Only show results in Virginia? Ok

plow steel equipment

  • SnowEx - Regular-Duty Snow Plows

    For personal plowing or light-duty commercial snow plowing jobs using half-ton pick-ups, the SnowEx 7600RD and 8000RD are engineered to meet vehicle weight ratings and deliver excellent performance. Built with stronger and lighter high-strength steel, the units are ideal for tough conditions while putting less stress on your truck than heavier ...

    By SnowEx based in Madison Heights, MICHIGAN (USA). from Regular-Duty Snow Plows Product line

  • Arctic - Steel Plow Partner

    Increasing efficiency and saving time - on the back-end. Attached using a height adjustable 2' X 2' trailer hitch mount, the Arctic Plow Partner-S offers an independent power unit that is mounted to the plow lift frame. This means no sharing off the plow pump for pressure. Operated with a two button pendant control in the cab, the Arctic Plow ...

    By Arctic Snowplow based in London, ONTARIO (CANADA). from Steel Plow Partner Product line

  • Reversemaxx - Snow Plow

    Blade without pivot (no angle) with two hydraulic side wings. 180° multiple hydraulic side wing positions. Side wings made of 'Heavy duty' steel CHT400. 'Heavy duty' CHT400 steel multi-section mechanical trip edge ½’’ x 6’’ (Std). SOFT drive mechanical steel trip edge, 'Heavy duty' multi-section ½' x 6' ...

    By Metal Pless Inc. based in Plessisville, QUEBEC (CANADA). from Snow Plow Product line

  • Agrimaxx - Snow Plow

    Universal subframe exclusive to Metal Pless. Double action hydraulics ‘‘Pression Maxx‘‘ exclusive to Metal Pless. 180° multiple hydraulic side wing positions. Side wings made of 'Heavy duty' steel CHT400. HD CHT400 steel multi-section mechanical trip edge ½’’ x 6’’ (Std). SOFT drive ...

    By Metal Pless Inc. based in Plessisville, QUEBEC (CANADA). from Snow Plow Product line

  • Truckmaxx - Snow Plow

    SOFT drive multi-section mechanical steel trip edge 'Heavy duty' CHT400 ¾'' x 6'' (HD). Mobile steel trip edge following the imperfection of roads, exclusive Metal Pless system, reduces up to 50% the use of salt and abrasives (LE). Carbide cutting edge on main mouldboard only (LE). Adjustable crossover relief valve for hydraulic protection ...

    By Metal Pless Inc. based in Plessisville, QUEBEC (CANADA). from Snow Plow Product line

  • Model PH50B - Hoss Plow

    Plows like a mule without the kick!! Maxim’s Plow Hoss is a one wheel garden cultivator with a selection of plows - does everything a mule and plow used to do only faster. With all steel construction and simplicity of maintenance and operation, count on years of weed control.  Additional accessories are available. This one wheel garden ...

    By Maxim Manufacturing Corporation based in Rogers, MISSISSIPPI (USA). from Hoss Plow Product line

  • Liveboxx - Snow Plow

    'LiveEdge' soft drive mechanical steel trip edge heavy duty multi-section 6' x ¾' x 24'. Mobile steel trip edge following the imperfection of roads, exclusive Metal Pless system, reduces up to 50% the use of salt and abrasives. Carbide cutting edge on main mouldboard only. Bolt-on fixed side wings. Wings have self-leveling abrasion shoes. ...

    By Metal Pless Inc. based in Plessisville, QUEBEC (CANADA). from Snow Plow Product line

  • John Deere - Model 2410 - Chisel Plow

    The John Deere 2410 Chisel Plow has been field-proven to provide consistent residue management for years. And it’s as reliable as it is productive. The robust frame of the 2410 delivers added strength for more aggressive performance. Heavy-duty 4x4-inch box-beam-steel cross members give the 2410 plenty of backbone.

    By John Deere based in Moline, ILLINOIS (USA).

  • Model 29R SERIES - Commercial Plow

    The 29R stands out from the crowd with the greatest possible snow moving flexibility and capacity for a plow mounted to a ¾ ton truck. No more machine limitations! The 29R uses the 29HD series commercial plow platform and has all the desirable characteristics of an extreme-duty plow: high-strength steel moldboard, fast and responsive ...

    By North Country Marketing Inc. based in West Fargo, NORTH DAKOTA (USA).

  • Avalanche - Straight Trip Edge Plow

    Multipositional, hydraulic powered straight plow with steel trip edge.  Available in 35' and 48' heights. Double walled moldboard with continuous welds throughout. Large hydraulic cylinders have forged clevis and 1.5' shafts with double plating. Torsion spring-loaded steel trip edge. Wear resistant curb guides on plow edges. Sizes from 5ft to ...

