Planter Equipment Near Slovenia
-
Manufactured by Tehnos d.o.o.based in SLOVENIA
The potato planter is intended for automatic two-row planting of the tubers in various sizes. A two-row planter with an additional earthing-up device is an upgrade to the existing machine. It is intended for simultaneous planting and earthing-up of tubers with wider and higher ridges. ...
-
Manufactured by Tehnos d.o.o.based in SLOVENIA
The two-row interrow cultivator is suitable for smaller arable land. With sweep points for corn, potatoes as well as earthing-up heads, different kinds of crops can be cultivated. Standard equipment includes a fertilizer dispensing device, earthing-up ploughs, spring sweep points with holders for cultivating potatoes and corn, two seats and a control bus. ...
-
Manufactured by MaterMacc S.p.A.based in ITALY
This planter is made to change the row distance quickly and easily. The Easy-Set System (patented by MaterMacc), directly assembled on the main tool bar, allows to move the planting units simply by sliding them on the guide to the needed row distance (minimum 27 cm), without using ...
-
Manufactured by MaterMacc S.p.A.based in ITALY
This vacuum precision planter is characterized by double rigid tool bar and high robustness. Despite its dimensions (9 m working width), this planter could be tracked by tractors with a medium power and it is available in 12 and 18 rows. This model can be supplied with an integrated transport device that allows it to be easily moved ...
-
Manufactured by MaterMacc S.p.A.based in ITALY
Front device for the distribution of granular fertilizers, suitable for planters and row crop cultivators. Linked to the front three point hitch of the tractor, the tank has a capacity of 1.200 L to allow good autonomy between refills. Distribution is carried out by two volumetric metering units, activated by a 12 volt motor. This ...
-
Manufactured by MaterMacc S.p.A.based in ITALY
This planter is characterized for its simple structure and does not require specific adjustments. Planters are very compact because planting units are directly mounted on the tool bar and have a low overhanging weight. Various number of planting units can be mounted, according to the width of the tool bar and the distance between the ...
-
Manufactured by Case IH - a division of CNH Globalbased in UNITED KINGDOM
Experience the most powerful Magnum tractors yet - providing the ultimate mix of industry-leading horsepower and fuel efficiency. The new lineup includes significant horsepower upgrades, using field-proven Case IH SCR-only engines with a new CVT transmistion configuration that maximizes available ...
-
Manufactured by Sfoggia Agriculture Division S.r.l.based in ITALY
Elektra is the revolutionary precision vacuum planter with 6 or 8 rows, equipped with a new electronic device with a touch screen control that allows to manage the machine automatically and directly from the tractor cabin guaranteeing an excellent sowing precision also at 15km/h! This electronic system called 'Elektra Drive' is ...
-
Manufactured by Sfoggia Agriculture Division S.r.l.based in ITALY
Gamma Plus represents a new concept in precision pneumatic planters. Using an innovative manifacturing process with extremely high quality materials, the GAMMA PLUS offers long-term reliability both in it's simple and versatile operation and its ability to deliver high precision sowing at speeds up to 10km/h. The Gamma Plus is ...
-
Manufactured by Sfoggia Agriculture Division S.r.l.based in ITALY
Sigma HWS is the pneumatic planter suitable for no-till planting in presence of high presence of residues and for minimum tillage. Its strength and its construction quality, its simplicity and wide use permit a very high planting reliability up to working speed of 10-12 km/h. The double discs system on gauge wheels ensures a constant working ...
-
Manufactured by Sfoggia Agriculture Division S.r.l.based in ITALY
Discover is a pneumatic planter 6 row or 8 row with hydraulic adjustment of the spacing and telescopic frame closed 2,55m for the 6 row and 3m for the 8 row. The V-shaped double discs with gauge wheels permit best results even on difficult soils. Suitable for all different crops it can reach a working speed up to 10km/h. This model ...
-
Manufactured by Sfoggia Agriculture Division S.r.l.based in ITALY
Sigma 5 is the precision pneumatic planter for different soil conditions: tilled soils, with minimal tillage or no tilled soils (with residues of previous crops). The construction strenght and quality, its simple and versatile operation join with its sowing reliability at speeds of up 10-12km/h. The system with double discs on dual ...
-
Manufactured by Gebr. Brill Substrate GmbH & Co. KGbased in GERMANY
With fertilizer depot - for the whole summer. The slow release fertilizer ensures a consistent supply of all necessary nutrients and trace elements all summer long. No need to refertilize in the first twelve ...
-
Manufactured by Mascar SpAbased in ITALY
The pneumatic seed drill Oregon has as one of the main characteristic, his distribution system made of 4 proportioners having 5 sprockets each. According to the kind of seed you can make a single selection. Each single proportioner is connected to 1 distributor feeding a sowing section between 100 to 150 cm, granting in this way a very uniform quantity on the whole working ...
-
Manufactured by Mascar SpAbased in ITALY
compensates the weight of the planter: the result is the minimum trampling of the ground. The shape of the tank and the height of the attachment to the lift have been designed to optimize the operator visibility on board the tractor both in the field during working operations and on road. Allows easy transformation from fertilizer to ...
-
Manufactured by Mascar SpAbased in ITALY
As an answer to the new seeding requirements, Mascar offers the monoseed pneumatic planter MAXI with high sower. A particular care and attention have been paid to the development of 'the machine's heart'. The sower is an expression of speed and high precision in the seed laying, with a special consideration of the reliability, easy ...
-
Manufactured by Mascar SpAbased in ITALY
Arizona is a mechanical seed rill for cereals and fine seeds. It is fitted with a hopper of big dimension for long seeding range. It has also a continuous gear in oil bath for a precise and fast setting of the seeds quantity. The distributors with sprockets grant a regular and homogeneous distribution of the seeds for all of the rows even on steep slopes. Available in the versions with Suffolks, ...
-
Manufactured by Mascar SpAbased in ITALY
The precision pneumatic planter FUTURA is the Mascar's interpretation of the traditional seeding element with low sower. Thanks to the notable experience in the planting very good results in strength, simplicity and low maintenance of the machine have been obtained. The opener of the hay-cutter form permits planter use also in humid ...
-
Manufactured by Spedo F.LLI S.r.lbased in ITALY
The company F.lli Spedo has developed, after months of detailed studies and fi eld trials, a new element to reduce the working times and increase the effi ciency of the machine with a more precise and controlled laying of the tuber. The machine can also work in hilly lands of average slope thanks to the inclination of the tuber guiding channel. The new element 2016 is equipped with a device which ...
-
Manufactured by Spedo F.LLI S.r.lbased in ITALY
This machine is very simple and fuctional, each element is equipped with a large alveolar plate that turning let fall the tubers down the furrow. The Semi-automatic potato planter is driven by the driving wheel of the element. The covering of the tubers is made by the discs with adjustable inclination or by the ridgers with adjustable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you