Only show results available in Virginia? Ok

Plug Planter equipment

  • Model S - Plug Planter

    The B&L PlugPlanter S models offer fast accurate planting, quick change-over and CNC operating system for one of the easiest, quickest setups available.  Quick-change grippers for easily switching plug size and push-up pins to ensure soft or young plugs are extracted and planted without damage. The PlugPlanter gives you flexibility to use ...

    By Bouldin Corporation based in Morrison, TENNESSEE (USA). from Plug Planter Product line

  • RJ - Plug Planter

    RJ Equipment delivers the flexibility you need to tailor your planting system to your fields, crops and harvesting requirements. Make the most of every minute with RJ’s 6-cup carousel with the deep square chambers to ensure a quick, accurate release every time. Our proven planting units and choice of frames allows configurations for planting ...

    By RJ Equipment based in Blenheim, ONTARIO (CANADA).

  • Ferrari - Model F-MAX - Trans Planter

    The FERRARI transplanter model F-MAX is suitable for planting a wide variety of vegetables: tomatoes, cabbages, broccoli, peppers, celery, tobacco and many others. This carousel machine can be fed with plugs of different shapes (pyramid, cylinder, cone and, in some cases, square blocks). The transplanter carousel is turning in clockmotion ...

    By Ferrari Costruzioni Meccaniche based in Guidizzolo (MN), ITALY. from Tray Planter Product line

  • Ferrari - Model FX - Transplanter

    The FERRARI FX transplanter is a machine equipped with a rotary carousel suitable for planting vegetables in cylindrical, conical and pyramidal plugs. One of the most interesting features of this transplanter is the minimum row distance achievable: 25 cm (9.8') which allows the user to plant high density vegetables like lettuce and radicchio, ...

    By Ferrari Costruzioni Meccaniche based in Guidizzolo (MN), ITALY. from Tray Planter Product line

  • Multipla - Transplanter

    The FERRARI MULTIPLA transplanter is a carousel machine suitable for planting vegetables in plugs of different shapes (pyramid, cylinder, cone, ...). This machine is suitable for a large variety of vegetables: tomato, cabbage, broccoli, celery, lettuce and onions are the most common. Every MULTIPLA planting unit is equipped with two independent ...

    By Ferrari Costruzioni Meccaniche based in Guidizzolo (MN), ITALY. from Tray Planter Product line

  • Model 33 6000 - Direct Drive Peat Pot Planter

    The Model 33 6000 transplants up to 3' round or square peat pots or large cells as fast as 60 plants per minute. The 12 pocket chain allows for fast and effective plant placement and a wide variety of plant spacings.

    By Mechanical Transplanter Company based in Holland, MICHIGAN (USA). from Peat Pot Planter Product line

  • ISO - Model 2500 - Cutting Planter

    The ISO Cutting Planter 2500 is the last generation automatic cutting planter by the ISO Group. Like its bigger brother, the ISO Cutting Planter 4000, the machine automates the heavy monotonous manual work of planting cuttings. In the process, every cutting is pushed down to the same depth giving the planting perfect uniformity as a result. Thanks ...

    By ISO Group Agri Systems BV based in Gameren, NETHERLANDS. from Machines Product line

  • ISO Graft - Model 1100 - Cutting Planter

    Maintaining consistently high quality grafted plants increases reliability of delivery and reduces failure costs. The ISO Graft 1100 is the ideal grafting solution if there is not much automation in the cultivation process as yet. As a new relative of the ISO Graft 1200, the ISO Graft 1100 offers the same advantages with the important difference ...

    By ISO Group Agri Systems BV based in Gameren, NETHERLANDS. from Machines Product line

  • vSet Select - Multi-Hybrid Planter

    No more missed yield potential. Multi-hybrid planting is here. You aim to maximize yield by planting the hybrid that will do the best, on average, across the whole field. But yield environments often change in the same field, calling for different hybrids in different areas. You've had to make compromises, but not anymore. With the radically new ...

    By Precision Planting, Inc. based in Tremont, ILLINOIS (USA). from Mechanical Products Product line

  • Row Crop Planter

    SureFire fertilizer systems are custom designed to meet your application needs and are complete with everything you need so you can get planting faster and easier than ever before.  Whether you have a John Deere, Case, Kinze, or any other type of planter, SureFire has developed kits to custom fit your particular setup. SureFire Ag systems are ...

    By SureFire AG Systems, Inc. based in Atwood, KANSAS (USA).

