Only show results in Virginia? Ok

Planter Attachment equipment

  • Planter Attachments

    H & S Manufacturing, Inc offers 3 types of planter attachments including: V-Plow Attachment - Used to remove dry, lumpy ground and allows the Beet Seed to be planted in moist ground for a better stand.    Available in both rigid & spring loaded models.

    By H&S Manufacturing, Inc. based in Stephen, MINNESOTA (USA).

  • Mantis - Planter Attachment

    Dig furrows in any soil! Two special tines dig deep, 6' wide furrows, perfect for tomato plants and corn, beans, potato eyes, asparagus roots, onion sets, and flower bulbs. You get drought-resistant root growth and excellent yields from root crops. Great for tilling in narrow areas. Saves time and energy in the garden! Also perfect for creating ...

    By Mantis UK Limited based in Stockport, UNITED KINGDOM. from Tiller Attachments Product line

  • Model 2967-029A/097A - Floating Residue Manager Planter Attachments

    The 2967-029A/097A Short, Floating Residue Manager is designed for planters with 30', 36', and 40' rows. The operating angle of the wheels is designed for these row-unit spacings and for faster planting speeds.

    By Yetter Manufacturing Co., Inc. based in Colchester, ILLINOIS (USA). from Planting Equipment Attachments Product line

  • Model 2940 - Air Adjust Residue Manager Planter Attachments

    Take control from the cab with the pneumatic 2940 Air Adjust Residue Manager, available in wide and narrow models. Integrated using an in-cab controller with easy-to-use adjustment buttons and five presets, the Air Adjust Residue Manager allows you to cover more ground in less time and makes it easy to adapt to planting

    By Yetter Manufacturing Co., Inc. based in Colchester, ILLINOIS (USA). from Planting Equipment Attachments Product line

  • Hawkins - Model Series S & N Forcer - Planter Fertilizer Attachment

    The ‘S’ Series Planter N Forcer is a precision injection system for your starter liquid fertilizer. You can accurately place your deep band fertilizer directly into the slit made by the single, 14” double beveled blade. The ‘S’ Series is equipped with a down stop so if you hit soft ground it will not plunge, ...

    By Hawkins Manufacturing Inc. based in Holdrege, NEBRASKA (USA).

  • Planter Drill Head

    14'- 36' Planter Augers available. Planter augers are used on 'fixed' heads.

    By Power Trac based in Tazewell, VIRGINIA (USA). from Attachments Product line

  • Cole Planter - Model 100 - McNifty Gravity Flow

    The McNifty Gravity Flow 100 is a 100 lb gravity feed fertilzer attachment. Gravity flow design, Automatic cut 0ff, Readily mounts to most cultivators, No moving parts, Holds 100 lbs. of fertilizers, Screen assures uniform application, Accurately applies up to 300 pounds per acre, Boot for spout attaches to tines to accurately place fertilizer, ...

    By Cole Planter Company based in Albany, GEORGIA (US) (USA).

  • White Planters - Model 9100 Series - Rigid Frame Planter

    Many operators are looking for a cost-effective planter that can capably handle the wide variety of planting conditions encountered on their operation. The model 9100 planter is engineered to accept a full complement of liquid or dry fertilizer attachments as well as row-unit-mounted or frame mounted tillage attachments that make it the ideal ...

    By Schmidt Machine Company based in Upper Sandusky, OHIO (USA).

  • ProManPTO - Finish Cut Mowers

    ProManPTO’s 48”and 60”Finish Cut Mowers are manufactured from heavy gauge steel to give you years of service. Both units feature three hardened steel cutting blades to give your pasture or field a clean, manicured cut. Our full floating hitch mechanism ensures that the mower follows the contour of the land  and the  ...

    By ProManPTO LLC based in Vista, CALIFORNIA (USA). from Attachments Product line

  • Model TP-46 - Planters

    The TP-46 features a time tested design that is both simple to operate and to maintain. This planter has proven itself as a true 'work horse.' The TP-46 is available with or without the cotton planting attachment. For planting all other seeds three optional grain attachments are available.

    By Covington Planter Company based in Albany, GEORGIA (US) (USA).