    By Avalanche Plow based in Oakville, ONTARIO (CANADA). from Straight Trip Edge Plow Product line

  • Ecotech - Model GDC30-DF-CA - Plows with Closed Top

    Our GDC-30 series plows with a trip system are flawlessly welded, perfectly designed for the mid sized tractor and powder coated to resist rust and maintain rollover of snow. The independent cutting edge allows each section of the plow to trip without affecting the rest of the frame. This series has a 30’’ high moldboard made of 10 ga ...

    By Cotech Inc. based in St-√Čloi, QUEBEC (CANADA). from Plows with Closed Top Product line

  • Prestovac - Plow Pressure Reactors

    The Prestovac Reactor incorporates the Mechanically Fluidized Mixing Action inside a vessel that can be operated under pressure as well as vacuum. The jacketed surfaces allow for heat to be efficiently applied to the material inside, promoting gas phase or liquid phase reactions to occur. After the reaction has occurred, excess reactants can be ...

    By Processall based in Mason, OHIO (USA). from Plow Pressure Reactors Product line

  • Model 28 - Chisels for Chisel Plows

    These chisels are manufactured from high grade hardened steel and designed to fit a wide variety of chisel plow machines. Chisel plows are most common with 1/2” holes on 2-1/4” centers although older International Harvester machines have 2-1/2” centers. Most have fifty degree shank bars. Nichols chisels are hot forged with ...

    By Nichols Tillage Tools, Inc. based in Sterling, COLORADO (USA). from Chisels for Chisel Plows Product line

  • Knowles - Model 579-5, 579-7 and 579-9 - Coulter Chisel Plows

    This high quality chisel plow is made of solid plate and channel steel. Heavy draw bar is adjustable to various heights. Individual spring mounting of coulters prevents damage when striking rocks and other solid objects. 20' diameter coulter blades cut up stalks and stubble and improve the work done by the 4' twisted shovels. 31' spring cushioned ...

    By Knowles Manufacturing Co Inc. based in Manitowoc, WISCONSIN (USA). from Coulter Chisel Plows Product line

  • Silt Fence - Rotary Offset Plow

    Cat. I and II 3 point hookup pins are standard equipment on the dedicated 3 point hitch attachment. 90 Degree Rear Pivot Swing – The rear pivot can swing 90 degrees either side of center. The rear pivot design provides the tightest turning radius available. Massive 2″ x 8″ pivot pins ensure years of dependable service. 90 Degree ...

    By Silt Fence Plow, Inc. based in Pleasantville, IOWA (USA).

  • Loader Backhoe Plow

    Dual Compression Spring Trip Provides Safety For Driver And Equipment.Moldboards 30” H x 10’ W Gives a 104” Cutting Path at 30°/All Moldboards 3/16” Rolled Plate Steel with Tapered 1/2 x 4” Plasma Cut Ribs and 4 x 4 x 5/8” Reinforced Bottom Angle/Heavy Duty Circle Pushframe 3 1/2 x 3 1/2 x 1/2” Rolled ...

    By Henke Manufacturing based in Leavenworth, KANSAS (USA). from Loader Backhoe Plow Product line

  • Avalanche - Model BHA(T)200 Series - Backhoe Pushers/Box Plows

    BHA(T)200 series - Back hoe model snow pusher/box plow, 36' tall. Available with either a high-grade rubber cutting edge or steel trip edge. Fixed solid steel plate bucket receiver. Standard abrasion resistant wear shoes.  Scroll down models list to view sizes available.  (BHA200-XX denotes rubber edge models, BHAT200-XX denotes steel ...

    By Avalanche Plow based in Oakville, ONTARIO (CANADA). from Backhoe Pushers/Box Plows Product line

  • Avalanche - Model LDA(T)200 Series - Snow Pusher/Box Plow

    LDA(T)200 series - Loader model snow pusher/box plow, 52' tall. Available with either a high-grade rubber cutting edge or steel trip edge. Fixed solid steel plate bucket receiver or hydraulic quick coupler options. Double side braces. Standard abrasion resistant wear shoes. Scroll down models list to view sizes available.  (LDA200-XX denotes ...

    By Avalanche Plow based in Oakville, ONTARIO (CANADA). from Snow Pusher/Box Plow Product line

  • Model 14 - 1 Bottom Moldboard Plow

    This 14' single bottom moldboard plow has a powder coated paint finish, heavy duty frame made of 1' X 4' steel bar, and has category 1 hitch with lift pins.

    By Howse Implement Company, Inc. based in East Laurel, MISSISSIPPI (USA). from 1 Bottom Moldboard Plow Product line

  • Model 16 - 2 Bottom Moldboard Plow

    This 16' double bottom moldboard plow has a powder coated paint finish, heavy duty frame made of 1' X 4' steel bar, and has category 1 hitch with lift pins.

    By Howse Implement Company, Inc. based in East Laurel, MISSISSIPPI (USA). from 2 Bottom Moldboard Plow Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you