planter Equipment in California

  • Model SLP4 Series - Planter Sled

    4-row planter sled designed for 36', 38', 40' or 42' spacing. 3-point mount, Category II or III. Sled is fully adjustable and shapes bed prior to planting. Planters mount on tool bar behind shaper. Includes landslides, UHMW-lined shaper plates, skid runners, 3 tool bars.

    By B. W. Implement Company based in Buttonwillow, CALIFORNIA (USA).

  • Planters Vacuum

    The Gearmore Precision Vacuum Planters are designed for extremely accurate vegetable seed placement. The P.T.O. driven turbine fan or optional hydraulic drive creates a vacuum that draws seeds against the seed plates. Inner and outer singulators remove doubles to insure that individual seeds are secured to the vacuum hole. At the seed release ...

    By Gearmore, Inc. based in Chino, CALIFORNIA (USA). from Other Products Product line

  • Sutton Ag Stacker Bar - Transporting Large Planters

    The popularity of wide planting beds increases every year, especially 80-inch beds. Planters large enough to plant three wide beds are difficult to transport safely and efficiently. Stacker bars can be used to condense these large planters for transportation. Our custom made stacker bars “stack” the planter units, holding them in an ...

    By Sutton Agricultural Enterprises, Inc. based in Salinas, CALIFORNIA (USA).

  • John Deere - Model 1770 NT - Planter

    Track kit for a 24 row 1770 NT John Deere planter. The track kit replaces four center frame tires with a pair of 16.5 inch wide tracks. This will give you about 4 times the foot print of the tires. These tracks will allow you to run fertilizer coulters and most other attachments you would normally use on your planter. The kit is a direct bolt on ...

    By John Deere Distributor in Santa Clara, CALIFORNIA (USA).

  • Model NC - Pneumatic Planter with Shoes

    NC Classic: A simple and sturdy planter. NC Technic: A multi-purpose planter

    By Monosem Distributor in Dos Palos, CALIFORNIA (USA). from Planter Range Product line

  • Model NX M - Pneumatic Planter with Double Discs

    Specially developed for low-till techniques, no-till planting and intensive conditions of use. The Monoshox NX M metering unit is the result of the know-how and experience of MONOSEM in the field of depth control with discs in Europe since 1989 with the NG Plus. The Monoshox NX M planter is designed for demanding farmers and contractors looking ...

    By Monosem Distributor in Dos Palos, CALIFORNIA (USA). from Planter Range Product line

  • NG Plus - Model 4 - Pneumatic Planter with Double Discs

    The reference in planters which combines precision and versatility. Launched in the 70’s in the United States the notion of planting resting on the ground directly in line with the seed drop or « American system of planting » exists in MONOSEM since 1989. But since 20 years, the NG Plus has not ceased to progress to ...

    By Monosem Distributor in Dos Palos, CALIFORNIA (USA). from Planter Range Product line

  • NG Plus - Model M - Pneumatic Planter with Double Discs

    A range suitable for working at high speeds with the MONOSEM quality planting.

    By Monosem Distributor in Dos Palos, CALIFORNIA (USA). from Planter Range Product line

  • V-Wing Clod Pusher

    The V-Wing Clod Pusher is a parallel linkage implement.  The V-Wing Clod Pusher is used to prepare the seed bed for proper depth, it removes clods, and it helps to optimize correct moisture content.  The V-Wing also prevents the planter from diving in and out.

    By HCL Machine Works based in California, CALIFORNIA (USA).

  • John Deere - Model 35,45,55 - Planter Tanks

    24 mm x 200 mm Bolts Tank Bracket to Hard Bar end. 24 mm Hardened Flatwashers . 3/4' x 2 1/2' Bolts Tractor Bracket to Conversion. 3/4' x 2 1/2' Bolts Conversion to Saddle. 3/4' Lockwashers . 3/4' Nuts . Nylon Straps Tank to Saddle

    By John Deere Distributor in Santa Clara, CALIFORNIA (USA). from Tank Mounts Product line

  • Galcon - Model 11000 Series - Hose End Controllers

    Galcon’s 11000 series consists of hose-end controllers.  This beautifully designed and user-friendly controller is ideally suited for use in home gardens, roof gardens, flower planters, herb gardens and seasonal flowerbeds. The controllers allow for electronic manual operation.  Operating the controllers is simple with the manual ...