  • Model 900 - Plastic Mulch Transplanters

    The Model 900 Mulch Transplanter is designed to set peat pots, cell type plants, and Jiffy 7's, among others, into plastic mulch. The Model 900 accurately pierces the plastic, spaces, waters and packs the plants better than planters of similar type.

    By Mechanical Transplanter Company based in Holland, MICHIGAN (USA). from Plastic Mulch Transplanters Product line

  • Model Legend ISOBUS - Air Drill Rate & Blockage Monitor

    Applying too much seed or too little seed can be a costly mistake. Knowing the seed population is something corn and soybean planter operators have enjoyed for years. Now, air drill operators seeding small grains (or large!) can benefit from this information. Even a single plugged run will justify investing in THE LEGEND. This year, your ...

    By Agtron Enterprises Inc. based in Saskatoon, SASKATCHEWAN (CANADA).

  • Gardena - Model M - Start Set Flower Pots Automatic

    The GARDENA Micro-Drip-System Starter Set Plant Pots M automatic is used for the care-free and water-saving irrigation of 7 plant pots and 3 planters on balconies and patios. The pressure-reducing Master Unit is connected to the tap with the aid of a hose. The plant pots are accurately and individually watered via the pipe system using Drip Heads. ...

    By Gardena based in Ulm, GERMANY. from Water Management - Micro-Drip System Product line

  • Model One - Rotary Transplanter

    For planting greenhouse tray plug plants, our rotary planting unit is number one in its field. That’s why we call it the Rotary One. With only one operator, this efficient machine will plant more than 60 plants per minute. After an initial setting is made to fit your desired depth and plant spacing, plants are dropped into the rotating cups ...

    By Holland Transplanter Co. based in Holland, MICHIGAN (USA). from Other Products Product line

  • NUTRI-JECTOR - High Speed Manure Injection System

    Injection protects valuable Nitrogen from burning off and places it right where your crop needs it…in the root zone. You deliver more nutrients while making less odor and the new Jamesway NUTRI-JECTOR™ lets you do this at higher speed and lower horsepower than ever. The adjustable coulter opener in front of the injector shank cuts ...

    By Jamesway Farm Equipment based in St-Francois-Xavier, QUEBEC (CANADA). from Jameswa Manure Injection Systems Product line

  • McFarlane - Model HDL / WDL SERIES - Bar Harrow

    McFarlane’s 6+6 Bar Harrow is one of the most versatile tillage tools available anywhere. The 6+6 lessens the possibility of plugging, leaving residue where it belongs — on the field, not in your equipment. Its multiple bars and close-tooth spacing provide excellent leveling and superior soil stirring action. The ...

    By SISCO, Inc. based in Greenville, OHIO (USA).

  • McFarlane - Model 6×6 - Bar Harrow

    McFarlane’s 6+6 Bar Harrow is one of the most versatile tillage tools available anywhere. The 6+6 lessens the possibility of plugging, leaving residue where it belongs — on the field, not in your equipment. Its multiple bars and close-tooth spacing provide excellent leveling and superior soil stirring action. The ...

    By McFarlane Mfg. Co. Inc. based in Sauk City, WISCONSIN (USA). from Harrows Product line

  • Ag Shield - Hay Crops Land Rollers

    Rolling hay fields soft conditions will smooth out clumps allowing higher field speeds. Rollers punch small rocks into the sod, letting hay cutter bars to get closer to the base of plants. This maximizes yields and reduces cutter bar damage. Hay growers also see less damage to cutter bars, crimping rolls and baler knives.

    By Stankee Company, Inc. based in Grand Junction, IOWA (USA). from Land Rollers Product line

  • AG-Shield - Land Roller

    Rollers provide a smooth and level surface for improved seed-to-soil contact, better weed control, and reduced moisture loss. Germination of canola, forages and other small seeds is significantly improved. The firm smooth fields guarantee faster, easier harvesting for short crops like chickpeas, peas, lentils and soybeans. Because the land roller ...

    By AG Shield Manufacturing based in Benito, MANITOBA (CANADA).

  • Model The Legend - Rate & Blockage Monitor

    Introducing THE LEGEND Rate & Blockage Monitor for sectional control air drills! With built-in interfaces for ISOBUS and Wifi, THE LEGEND S.A. (Section Aware) alerts the operator to rate or blockage problems, but only on active sections.

    By Agtron Enterprises Inc. based in Saskatoon, SASKATCHEWAN (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you