...

    By FARMTEC a.s. based in Jistebnice, CZECH REPUBLIC. from Parlours and Milking - Milking Equipment Product line

  • Tandem Milking Parlor

    Tandem milking parlor allows the individual entry and exit of dairy cows into and out of the cowstalls and the operator's easy access to the udder. The construction of the milking parlours is of a modular design using galvanized materials. Gate control can be manual, pneumatic, or a so-called pneumatic auto-tandem. Tandem milking parlours are ...

    By FARMTEC a.s. based in Jistebnice, CZECH REPUBLIC. from Parlours and Milking - Milking Parlors Product line

  • Milking Parlours

    Excellent, well regulated milking equipment is very important to achieve high quality milk and good udder health. Therefore Van der Ploeg International developed its own milking parlours named: DUTCHLAC, delivered in 3 variants:

    By Van der Ploeg International BV based in Leeuwarden, NETHERLANDS. from Dairy Farms Product line

  • Midiline Milking System

    Choosing to install a midiline milking system is the base equipment for excellent milking. All Pearson parlours are fitted with durable milking clusters, reliable pulsation systems and strong stall work. All Pearson parlours are easily upgraded, whether it is the number of units or level of technology.

    By Pearson International LLC based in Co. Kildare,, IRELAND. from Herringbone Parlours Product line

  • Model 50° - Parallel Milking Parlour

    Our milking systems are uniquely designed to support the modern dairy farm. With advanced technology and productive dairy management we are able to support both the cow and operators requirements. We supply various milking parlours with high quality galvanized or stainless steel construction, with full automation and avant-garde solutions that ...

    By TDM- Nutriservice s.r.l. based in San Paolo BS, ITALY. from Cows- Milking Product line

  • Inside Rotary Milking Parlour

    Herringbone or parallel structure, made of stainless steel or galvanized steel; platform rotation by gearmotors with variable speed .The rotation speed is manually controlled by the operator, to adapt it to the needs of the milking routine.

    By TDM- Nutriservice s.r.l. based in San Paolo BS, ITALY. from Cows- Milking Product line

  • Outside Rotary Milking Parlour

    Herringbone or parallel structure, made of stainless steel or galvanized steel; platform rotation by gearmotors with variable speed .The rotation speed is manually controlled by the operator, to adapt it to the needs of the milking routine.

    By TDM- Nutriservice s.r.l. based in San Paolo BS, ITALY. from Cows- Milking Product line

  • Model 90° - Parallel Milking Parlour

    Our milking systems are uniquely designed to support the modern dairy farm. With advanced technology and productive dairy management we are able to support both the cow and operators requirements. We supply various milking parlours with high quality galvanized or stainless steel construction, with full automation and avant-garde solutions that ...

    By TDM- Nutriservice s.r.l. based in San Paolo BS, ITALY. from Cows- Milking Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you