    By Galcon Office in San Rafael, CALIFORNIA (USA). from Residential Gardening Product line

  • Model PC3 - Power Cultivators

    The BWImplement line of Power Cultivators are designed to form uniform bed heights and widths, also leaving a uniform seed bed at the same time, increasing moisture control and seed germination. These high-performance mulchers break up the heaviest soils for better planting performance and controlled work tillage depth, regardless of the soil ...

    By B. W. Implement Company based in Buttonwillow, CALIFORNIA (USA).

  • Model 9100 - Rigid Frame Planter

    Many operators are looking for a cost-effective planter that can capably handle the wide variety of planting conditions encountered on their operation. The model 9100 planter is engineered to accept a full complement of liquid or dry fertilizer attachments as well as row-unit-mounted or frame mounted tillage attachments that make it the ideal ...

    By Massey Ferguson - part of AGCO Corporation Distributor in CALIFORNIA (USA). from Planting & Seeding Product line

  • Johnson - Incorporator

    The Johnson Incorporator has provided superior performance and reliability to growers for over 40 years. It is a PTO powered tool used after listing to mulch, to precisely incorporate herbicide, to apply fertilizer and insecticide, or to shape seed beds. This versatile tool can also be used for planting by attaching planters to the rear bar. The ...

    By Johnson Manufacturing based in Woodland, CALIFORNIA (USA). from Tillage Equipment Product line

  • Bigham - Model 888 Series - Culti-Lister

    The Model 888 Culti-Lister gives you consistent beds across the field. With a parallel-link gang that conforms to your field like your planter units, you’ll get identical beds from one pass to the next. A vibrant mix of attachments and ground-engaging tools fit this machine to your farming practices. Plus, a few simple changes turns this ...

    By Thomason Tractor Company based in Firebaugh, CALIFORNIA (USA).

  • John Deere - Model 1700 - Rigid Integral Planter

    The John Deere 1700 Rigid Integral Planter has proven performance and pick-up-and-go mobility so you can get more planting done with ease.  This planter continues to have a strong following in conventional and reduced till fields.  It has a tough and rugged 7 x 7 inch steel mainframe and numerous features that give you dependability in ...

    By John Deere Distributor in Santa Clara, CALIFORNIA (USA).

  • Model Tri-Ply - Agricultural Bearings

    Agricultural bearings are used in conveyors, lawn mowers, combines, hay balers, planters/grain drills, augers, cotton strippers, and more. They are designed to stand up to extreme conditions and loads. There are many different designs available. Their basic components are inner and outer rings, balls, and retainers. The inner race can be round, ...

    By FIT Bearings based in Fremont, CALIFORNIA (USA). from Bearings Product line

  • ProManPTO - Finish Cut Mowers

    ProManPTO’s 48”and 60”Finish Cut Mowers are manufactured from heavy gauge steel to give you years of service. Both units feature three hardened steel cutting blades to give your pasture or field a clean, manicured cut. Our full floating hitch mechanism ensures that the mower follows the contour of the land  and the  ...

    By ProManPTO LLC based in Vista, CALIFORNIA (USA). from Attachments Product line

  • Andros - Hi Chrome Super Duty InjectionTools

    The Cast Injection Tools from Andros enables any grower to inject drip tape in a cost effective and efficient manner. The unique features incorporated into this tool's design ensure that injecting tape will be done accurately and safely. Quality construction and the use of wear resistant materials guarantee the integrity of the injected tape while ...

    By Andros Engineering Corp. based in Paso Robles, CALIFORNIA (USA). from Surface and Shallow Product line

  • Johnson - AP Double Row Tunnels

    The All Purpose is a heavy duty PTO powered tool designed to provide growers with the flexibility they need to perform multiple operations with one tool.  AP was the first tool we developed that utilized a lower hexagon shaft allowing easy re-positioning of tiller blades and the addition of plant tunnels. It is the only tool we offer that has ...

    By Johnson Manufacturing based in Woodland, CALIFORNIA (USA). from Tillage Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you