Only show results available in Virginia? Ok

Plant Canopy equipment

  • Model LAI-2200C - Plant Canopy Analyzer

    Non-destructive measurements of Leaf Area Index, Autonomous or wired optical sensor operation to accommodate numerous canopy types and sampling protocols, Calculates mean foliage inclination angle and canopy gap fraction, Accurate in most daylight conditions, Measures almost any canopy type with the appropriate sampling protocol, Exclusive ...

    By DMP Ltd. based in Fehraltorf, SWITZERLAND. from Plants Product line

  • Premium

    Delta-T SunScan - Model SS1 - Canopy Analysis Systems

    The SunScan Canopy Analysis System uses field measurements of Photosynthetically Active Radiation (PAR) in crop canopies to provide valuable information about Leaf Area Index (LAI) and biomass production. The SunScan canopy analyser is optimised for low regular canopies such as most agricultural crops. The 1m probe enables rapid spatial averaging ...

    By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Plant Science Product line

  • LI-COR - Model LAI-2200C - Plant Canopy Analyzer

    The LAI-2200C Plant Canopy Analyzer calculates Leaf Area Index (LAI) and other canopy structure attributes from radiation measurements made with a “fish-eye” optical sensor (148° field-of-view). Measurements made above and below the canopy are used to determine canopy light interception at 5 angles, from which LAI is computed using a model of ...

    By LI-COR based in Lincoln, NEBRASKA (USA).

  • Virtual - Plant Canopy Analyzer

    Owing to our profound experience in the industry, we have been able to offer our valued clients with Plant Canopy Analyzer. Our plant canopy analyzer endeavor convenient and flexible tools for calculating and analyzing incident and transmitted Photo synthetically Active Radiation (PAR) in Crop and Forest canopies. It ensures that all the important ...

    By Virtual Electronics Company based in Roorkee, INDIA.

  • Model CI-110 - Plant Canopy Imager

    The NEW Plant Canopy Imager CI-110 captures wide-angle canopy images while estimating Leaf Area Index (LAI) and measuring Photosynthetically Active Radiation (PAR) levels. Images live-update on the built-in capacitive monitor, providing instant data for verification and analysis with integrated software in the field under any daylight conditions. ...

    By CID Bio-Science, Inc. based in Camas, WASHINGTON (USA).

  • Premium

    Delta-T - Model HemiView HEMIv9 - Forest Canopy Image Analysis System

    The HemiView canopy image analysis system provides the hardware and software needed to acquire and analyse hemispherical images of forest canopies.

    By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Plant Science Product line

  • Topcon - On-the-Go Crop Canopy Sensor

    CropSpec is a real-time integrated crop monitoring and application system for agricultural equipment, developed in cooperation with Yara International. Designed for use with Topcon’s X20 or X30 consoles, CropSpec operates with the VRC program (MapLINK) or any of the X20 or X30 application controllers and allows the user to monitor in-field ...

  • Model BDR16 - Growth Chamber

    The BDR16 is designed for high-end plant physiology research where tight performance is critical to ensure a consistent plant canopy temperature throughout the chamber. To achieve tight performance, this unit employs a constant temperature lamp bank, cooled by the refrigeration system, which results in a constant light intensity output regardless ...

    By Conviron based in Winnipeg, MANITOBA (CANADA). from Plant Growth Product line

  • LIDARAJ - Model KZSV - Grain Drying and Cleaning Plant

    The grain drying and cleaning plant «LIDARAJ» is intended for acceptance lots of grains, leguminous, corn, rape and cereals from transport, its subsequent preliminary clearing, drying, time storage and unloading in vehicles or storehouse.

    By Lidselmash based in Lida, BELARUS. from Drying Plants Product line

  • OMEX - Model DP98 - Water Soluble Phosphorous

    Phosphorous is essential to all plants for optimum yields. Base phosphatic fertilisers often fail to supply the crop with sufficient phosphorous. Factors such as soil type, soil moisture and soil pH can interrupt the supply of phosphorous to the crop especially at critical periods during the development phase. Conventional phosphate products will ...

