Plough Equipment Near Denmark
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
2-Bodied, 3-Bodied and 4-Bodied Models. Robust, economical and versatile, the Standen BX Bed Former Series is engineered with a number of different options to suit every soil type so that you can be confident of creating a smooth and even ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
The markers are suitable for marking out as far as 24 feet from the centre of the tractor. This allows 4 ploughs down on 72 inch beds. The markers can also come in to 18 feet from the centre of the tractor for bed making using half depth. Both the left side and the right side markers can be operated without leaving the tractor seat. The ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
The ScanStone single bed tiller comes with quick change blades as standard. The machine can also come with bed makers attached on the back. The bed makers can be auto reset or shear bolt. The rear ploughs are fully adjustable to allow a well cleaned out trench and to stop the ploughs digging in ...
-
Manufactured by ScanStonebased in UNITED KINGDOM
Hydraulic Folding With Transport Locks. 1000 RPM Gearbox. 2 Speed Gearboxes. Cam-Type Safety Clutch Protection. Side Transmission With Gears. Spring Loaded Adjustable Tailgate. Rotor With welded Double Flanges. "C" Shaped 10mm Thick Blades. Rear Linkage With Depth and Pitch Adjustment. Suitable For Bed Widths up to ...
-
Manufactured by DAL-BO A/Sbased in DENMARK
CultiMax is a heavy duty 7 row harrow, which is perfect for seedbed preparation on ploughed land before maize, potatoes, grain, sugar beet etc. The working depth is controlled by 4 sets of bogie wheels. The wheels ensure precise and stable field operation. Material and soil can easily flow through the machine when cultivating at depths of ...
-
Manufactured by DAL-BO A/Sbased in DENMARK
and leaves the field even. The angle adjustment of the disc is operated hydraulically. This means that one during work can infinitely variable the working angle as to different soil types and plant residues. MaxiDisc is also suitable on ploughed land in that case you have to put the discs in angle parallel to working direction. ...
-
Manufactured by HE-VA ApSbased in DENMARK
HE-VA Front-Pakker is the ideal solution to level and consolidate new ploughed soils. Thanks to HE-VA's unique ring profile, which HE-VA has developed over the years, an excellent cutting action is achieved whilst having the weight to consolidate in front of a harrow / drill combination. 1.5, 1.65, 2.6, 3.0, 3.5 and 4.0 m working ...
-
Manufactured by HE-VA ApSbased in DENMARK
-Tiller is an effective machine for soil loosening in connection with seed bed preparation in non-ploughed fields. The working depth is controlled by 2 pivotal depth wheels in front, which are adjusted easily and simply by strong spindles. Front-Tiller is available with edge equipment as extra ...
-
Manufactured by Wikar Oy Abbased in FINLAND
We at Kronos specialise in soil preparation equipment. We have many years of experience as a manufacturer of harrows behind us, having manufactured tens of thousands of them over a period of more than 80 years. Our present range of products comprises four models ranging from 3.15 m to 4.90 m in working width. The rotary harrow has undergone considerable development during these years and its ...
-
Manufactured by CMN Maskintec A/Sbased in DENMARK
CMN stubble-seeder is a combination of a stubble cultivator and a seed sower for sowing directly onto stubble or ploughed earth. At the same time the cultivator may be used for traditional stubble tillage. The CMN stubble-seeder first cuts through the field with the stubble cultivator’s strong blades equipped with wing shares. The ...
-
Manufactured by Seko Industries Srlbased in ITALY
Suitable for the bio-masses turning in triangulart ...
-
Manufactured by Kverneland Groupbased in NORWAY
Knock-on is a patented system and the easiest way of exchanging parts on a cultivator: either in order to adapt the machine for the job to be done or to exchange wearing parts. Kverneland always use steel of highest quality. Thus allowing the Knock-on® system to be based on a simple locking technique: requesting only a hammer to knock on and off the parts within seconds. The Knock-on® ...
-
Manufactured by Kverneland Groupbased in NORWAY
Kverneland re-introduces the trailed cultivator Kverneland Turbo in working width of 6.5m and 8m. The Kverneland Turbo has been designed with 5 rows of tines for all kind of soil cultivation: stubble cultivation after harvesting from 3cm to 15cm, seedbed preparation after ploughing and also shallow working in spring or 2nd stubble ...
-
Manufactured by Kongskilde Agriculturebased in DENMARK
The Överum CT-series consists of models from 2 – 5 furrows with fully automatic hydraulic stonerelease system (H), or fixed beam version with shear bolts (F). Överum CT is designed with focus on strength and clearance, for long life and trouble-free operation. Long interbody clearance gives free flow for crop residues and enough room for modern effective skimmers. The frame design ...
-
Manufactured by Kongskilde Agriculturebased in DENMARK
The concept behind the Germinator Pro series from Kongskilde is to offer a solution for creating a high quality seedbed in ploughed conditions. The yield achieved in high value crops such as sugar beet, onions etc. bears close correlation to the level of preparation of the seedbed. Higher crop prices in general place additional ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted plough with 4 to 6 ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted ploughs 4- to ...
-
Manufactured by PÖTTINGER Landtechnik GmbHbased in AUSTRIA
Mounted ploughs 3-, 4- and 5-shares - up to 140 ...
-
Manufactured by Agrosbased in SWEDEN
has an extremely low content of nutrients, but the access to energy in the form of cellulose is good. When straw is ploughed in the field, you have to compensate for the high C/N-quota in the straw by adding fertilizer to the extent of 30 kg N/ha. Straw, used in a filter, can be ploughed in without adding expensive ...
-
Manufactured by Vicon - Kverneland Groupbased in NORWAY
With its Mecasem XTC, Vicon has expanded its range of mechanical seeders with integral mounting model based on the tried and tested Vicon Toptiller, the Mecasem XTC ensures the best seeding results after ploughing and conservation tilling. One of the main advantages for operators is the constant depth control for the coulters, thanks to the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you