potato-fibre equipment in USA

  • Fibre Drums

    New and used 55 gallon fibre drums alway in stock. Various sizes available at times. New 10 and 20 gallon square fibre drums with slip top lids. New 20 gallon lock rim fibre drum with snap ring.

    By Container Distributors Inc. based in Venice, ILLINOIS (USA).

  • Monofilament Fibre

    Our extrusion allows us to produce PVDC (Saran) - monofilament - products from a diameter of 0.17 mm. We are one of the few companies in the world who are experts in processing this synthetic material.

    By Saati S.p.A. Office in Fountain Inn, SOUTH CAROLINA (USA).

  • Fibertex - Fibre Extrusion

    PP staple fibres are produced for own consumption using short spinning technology. Fibres can be produced in various colours in dtex range from 1-10 dtex.  Special polymer grades are used for fibre spinning to tailor make the final end properties of our nonwovens.

    By Fibertex Nonwovens A/S Office in Ingleside, ILLINOIS (USA).

  • Wirand - Fibres for Concrete

    Wirand is our steel fibre reinforcement for concrete. It acts directly on the concrete matrix, improving its mechanical properties; ductility, structural strength, toughness and preventing cracking. Steel fibres enable the redistribution of tensile forces, increasing the flexibility of the concrete.

    By Officine Maccaferri S.p.A. Distributor in FLORIDA (USA).

  • Potato Halver

    The Potato Halver cuts too-long potatoes in half crosswise, so that french fry processors can simply and efficiently increase yield, achieve length specifications, and prevent product length-related packaging problems. The potato halver achieves consistent, accurate handling at capacities up to 360 potatoes per minute.

    By Key Technology based in Walla Walla, WASHINGTON (USA). from Potato Halver Product line

  • Milestone - Potato Treater

    A uniform, blocky and consistent sized seed piece is extremely important, however, just as important is properly treating that seed piece before it is planted.  Since 1978 Milestone has been designing, building, and perfecting the Barrel Seed Applicator to complement our Potato Seed Cutters or for independent operation.  Designed for ...

    By Milestone based in Blackfoot, IDAHO (USA). from Potato Treater Product line

  • Model AR 4BX - Potato Harvester

    The Ploeger self-propelled 3 and 4 row tanker harvester is designed with a complete focus on customer demand: increasing the net yield by achieving maximum quality of the harvested product. With the large sieving area and various cleaning units the Ploeger tanker harvester has unmatched capacity. Low conveying speeds in combination with the ...

    By Ploeger Machines bv Distributor in Byron, NEW YORK (USA). from Potato Harvester Product line

  • Model 9500 Series - Potato Planter

    The Double L 9500 Series Planter improves in-field efficiency in a variety of ways. First, an industry-leading tank capacity means growers limit refill time and decrease stops per acre. Second, precision, gravity-fed planting units manufactured by Underhaug, have fewer moving parts which means less daily maintenance, yearly wear, and overall down ...

    By Double L based in Heyburn, IDAHO (USA). from Potato Planter Product line

  • Model 953 - Potato Harvester

    Model : 953. Number of Rows: 4. Height: 10 ft. 9 in. (3.28 m). Width (transport): 14 ft. (4.27 m). Length: 28 ft. 7 in. (8.71 m). Weight: 23,000 lb. (10.43 MT). Tongue Weight: 3,400 lb. (1.54 MT). Horsepower Requirement: 175 hp. Rear Cross Chain Width: 36 in. (91.44 cm). Devine Chain Width: 69 in. (175 cm). Side Elevator Chain Width: 42 in. ...

    By Double L based in Heyburn, IDAHO (USA). from Potato Harvester Product line

  • Model GL 32 E - Potato Planter

    The GL 32 E with 500 kg hopper is available for row width 75 or 90 cm. Ideal for smaller farms to start with, easy to operate and low-cost investment. Ideal for accurate and trouble-free planting. The furrow opener on a parallelogram for exact depth control are available as an option. Depending on the conditions ridging bodies behind covering ...

    By Grimme Landmaschinenfabrik GmbH & Co. KG Distributor in Blackfoot, IDAHO (USA). from Potato Planter Product line

  • Checchi Magli - Model SP100 - Potato Digger

    In the Checchi & Magli potato digger range, it is the big sister. A single-row machine, available with a 3-point linkage for both conventional tractors and narrow track ones. It is equipped with a fixed ploughshare, 2 sieves that alternately vibrate to clean the potatoes, side unloading and extremely robust. It is particularly suitable for ...