    By Omex Agriculture Ltd based in Lincoln, UNITED KINGDOM. from Agriculture - Plant Health Promoters Product line

  • Lighting Technologies for Plant Cultivation

    Lighting technologies for plant cultivation are rapidly improving. Important issues are fixture efficiency in the PAR range, canopy capture, and waste heat generation. Lemnis Oreon has developed a fixture that uses the highest efficiency LEDs arranged in a high intensity fixture designed with a continuous canopy and the cultivation environment in ...

    By Envirotech Greenhouse Solutions based in Richmond, CALIFORNIA (USA). from Energy Technologies Product line

  • Beta - Deep-Reflecting Reflectors

    Designed to deliver exceptional efficiencies and uniformly deep penetration of light into the canopy.

    By P.L. Light Systems Inc. based in Beamsville, ONTARIO (CANADA). from Horticulture Lighting Product line

  • Apogee - Model MQ-100 - Quantum Integral Sensor with Handheld Meter

    The MQ-100 has a sensor integrated into the top of the hand-held meter that displays and stores measurements. Typical applications include PPFD measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. ...

    By Apogee Instruments, Inc. based in Logan, UTAH (USA). from Original Quantum Sensors Product line

  • Zeta - Deep-Reflecting Reflectors

    Designed to deliver exceptional efficiencies and uniformly deep penetration of light into the canopy.

    By P.L. Light Systems Inc. based in Beamsville, ONTARIO (CANADA). from Horticulture Lighting Product line

  • Leaf Wetness Sensor

    The Decagon Leaf Wetness Sensor (LWS) determines the presence and duration of canopy wetness, allowing you to forecast disease and protect the plant canopy. Because the Leaf Wetness Sensor measures the dielectric constant, droplets do not need to bridge electrical traces for the sensor to detect moisture. The presence of water or ice anywhere on ...

    By Rain Bird Corporation based in Azusa, CALIFORNIA (USA).

  • Solo-tek- Grow - Organic and Mineral Fertilizer

    Designed to provide everything a plant needs to grow a lush canopy full of potential, Solotek packs a serious punch. Taking over a week to mix this formula has both organic and mineral components that help plants grow vigorously when used by itself. Adding supplements only makes the results more incredible.

    By Grotek Manufacturing based in BRITISH COLUMBIA (CANADA). from Base Nutrients Product line

  • Apogee - Model SQ-120 - Electric Calibration Quantum Sensor

    The SQ-120 is a self-powered, analog original quantum sensor with a 0 to 800 mV output that has been calibrated for use with electric lights. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, ...

    By Apogee Instruments, Inc. based in Logan, UTAH (USA). from Original Quantum Sensors Product line

  • Apogee - Model SQ-500 - Full-spectrum Quantum Sensor

    The SQ-500 is a self-powered, analog full-spectrum quantum sensor with a 0 to 40 mV output. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser. Typical applications include PPFD measurement over plant canopies in ...

    By Apogee Instruments, Inc. based in Logan, UTAH (USA). from Full-spectrum Quantum Sensors Product line

  • Apogee - Model SQ-224 - Amplified 4-20 mA Electiric Calibration Quantum Sensor

    The SQ-224 is an amplified original quantum sensor with a 4 to 20 mA output that has been calibrated for use with electric lights. The sensor was designed for use in environments with significant background electrical noise that can be found in many industrial applications. The sensor features a rugged, self-cleaning sensor housing design. Typical ...

    By Apogee Instruments, Inc. based in Logan, UTAH (USA). from Original Quantum Sensors Product line

  • Apogee - Model SQ-311 - Sun Calibration Line Quantum with 10 Sensors

    Apogee line quantum sensors measure a spatial average of PAR (Photosynthetically Active Radiation). The SQ-311 has a sensor bar with 10 sensors and is self-powered with a 0 to 4 V output. The sensor is calibrated for use in sunlight. The sensor housing design features an integrated bubble level and is fully potted making the sensor weatherproof. ...

    By Apogee Instruments, Inc. based in Logan, UTAH (USA). from Original Quantum Sensors Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you