Only show results available in Connecticut? Ok

plough operation equipment

  • Model PNR.5.30-40 - Ploughs

    Plows are designed for deep plowing to 33-37sm all types of soils except rocky, terrain with slopes up to 8 degrees. Typical hull is his half-loop, the presence of a protective plate the of crawl body, breast exchangeable aglosnim and a shear element overload protective housing. All this allows high-speed operation and closure of plant waste by ...

    By Ralomex JSCo. based in Zavet, BULGARIA. from Ploughs Product line

  • FreeLand - Rotary Plough

    Freeland allows to operate in extremely wet conditions so as axtremely dry, obtaining a very good feed speed and optimal result.

    By FALC srl based in Faenza (RA), ITALY. from Rotary Plough Product line

  • Model VARIO 4 - Snow plough

    The Vario 4 is mainly used on motorways and at airports, where the need is for the maximum possible clearance width with the flexibility to operate at different speeds. This blade type plough may be opened and closed in the upper section of the plough blade according to the clearance task and snow characteristics. This adjustment is performed ...

    By Zaugg Ag Eggiwil based in Eggiwil, SWITZERLAND. from Snow plough Product line

  • Optim - Model 110/3 - Reversible Ploughs

    The range of OPTIM reversible ploughs is designed to optimize the operation of plowing, allowing the decrease of approximately 30% of the equipment maintenance costs and a longer period of payback in terms of increased working efficiency.

    By Mecanica Ceahlau S.A based in Piatra, ROMANIA. from Reversible Ploughs Product line

  • Optim - Model 110/4 - Reversible Ploughs

    The range of OPTIM reversible ploughs is designed to optimize the operation of plowing, allowing the decrease of approximately 30% of the equipment maintenance costs and a longer period of payback in terms of increased working efficiency.

    By Mecanica Ceahlau S.A based in Piatra, ROMANIA. from Reversible Ploughs Product line

  • PEGAS - Reversible Ploughs

    The plough PEGAS achieves operational depth of 35 cm. We offer ploughs with 3 to 9 bodies as the necessary power of the tractor is from 80 hp to 350 hp. Ploughs with up to 5 operational bodies are offered with direct attachment to the tractor. Their working depth is adjusted mechanically by moving the wheel through the support screw. Ploughs with ...

    By Autolink based in Yambol, BULGARIA. from Reversible Ploughs Product line

  • Model G22 - Snow Plough

    The G22 has a split plough blade and is designed with high performance, ease of operation and safety in mind. Its high snow clearance capacity makes it particularly suited for tractors with engine outputs of up to around 60 kW, municipal service vehicles, implement carriers and light trucks as well as wheel loaders weighing up to around 5 tons.

    By Zaugg Ag Eggiwil based in Eggiwil, SWITZERLAND. from Snow Plough Product line

  • Model G6 - Snow Plough

    The ZAUGG snow plough G6 is the smallest snow plough equipped with the ZAUGG trip edge system operating on two rubber-sprung elements. It is particularly notable for its simple and robust construction and is especially suited for use on narrow track tractors with engine outputs of up to around 40 kW, municipal service vehicles, skid-steer-loaders ...

    By Zaugg Ag Eggiwil based in Eggiwil, SWITZERLAND. from Snow Plough Product line

  • Mounted reversible - plough Juwel

    The Juwel plough generation combines safe use, easy operation and work quality in an entirely new model. Initially available with three to seven furrows, and a 140 mm box section frame, the Juwel 8 is suitable for medium to high HP tractors.

    By Show-Me Shortline based in Centralia, MONTANA (USA). from plough Juwel Product line

  • Agrolux - Model MT - Conventional Plough

    Conventional plough with hydr. auto-reset trip legs. Agrolux mounted conventional Ploughs with 3-5 furrows are designed with modern technical solutions and smart details. This gives a Plough for modern farmers who focus on professional farming, functional equipment and economical operation.

