plow Equipment in USA

  • 2 Bottom Plow

    Welded Cross Shaft Frame Support. 3 Point Hitch With Replaceable Cat. 1 Lift Arm Pins. Replaceable Shins, Shares And Moldboards. Shear Bolt Protection. Grade 5 Heat Treated And Plated Fasteners. Adjustable Width Of Cut ( Hill Side). Comes Assembled, Install A-Frame And Ready To Use. 25-40 Hp Recommended. Coulter Or Gauge Wheel With Ball Bearings ...

    By A & B Eagleline Equipment, Inc. based in Sweetwater, TENNESSEE (USA). from Plows Product line

  • Vermeer - Model LM42 - Plow/Trencher with Optional Attachments

    Built for high maneuverability and easy operation, the LM42 tackles tough jobs with a powerful 42 hp/31 kW Deutz engine. This workhorse includes plow centering springs, a servo-controlled ground drive pump and safety features such as insulated controls and an operator-presence system.  The LM42 also boasts an extremely narrow profile that ...

    By Vermeer based in Pella, IOWA (USA). from Plows Product line

  • Model 3BP14 and 3BP16 - Three Bottom Plow

    2″ square tube rear strut. Welded cross shaft frame support. 3 point hitch with replaceable cat. 1 lift arm pins. Replaceable shins, shares and moldboards. Shear bolt protection. Grade 5 heat treated and plated frasteners. Adjustable width of cut (hill side). Comes assembled, install a-frame and ready to use. 35-50 hp recommended. Coulter or ...

    By A & B Eagleline Equipment, Inc. based in Sweetwater, TENNESSEE (USA). from Plows Product line

  • Vermeer - Model PTX40 - Plow/Trencher

    The walk-beside, center-articulated PTX40 plow/trencher is designed for installing fiber optic, electrical, gas and irrigation services and meets the needs of underground utility contractors, municipalities and landscaping professionals. Powered by a 46.8 hp (34.9 kW) Kubota liquid-cooled gasoline engine, the PTX40 provides maneuverability, ...

    By Vermeer based in Pella, IOWA (USA). from Plows Product line

  • Vermeer - Model RTX450 - Ride-On Tractor

    With the addition of the RTX450 to the RTX lineup, contractors can choose from a full Vermeer lineup of quad track units to help them maximize their productivity in adverse conditions. The RTX450 is offered in three configurations: the standard duty axle outfitted with a 26” (66 cm) tire option or the heavy duty axle 29” (73.7 cm) tire ...

    By Vermeer based in Pella, IOWA (USA). from Plows Product line

  • 1 Bottom Plow

    3 point hitch with replaceable cat. 1 lift arm pins . Replaceable shins, shares, and moldboards. Shear bolt protection. Grade 5 heat treated and plated fasteners. Adjustable width of cut ( hill side). Comes assembled, install a- frame and ready to use. 15-30 hp recommended. Coulter or gauge wheel with ball bearings optional

    By A & B Eagleline Equipment, Inc. based in Sweetwater, TENNESSEE (USA). from Plows Product line

  • Plowboy - 3-point Hitch Snowplow

    The Plowboy is a 3-point hitch snowplow that attaches to “The Farmboy” on the front of your UTV.  This setup has been designed to be used on Kubota RTVs.  The Farmboy provides 800 lbs. of hydraulic down pressure, making the Plowboy perfect for back dragging or clearing out areas if front of doors and garages.  ...

    By UTV Hitch Works based in Maineville, OHIO (USA). from Plows Product line

  • Model 1BP12CT - 1 Bottom Compact Tractor Plow

    Available with 12″ bottom. 3 point hitch with replaceable cat.1 lift arm pins. Replaceable shins, shares and moldboards. Shear bolt protection.Grade 5 heat treated and plated fasterners. Adjustable width of cut (hill side). Comes assembled, install a-frame and ready to use. 15-25 hp recommended. Gauge wheel with ball bearings optional

    By A & B Eagleline Equipment, Inc. based in Sweetwater, TENNESSEE (USA). from Plows Product line

  • POWER PLOW - Adjustable-Wing Snow Plow

    At the touch of a button, the BLIZZARD POWER PLOW® snow plow hydraulically expands its moldboard width. Independently controlled wings transform to perfectly match every condition, delivering time-saving performance at every jobsite.

