Plough Equipment Near Bulgaria
-
Manufactured by Kverneland Groupbased in NORWAY
Kverneland re-introduces the trailed cultivator Kverneland Turbo in working width of 6.5m and 8m. The Kverneland Turbo has been designed with 5 rows of tines for all kind of soil cultivation: stubble cultivation after harvesting from 3cm to 15cm, seedbed preparation after ploughing and also shallow working in spring or 2nd stubble ...
-
Manufactured by Väderstad ABbased in SWEDEN
Väderstad Rapid works the soil so thoroughly that it is often possible to drill directly into stubble or after ploughing with successful results. The unique depth control allows drilling to be carried out at high speed, which gives an impressive capacity.A pneumatic distribution system delivers seed to the well proven Rapid coulter ...
-
Manufactured by Väderstad ABbased in SWEDEN
Carrier is a very powerful and versatile disc cultivator fitted with 45 cm discs made from Swedish specialist hardened steel. The driving speed is 12-15 km/h, creating very high capacity. The weight on each disc means that the working depth is maintained even in difficult conditions. The conical shape of the discs maintains the same working angle irrespective of wear and working depth, and ...
-
Manufactured by KAMT Joint-Stock Companybased in BULGARIA
The Universal deviated vineyard machines are designed to make comprehensive cultivation of the soil and fertilizing in vine-plantations with wire-constructions and inter rows, as follows: UNLM - 2,0 – from 1,60 to 2,10м. UNLM – 2,5 - from 2,00 to 2,50м. UNLM - 3,5 – from 2,50 to 3,50м. A terrain slope up to ...
-
Manufactured by Väderstad ABbased in SWEDEN
Carrier L (51 cm disc) and Carrier XL (61 cm disc) 425-825 are high capacity disc cultivator built with focus on flexibility, durability and economy. The models can be equipped with a straw harrow, CrossCutter Knife or CrossBoard Heavy, making them even more flexible and versatile. The machines have conical discs with MultiSet, where the angle can be adjusted to requirements. The discs have ...
-
Manufactured by Kverneland Groupbased in NORWAY
Knock-on is a patented system and the easiest way of exchanging parts on a cultivator: either in order to adapt the machine for the job to be done or to exchange wearing parts. Kverneland always use steel of highest quality. Thus allowing the Knock-on® system to be based on a simple locking technique: requesting only a hammer to knock on and off the parts within seconds. The Knock-on® ...
-
Manufactured by KAMT Joint-Stock Companybased in BULGARIA
The family of soil-cultivating tillers – light type is designed for fused pre-sowing soil-cultivation and between the rows of perennial plants ploughed and not ploughed areas with slope to 8° and clean of stones. They are aggregated with under dimensions and lighter types of ...
-
Manufactured by KAMT Joint-Stock Companybased in BULGARIA
The Universal deviated vineyard machines are designed to make comprehensive cultivation of the soil and fertilizing in vine-plantations with wire-constructions and inter rows, as ...
-
Manufactured by KAMT Joint-Stock Companybased in BULGARIA
The Universal deviated vineyard machines are designed to make comprehensive cultivation of the soil and fertilizing in vine-plantations with wire-constructions and inter rows, as ...
-
Manufactured by Väderstad ABbased in SWEDEN
Thanks to its array of front tools and drilling systems, the box seed drill Rapid is always the right choice, irrespective of cropping system. The unique depth control function and coulter pressure result in optimal seed placement even at high driving speeds. Few moving parts and cushioning on all working parts give the machine an extremely long ...
-
Manufactured by KAMT Joint-Stock Companybased in BULGARIA
The soil cultivating tillers – heavy type are designed for fused pre-sowing soil cultivation and between the rows of perennial plants, ploughed and not ploughed areas with slope to 8° and clean of stones. They are used at heavier ...
-
Manufactured by Religieux-Frèresbased in FRANCE
TIREX , the best way to ensure the success of your next crop.Significantly higher yields.Controlled weed eradication.Systematic reduction of soil preparation.A simple and compact design, for an intelligent alternative to ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
The 4600 series completes Valpadana’s range of equal-wheel tractors in the low-power range. These compact tractors provide superior performance and unique technical features. Supplied in a variety of configurations, with either equal wheels or oversized rear wheels, they are specially designed for intensive crop cultivations such as orchards and vineyards, greenhouses and nurseries, as well ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
The 4600 series completes Valpadana’s range of equal-wheel tractors in the low-power range. These compact tractors provide superior performance and unique technical features. Supplied in a variety of configurations, with either equal wheels or oversized rear wheels, they are specially designed for intensive crop cultivations such as orchards and vineyards, greenhouses and nurseries, as well ...
-
Manufactured by FALC srlbased in ITALY
Bobland has been developed for deep cultivation of soil intended for vegetables, both in greenhouses and larger outdoor areas. The unique rotating tines of the Bobland allow frequent, deep working of the soil without damaging the soil structure. 2) Bobland is ideal for deep cultivation of light to medium soils, even in very wet conditions. The mixing action of the rotating tines ensures that any ...
-
Manufactured by Mascar SpAbased in ITALY
With MAXI-5 continues the evolution of the MAXI element. The strong structure, the high distributor and the double opening disc grant productivity and precision with all types of seeds used in the various soil surfaces, even with subsidence and crop residues. Suitable for planting both on a ploughed field and on a ground with minimum ...
-
Manufactured by FALC srlbased in ITALY
The work of the Mechanical DIGGING MACHINE is the same as old hand digging: penetration, tear, throwing. The DIGGING MACHINE does not cause the formation of a smooth,compacted and impermeable layer as with ploughing. It leaves the ground broken, friable and permeable. Fertility of soil is improved with the DIGGING MACHINE because ...
-
Manufactured by FALC srlbased in ITALY
Freeland allows to operate in extremely wet conditions so as axtremely dry, obtaining a very good feed speed and optimal ...
-
Manufactured by Badalini Srlbased in ITALY
The subsoiler CLD/ RAMBO MINI is produced to work with tractors from 45 to 110 HP. Its versatility allows to work also in greenhouses with tracked tractors and on hilly soils. Using CLD/ RAMBO MINI can be obtained exceptional energy conservation, and the ploughing coat can be broken. This machine, in fact, is manufactured with ...
-
Manufactured by Goldoni S.p.A.based in ITALY
is infinite. Just turn the handlebars through 180° and you can use all the front-mounted implements, such as: the lawn mower, mower, snow plough, scraper, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you