Planter Equipment In Arizona
-
Manufactured by John Deerebased in USA
Track kit for a 24 row 1770 NT John Deere planter. The track kit replaces four center frame tires with a pair of 16.5 inch wide tracks. This will give you about 4 times the foot print of the tires. These tracks will allow you to run fertilizer coulters and most other attachments you would normally use on your planter. The kit is a direct ...
-
Manufactured by Monosembased in FRANCE
The MS Version B unit has one meter on each row unit, with a minimum line spacing of 8 inches. It is suitable for single line vegetable ...
-
Manufactured by John Deerebased in USA
12 rows on 30-in. spacing. Available with optional ExactEmerge™ or MaxEmerge™ 5e row unit or standard in mini-hopper, 1.6-bu., or 3-bu. MaxEmerge™ 5 row unit. Insecticide option for mini-hopper and 1.6-bu. 3-section frame flexes 21 degrees up & down with narrow transport of 12 ...
-
Manufactured by Monosembased in FRANCE
The MS Version A unit has one meter on each row unit, with a minimum line spacing of 8 inches. It is suitable for single line vegetable ...
-
Distributed by Schiller Grounds Care Inc.based in USA
Dig furrows in any soil! Two special tines dig deep, 6' wide furrows, perfect for tomato plants and corn, beans, potato eyes, asparagus roots, onion sets, and flower bulbs. You get drought-resistant root growth and excellent yields from root crops. Great for tilling in narrow areas. Saves time and energy in the garden! Also perfect for creating raised beds, or cutting trenches for underground ...
-
Manufactured by John Deerebased in USA
24 mm x 200 mm Bolts Tank Bracket to Hard Bar end. 24 mm Hardened Flatwashers . 3/4' x 2 1/2' Bolts Tractor Bracket to Conversion. 3/4' x 2 1/2' Bolts Conversion to Saddle. 3/4' Lockwashers . 3/4' Nuts . Nylon Straps Tank to Saddle ...
-
Manufactured by John Deerebased in USA
The 1770NT Planters are among the most productive and adaptable planters on the market. These planters get you there, get the job done, and then get you to the next field. On the road, the 1770NT planters transport at a narrow 12 feet. Plus, the hydraulic system provides true 'fold and go' operation from the ...
-
Manufactured by Monosembased in FRANCE
The MS Version C unit has one meter on each row unit that can plant two seed lines 2 – 4 inches apart using a split shoe. The row unit has a minimum row spacing of 8 inches. It is suitable for double line vegetable planting. The row unit is the same as a MS Version A unit, with a double seed plate and split shoe as well as an additional seed ...
-
Manufactured by John Deerebased in USA
The DB90 Planter can plant 36 rows on 30-inch spacing. It's only available with Pro-Series XP row units and can be equipped with the Central Insecticde ...
-
Manufactured by John Deerebased in USA
The John Deere 1700 Rigid Integral Planter has proven performance and pick-up-and-go mobility so you can get more planting done with ease. This planter continues to have a strong following in conventional and reduced till fields. It has a tough and rugged 7 x 7 inch steel mainframe and numerous features that give you dependability in the ...
-
Manufactured by Monosembased in FRANCE
NC Classic: A simple and sturdy planter. NC Technic: A multi-purpose ...
-
Manufactured by Monosembased in FRANCE
Specially developed for low-till techniques, no-till planting and intensive conditions of use. The Monoshox NX M metering unit is the result of the know-how and experience of MONOSEM in the field of depth control with discs in Europe since 1989 with the NG Plus. The Monoshox NX M planter is designed for demanding farmers and contractors ...
-
Manufactured by Monosembased in FRANCE
The reference in planters which combines precision and versatility. Launched in the 70’s in the United States the notion of planting resting on the ground directly in line with the seed drop or « American system of planting » exists in MONOSEM since 1989. But since 20 years, the NG Plus has not ceased to progress to further ...
-
Manufactured by Monosembased in FRANCE
A range suitable for working at high speeds with the MONOSEM quality ...
-
Manufactured by Monosembased in FRANCE
This row unit uses a 5” x 5” square toolbar making it easier for smaller tractors to handle, yet strong enough to withstand many years of planting with minimal expense. Perfect for smaller operations, such as roadside vegetable markets, this row unit works best in conventional or slightly till ground. Planters are available in ...
-
Manufactured by Monosembased in FRANCE
×7 linkages offer a wide selection of downforce options for all field conditions. Planters are available in rigid, stacking, and pull-type toolbars, with sizes ranging from 1 to 36 ...
-
Manufactured by John Deerebased in USA
To get the best crop, seed must be planted at the right time, at the right depth, with the right spacing and with the right fertilizer program. That’s why we made the 1770 Planters more flexible – to match the way you ...
-
Manufactured by Monosembased in FRANCE
Every part of the metering system is precision engineered and then precision manufactured to ensure accurate seed singulation every time you plant. The quality and precision of the MS metering boxes enable an identical adjustment on all units ensuring accurate seed ...
-
Manufactured by First Products, Incbased in USA
1st Products Double Disc Liquid Applicators allow fertilizer to be placed right next to the row without dragging up ...
-
Manufactured by Case IH - a division of CNH Globalbased in UNITED KINGDOM
Experience the most powerful Magnum tractors yet - providing the ultimate mix of industry-leading horsepower and fuel efficiency. The new lineup includes significant horsepower upgrades, using field-proven Case IH SCR-only engines with a new CVT transmistion configuration that maximizes available ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you