Plough Equipment In France
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted plough with 4 to 6 ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted ploughs 4- to ...
-
Manufactured by Perrein SASbased in FRANCE
Better than ploughing: The Express Plough does not create hardpan, restructures the topsoil, refines the surface layer, and creates a mulch on the top. Exchanges between subsoil and topsoil are improved, as are the drainage of rainwater and rooting crops. The decomposition of stubble is faster, organic matter is not ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted ploughs 3-, 4- and 5-shares - up to 140 ...
-
Manufactured by Boisselet SASbased in FRANCE
Plantations earthed up mechanically (with a ridging tool) or naturally (as a result of farm machinery passing regularly) must undergo a delicate operation : UNEARTHING or PLOUGHING ...
-
Manufactured by Lessine SAbased in BELGIUM
Ideal for mixing or homogenisation of dry or slightly wet materials or pastes. The paddle rotor energetically stirs the recipe to obtain a homogenous mixture in a minimum amount of time. Characterised by a very energetic mixing process, this mixer is equipped with paddles or ploughs affixed onto a rotating shaft. They are shaped and ...
-
Manufactured by Boisselet SASbased in FRANCE
Plantations earthed up mechanically (with a ridging tool) or naturally (as a result of farm machinery passing regularly) must undergo a delicate operation : UNEARTHING or PLOUGHING BACK. Plough fitted with a mechanical feeler. ...
-
Manufactured by Franquetbased in FRANCE
The top performer in surface stubble ploughing. Ideal in TCS and in conventional operation. Reversible, Productive and Value-for-Money. The double row of SYNCHROMIX-type notched discs of 410 mm in diameter mounted on a doubled sealed hub makes the SYNCHROMIX unit highly aggressive against plant debris, wheat and maize stubble, sunflower ...
-
Manufactured by Carrebased in FRANCE
ONATAR is a semi-mounted tool for restarting ploughing and stubble breaking. The ploughing depth can be adjusted from 5 to 30 cm at 8 Km/h. With a choice of 5 tine models possible with a pitch of 275 on 4 beams, ONATAR provides an optimum flow of soil, even when there are significant residues. There are seven types of adaptable standard ...
-
Manufactured by S & M Agricolebased in FRANCE
It increases the productivity by doing protective tillage because it swells the soil without overturning. Thanks to the independent spring foot mechanisms, the foot that is exposed to the effect by coinciding with hard and stony places is disabled. Then, thanks to this automatic mechanism, the foot, which is freed from the effect, continues to work. In this way, damage to the blade and foot ...
-
Manufactured by KUHN S.A.based in FRANCE
One-piece headstock - high strength linkages between headstock and frame - reinforced beam - sheath mounted skimmers adjustable in three dimensions - complete range of plough bodies - 14' or 16' working widths - a range of depth wheels (sizes, steel or rubber, position) - simplified offsetting with pre-set positions for different tyre ...
-
Manufactured by KUHN S.A.based in FRANCE
One-piece headstock - high strength linkages between headstock and frame - reinforced beam - sheath mounted skimmers adjustable in three dimensions - complete range of plough bodies - multiple working widths - a range of depth wheels (sizes, steel or rubber, position) - combined offsetting / angling - Non-Stop Hydraulic safety - long life ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
Hydraulic Folding With Transport Locks. 1000 RPM Gearbox. 2 Speed Gearboxes. Cam-Type Safety Clutch Protection. Side Transmission With Gears. Spring Loaded Adjustable Tailgate. Rotor With welded Double Flanges. "C" Shaped 10mm Thick Blades. Rear Linkage With Depth and Pitch Adjustment. Suitable For Bed Widths up to ...
-
Manufactured by Carrebased in FRANCE
DECOMPAK is used for decompacting any type of soil, under the plough pan up to 40 cm, with a clearance under the frame of 800 mm. POLYLAB is used for "pseudo-plough" decompacting with a clearance under the frame of 800 mm. There are 3, 5, 7 and 9-tine ...
-
Manufactured by Bugnotbased in FRANCE
The mounted Rigiculteurs are equipped with tines protected by a mechanical, plough type, non-stop mechanism (1800 kg at the point ...
-
Manufactured by Kirpybased in FRANCE
Ploughing. Forged shanks with special steel. 50 cm working depth. Standard crumbling rollers on the DM 50-17. Standard road signage on the DM 50-17. NS type reinforced ...
-
Manufactured by Agriest S.A.based in FRANCE
Tillage: Plough points, Plough shares, Landsides, Shins, Skim ...
-
Manufactured by Kirpybased in FRANCE
Extremely robust devices designed for: Deep scarification (50cm). Replacing ploughing. Preparing rocky soils before aligning, crushing, picking up. Raising stones to the surface to facilitate crushing. Forged shanks with special steel. NS 50–17: Hydraulic crumbling rollers and road signage as ...
-
Manufactured by SKY Agriculturebased in FRANCE
The solution to reach productivity records. Combining cultivation with drilling thanks to a two-disc rows preparation module, the Maxi Drill allows seeding on a stubble ploughed soil but also behind a plough. The possibility to target the drilling fertilisation or to plant different species at varying doses and depths constitutes the ...
-
Manufactured by SKY Agriculturebased in FRANCE
The multipurpose tine harrow has 4 rows. It can do everything! The DDE range comprises 4 trailed models from 4m80 to 8m15. With a 840mm height below the chassis and 4 real rows of tines without wheel, the DDE tine harrow is not affected by packing. Use the flaps in shallow stubble ploughing and full scalping or without the flaps for deep ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you