Only show results available in Virginia? Ok

pipe milking installation equipment

  • PS Test Sampler

    The Peristaltic Test Sampler is developed to take quality samples of milk in milk trucks during the pumping of the milk at the milk supplier. The benefits of using the test sampler are: It is a dosing and rotating test sampler which is installed on horizontal pipes. There is no carry over between the suppliers. The test sampler can take one or two ...

    By Poul Tarp A/S based in Randers, DENMARK. from PS Test Sampler Product line

  • scheme of work of the filter

    Open the cover. Hight-effective milk filter UVMILK is inserted into a cover of filter housing. Then is located in the case. The cover of the case twists well. Secure the housing to the pipe with clamp.The milk filter should be install after the milk pump before the cooler

    By UVMILK based in Voronezh, RUSSIA. from scheme of work of the filter Product line

  • Model PV ll - Test Sampler

    The PV II sampler is developed to take quality samples of milk in milk trucks during the pumping of the milk at the milk supplier. The benefits of using the test sampler are: The test sampler is built into the pump system and therefore it is possible to take out a constant amount of milk at any time. The test sampler can only be installed on ...

    By Poul Tarp A/S based in Randers, DENMARK. from Test Sampler Product line

  • Model SMW 4 - Test Sampler

    The SMV 4 sampler is developed to take quality samples of milk in milk trucks during the pumping of the milk at the milk supplier. The benefits of using the test sampler are: The test sampler is built into the pump system and therefore it is possible to take out a constant amount of milk at any time. The SMV 4 test sampler can be installed on both ...

    By Poul Tarp A/S based in Randers, DENMARK. from Test Sampler Product line

  • Model Supa4 - Herringbone Systems

    Known for its fast, clean milking characteristics the Waikato Supa4 has out performed and out sold all others in its class. The Supa4 has a standard installation process that ensures the integrity of the product. The design calls for a single 100mm milk-pipe draining into a receiver at one end of the pit. It is impossible to flood a ...

    By Waikato Milking Systems LP based in Hamilton, NEW ZEALAND. from Herringbone Systems Product line

  • Rings for Screwed Pipe Connections

    Rings for screwed pipe connections according DIM 1185. Sealing rings for milk pipes are standard for connection with pipes and are primarily used for the food industry. The standard sizes are produced accordingly to the DIN 11851. Through the opening of the flange groove, a seal removal and installation is an ease. There are Sealing rings for milk ...

    By ULMAN Dichtungstechnik GmbH based in Sindelfingen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you