    By Blizzard Plows based in Milwaukee, WISCONSIN (USA).

  • Model Ultra FastTach - Plows

    Never leave the cab again to install or remove side plates!

    By SnowWolf based in Burnsville, MINNESOTA (USA).

  • Stealth - Model ZD 3pt - Plows

    2011 7' Stealth ZD 3pt, includes proportional valve, 4' boot , and Gps Arm.  Used approx 300,000 ft.

    By Soil-Max based in Brazil, INDIANA (USA).

  • Sno-Way - Plows

    Sno-Way, the leader in designing small plows with a big appetite for snow does it again. We have designed a trip edge straight plow for the UTV market. This fully hydraulic 6 foot straight plow has been tested and proven to meet the unique challenges of the UTV. Our plow mount system makes putting on your plow or taking it off a real snap, without ...

    By Major League Power Equipment based in East Setauket , NEW YORK (USA).

  • Model DT-130C - High-Performance Track-Mounted Cable Plow

    General: Engine / hp: CAT 3046 Turbo / 120 hp. Length: 28' 5'. Width: 94'. Height: 109'. Fuel Capacity: 48.6 gal. Hydraulic Oil Capacity: 5.7 gal. Drive System: Dual Path Hydrostatic.

    By Delta Equipment LLC. based in Lawrenceville, GEORGIA (US) (USA). from Cable Plow Product line

  • BOSS - Model DXT - Power-V Plows

    More than just right- or left-hand compatible, SmartTouch 2 offers additonal mounting options for ease-of-use. Only BOSS treats every plow with our exclusive SmartShield finish to deliver durable corrosion protection and a long-lasting, high-gloss shine.

    By BOSS Products based in Iron Mountain, MICHIGAN (USA). from V-Plows Product line

  • Model 12 - Mini Moldboard Plow

    This 12' mini moldboard plow has a powder coat paint finish. Used for sub compact tractors.

    By Howse Implement Company, Inc. based in East Laurel, MISSISSIPPI (USA). from Moldboard Plows Product line

  • Model 14 - 1 Bottom Moldboard Plow

    This 14' single bottom moldboard plow has a powder coated paint finish, heavy duty frame made of 1' X 4' steel bar, and has category 1 hitch with lift pins.

    By Howse Implement Company, Inc. based in East Laurel, MISSISSIPPI (USA). from Moldboard Plows Product line

  • Model 8200 - Furrow Switch Plow

    LMC Manufacturing specializes in switch plows available as either In Furrow or On Land for bi-directional plowing.  We offer a wide range of plows for all soiltypes and crop volume.The In Furrow models feature our exclusive Auto Leveling Bushing System, which insures level moldboard plowing positions across a wide range of working depths from ...

    By LMC, Inc. based in Carson, NEVADA (USA). from Switch Plows Product line

  • Heavy Duty On-Land - Disc

    Nammco Machine Shop designs & manufacturers Switch Plow products including 3 point deep breaking disc switches. ( Heavy Duty In-Furrow and the Heavy Duty On-Land ) and 3 point deep breaking switch shovel types. ( Heavy Duty In-Furrow and the Heavy Duty On-Land ).

    By Nammco based in Lubbock, TEXAS (USA). from Switch Plows Product line

  • Loader Backhoe Plow

    Dual Compression Spring Trip Provides Safety For Driver And Equipment.Moldboards 30” H x 10’ W Gives a 104” Cutting Path at 30°/All Moldboards 3/16” Rolled Plate Steel with Tapered 1/2 x 4” Plasma Cut Ribs and 4 x 4 x 5/8” Reinforced Bottom Angle/Heavy Duty Circle Pushframe 3 1/2 x 3 1/2 x 1/2” Rolled ...

    By Henke Manufacturing based in Leavenworth, KANSAS (USA). from Reversible Plows Product line

  • Industrial Folding V-Plow

    The Henke Folding V-Plow is a Heavy Duty, Multi-Directional dozer blade for wheel loaders and motor graders. Designed specifically to accept machine downpressure from wheel loader arms or Henke motor grader parallel lift groups.

    By Henke Manufacturing based in Leavenworth, KANSAS (USA). from Reversible Plows Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you