    By Checchi e Magli Srl Office in Lehi, UTAH (USA). from Potato Digger Product line

  • Model 900 Series - Potato Collectors

    The Double L 900 Series Collectors offer high capacity cleaning and handling solutions to meet the configuration and handling needs of the growers. Configuration options such as the hopper roll table, inline sizer, and a new fan blower system give growers greater cleaning ability while reducing the need for additional manual labor. The ...

    By Double L based in Heyburn, IDAHO (USA). from Potato Collectors Product line

  • Checchi Magli - Model SP 50V - Potato Digger

    In the Checchi & Magli potato digger range it is the little sister of the SP100. A single-row machine, available with a 3-point linkage for both conventional tractors and narrow track ones with rear unloading.  The vibrating ploughshare conveys the potatoes or generally the product that needs digging onto the sieve, making the SP50V ...

    By Checchi e Magli Srl Office in Lehi, UTAH (USA). from Potato Digger Product line

  • Model 973 - Potato Harvester

    Model : 973. Number of Rows: 4. Height: 10 ft. 9 in. (3.28 m). Width (transport): 14 ft. (4.27 m). Length: 33 ft. 0 in. (10.06 m). Weight: 28,000 lb. (12.70 MT). Tongue Weight: 5,000 lb. (2.27 MT). Horsepower Requirement: 225 hp. Rear Cross Chain Width: 42 in. (106.68 cm). Devine Chain Width: 69 in. (175 cm). Side Elevator Chain Width: 42 in. ...

    By Double L based in Heyburn, IDAHO (USA). from Potato Harvester Product line

  • Grimme - Model SE 75-20 - Potato Harvester

    Grimme single row Potato Harvester SE 75-20 with 2-tonne bunker capacity. A Grimme machine with innovative engineering features, covered by international patents, which gives higher output, more effective separation and even gentler crop handling.

    By Grimme Landmaschinenfabrik GmbH & Co. KG Distributor in Blackfoot, IDAHO (USA).

  • Potato Storage

    Pioneers in North America stored their potatoes in root cellars near their houses. Today, commercial potato growers store their crops in huge buildings built especially for storing potatoes. Potatoes in storage are piled up to 20 feet deep. Specialized air circulation systems keep the temperature and humidity as uniform as possible in the pile.

    By Washivore based in Olympia, WASHINGTON (USA).

  • Airhead - Potato Harvester

    The Lenco Self Propelled “Airhead” Potato Harvester is revolutionizing the way potatoes are harvested. Advanced Farm Equipment’s on-going commitment to research and development contributes to our reputation as an innovative, forward-thinking organization. We’ve listened to the needs of our customers and integrated their ...

    By Advanced Farm Equipment LLC based in Vestaburg, MICHIGAN (USA).

  • AstroTubers - Potato Minitubers

    AstroTubers (potato minitubers) are tubers produced by one or two node stem cuttings derived from established tissue culture plantlets, Stem cuttings are made from the tissue culture plantlets after a growth period of 3 to 4 weeks in a phytotron. Repeated stem cuttings can be made from the established plantlets at approximately 3 week intervals. ...

    By CETS LLC based in Sussex, WISCONSIN (USA).

  • TFP - Metal Coated Fibres

    TFP offer the unique capability to produce our metal coated fibres 'in-house' at our subsidiaries Electro Fiber Technologies LLC (EFT) and Metal Coated Fibers Inc (MCF). Metal plating can be carried out using either a electroless plating or an electroplating method depending on the requirements. The process offers the capability to ...

    By Technical Fibre Products Ltd (TFP) Office in Schenectady, NEW YORK (USA). from Metal Coated Fibres Product line

  • FibroMac - Polypropylene Fibres for Concrete

    Maccaferri FibroMac polypropylene fibres are composed of extremely fine polymer filaments produced by an extrusion process. Synthetic fibres do not bring structural benefits to the concrete, but bring other advantages. They are primarily used to protect the integrity of the concrete when it is subjected to high temperatures and direct heat, ...

    By Officine Maccaferri S.p.A. Distributor in FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you