  • Model TP-61 - Planters

    The TP-61 features a rotary type distributor which is independently ground driven for consistent flow of fertilizer. Quick removal of the planters (2 bolts) leaves this fertilizer attachment in place for side dressing crops as they are cultivated. Planters handle seeds gently using inclined plates at speeds up to 6 mph (with Seedmaster Duplex ...

    By Covington Planter Company based in Albany, GEORGIA (US) (USA).

  • QuickHinge - Planters

    Close every lid in seconds, attach them for good. During planting, the last thing you want to deal with is lost lids. The QuickHinge keeps lids secure and makes it easier to fill your planter boxes.

    By Lundell Plastics Corporation based in Odebolt, IOWA (USA). from Planting Products Product line

  • John Deere - Model 1770 NT - Planter

    Track kit for a 24 row 1770 NT John Deere planter. The track kit replaces four center frame tires with a pair of 16.5 inch wide tracks. This will give you about 4 times the foot print of the tires. These tracks will allow you to run fertilizer coulters and most other attachments you would normally use on your planter. The kit is a direct bolt on ...

    By John Deere based in Moline, ILLINOIS (USA).

  • Bracke - Model S35.a - Seeder

    The Bracke S35.a attaches to a scarifier rig and is used to sow in conjunction with scarification. The S35.a can be attached to the T21.a, the T26.a, the M26.a, the M36.a, and a even some older two- and three-row scarifiers. The seeder senses the scarifier rig's forward speed and regulates the seed feed accordingly. The seeder can also be ...

    By Bracke Forest AB based in Bräcke, SWEDEN. from Planter & Seeder Product line

  • Sugar Beet Pneumatic Precision Planter

    Sugar Beet Pneumatic Precision Planter İt is the coulter type machine combination with optional attachment of front pressing wheel on the top of the unit and reverse blowing to the unit.

    By İrtem Agri Machines Industry & Trade CO. based in Okmeydanı, TURKEY. from Pneumatic Precision Planters Product line

  • Disc Pneumatic Precision Planter

    Usually it is more appropriate to use where there is plenty of straw waste on the field. Depth settings can be adjusted with the help of the wheels next to the planter disc, while pressure is applied with V-shaped pressure wheels at the rear of the unit. Also optionally a seed pressure wheel is attached to rear side of the planter discs for small ...

    By İrtem Agri Machines Industry & Trade CO. based in Okmeydanı, TURKEY. from Pneumatic Precision Planters Product line

  • Model MS 8100 - Vacuum Precision Planters

    This planter is characterized for its simple structure and does not require specific adjustments. Planters are very compact because planting units are directly mounted on the tool bar and have a low overhanging weight. Various number of planting units can be mounted, according to the width of the tool bar and the distance between the rows.

    By MaterMacc S.p.A. based in S. Vito al Tagliamento (PN), ITALY. from Vacuum Precision Planters Product line

  • SUPER - Model MS 4100 - Precision Planter

    This vacuum precision planter is characterized by double rigid tool bar and high robustness. Despite its dimensions (9 m working width), this planter could be tracked by tractors with a medium power and it is available in 12 and 18 rows. This model can be supplied with an integrated transport device that allows it to be easily moved without ...

    By MaterMacc S.p.A. based in S. Vito al Tagliamento (PN), ITALY. from Vacuum Precision Planters Product line

  • Model GL410 - 4-Row Cup Planter

    The potato planter GL 410 fitted directly to the rear of the tractor enables a high agility, which is necessary on many potato areas. The new developed series of 4-row potato planters meets these requirements.

    By Grimme Skandinavien A/S based in Rødkærsbro, DENMARK. from Potato Systems/Planters Product line

  • Model MS 8200 - Precision Planters

    This planter is made to change the row distance quickly and easily. The Easy-Set System (patented by MaterMacc), directly assembled on the main tool bar, allows to move the planting units simply by sliding them on the guide to the needed row distance (minimum 27 cm), without using tools.

    By MaterMacc S.p.A. based in S. Vito al Tagliamento (PN), ITALY. from Vacuum Precision Planters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you