    By Agrolux based in Överum, SWEDEN. from Conventional Plough Product line

  • Model G8K - Snow Plough

    The G8K snow plough is equipped with the ZAUGG trip edge system operating on two rubber-sprung elements. Thanks to the plastic mouldboard and the split plough blade, this snow plough can be used with minimal wear and tear to the carrier vehicle. It is most commonly used on municipal service vehicles and 4-wheel drives.

    By Zaugg Ag Eggiwil based in Eggiwil, SWITZERLAND. from Snow Plough Product line

  • Ditta - Rotary Ploughs

    From this year to integrate our range of spading machines, which is already the largest on the market, we include a series of rotary plows for tractors of medium power. The choice to operate only on small powers is caused by the fact that the market is increasingly moving in this direction, and also all our competitors do not have available this ...

    By Ditta Selvatici Srl based in San Lazzaro di Savena (BO), ITALY. from Rotary Ploughs Product line

  • Wagner - Model XL - Breaker Ploughs

    The model „XL“ represents a performance improved variant of Model G“. It features the same share size like model G. The frame is reinforced and stabilized. The plough has additionally been equipped by a stronger hydraulic system (gear drive and pump) for the double spin roll. This allows the application of this device by more ...

    By Wagner Pflanzen-Technik GmbH based in Friedelsheim, GERMANY. from Breaker Ploughs Product line

  • Belt Ploughs

    Belt Ploughs are an important safety equipment for all conveyors. They are designed to prevent material from being caught between the return side of the belt and the pulley face. The Sandvik range of belt ploughs are self adjusting and are designed to operate efficiently with minimum maintenance. There are three types for normal conveyors, high ...

    By Sandvik Mining and Construction B.V based in Amsterdam, NETHERLANDS. from Belt Ploughs Product line

  • Model U040 series - Disc Ploughs

    Disc ploughsof U040 series have a modular construction, i.e. they have the same structural elements but only differ in the number of bodies - discs and the size of the frame. Mounted ploughs available in our offer include2-, 3-, and 4-discploughs with the working width of0.6 m, 0.9 m and 1.2 mrespectively. Disc ploughs are designed for ploughing ...

    By Bomet Sp. z o.o. s.k. based in Węgrów, POLAND. from Disc Ploughs Product line

  • Mounted Disc Plough

    The disc plough is designed to work in all types of soil for basic functions such as soil breaking, soil raising, soil turning and soil mixing                  It is used to open the new fields and to process the stony areas. It can be used easily at rocky and rooted areas. It is especially useful in hard and dry trashy land conditions and in ...

    By Brohawk Exports based in Mohali, INDIA.

  • Diamant - Model 11 - Semi Mounted Ploughs

    The Diamant 11 is LEMKEN’s answer to today’s large farms demanding implements that are easy to operate and offer high economy.

    By LEMKEN GmbH & Co. KG based in Alpen, GERMANY. from Semi Mounted Ploughs Product line

  • Boisselet - Vineyard Plough Shares

    Plantations earthed up mechanically (with a ridging tool) or naturally (as a result of farm machinery passing regularly) must undergo a delicate operation : UNEARTHING or PLOUGHING BACK.

    By Boisselet SAS based in Montagny-Les-Beaune, FRANCE. from Vineyard Plough Shares Product line

  • Agrolux - Model MS - Mounted Conventional Ploughs

    Agrolux mounted conventional Ploughs with 3-5 furrows are designed with modern technical solutions and  smart details. This gives a Plough for modern farmers who focus on professional farming. functional equipment and economical operation.

    By Agrolux based in Överum, SWEDEN. from Mounted Conventional Ploughs Product line

  • Boisselet - Model VL - Vineyard Plough Shares

    Plantations earthed up mechanically (with a ridging tool) or naturally (as a result of farm machinery passing regularly) must undergo a delicate operation : UNEARTHING or PLOUGHING BACK. Plough fitted with a mechanical feeler.

    By Boisselet SAS based in Montagny-Les-Beaune, FRANCE. from Vineyard Plough Shares Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you