Only show results in Virginia? Ok

Pruning Wood equipment

  • MAGIC - Model 4 - Shears

    MAGIC 4: the first, the smoothest, the most powerful shears in our range. Thanks to their double piston they cut without any backlash up to 35 mm-wide branches. Great for hard wood.

    By Paterlini S.r.l based in San Martino in Rio (RE), ITALY. from Pruning Product line

  • Brushmaster - Shredder Chipper for tree prunings, leaves, dead plants, and branches

    Brushmaster shredder chipper is the baby of the shredders.  It is ideal for a garden of up to half an acre in size. It's quick and efficient, small enough to be stored in a shed and moved around by one person.

    By GreenShredder based in UNITED KINGDOM. from Wood Shredder Chippers Product line

  • Blue Bird - Model CS 250 - Chainsaws

    The Blue Bird range of chainsaws includes the suitablesolution for every problem: pruning, felling and delimbing.The traditional line ranges from 35 to 58 cc, with bar up to 50 cm. The Walbro carburetor and the Oregon bar and chain guarantee reliability and great performance.

    By Blue Bird Industries Fabbrica Motori S.R.L based in Zanè, ITALY. from Woods - Chainsaws Product line

  • Felco - Model 70 - Pneumatic Pruning Shear

    Recommended for all types of cutting, particularly where the wood is very hard. The operating power for the pruning shear is supplied by an air-compressor.

    By Felco SA based in Les Geneveys-sur-Coffrane, SWITZERLAND. from Power Tools Product line

  • JP Carlton - Model 1260 Series - Wood Chipper

    The J.P. Carlton 1260 Wood Chipper is an extremely versatile machine. The 1260 is the perfect answer for trimming and pruning crews who aren't doing the large takedowns, or for crews who load or split their big wood. With its 12' x 6' throat opening, dual top and bottom feed rollers, and high torque feed motors, the J.P. Carlton 1260 will out ...

    By J.P. Carlton Company based in Spartanburg, SOUTH CAROLINA (USA). from Wood Chippers Product line

  • DR Power - Model 11.5 - Self-Feeding Manual Start Wood Chipper

    The 11.5 is our smallest dedicated chipper, but it packs a serious punch. DR Self-Feeding design allows it to tear through branches up to 3.75” in diameter, and do it continuously...without bogging down the way underpowered “big box” machines do. A dedicated self-feeding chipper that will power through branches up to 3.75' in ...

    By DR Power Equipment based in Vergennes, VERMONT (USA). from DR Power Wood Chippers Product line

  • FieldMaster - Wood Chipper Senior

    The FieldMaster Wood Chipper is a strong and reliable attachment. The 6' capacity is large enough to handle anything that an estate management function will require. Its spring loaded roller blade allows branches with foliage to be accommodated easily and reduces the chance of blockage. The hydraulic feed system is designed to avoid damage to the ...

    By FieldMaster Tractors Ltd based in Ammanford, UNITED KINGDOM. from Implements & Accessories Product line

  • Model T-77 - Wettable Powder

    A wettable powder concentrate of a beneficial aerial Trichoderma atroviride strain for protection of pruning wounds and diseases like Botrytis. T-77 can be sprayed and is effective against Botrytis on leaves, flowers and fruits. In the same way pruning wounds on grapevines and other fruit trees are protected against the entrance of pathogens.

    By Andermatt Biocontrol AG based in Grossdietwil, SWITZERLAND. from Bio-Fungicides Product line

  • Model FTP - Mulcher

    FTP NEW mulcher built with double shell, shaft and heavy hammers, supports steel reinforced, is suited for work on cutting grass and the pruning from 4 or 5 cm diameter.

    By FAUSTINI s.n.c. based in Ronco all’Adige (VR), ITALY. from Mulcher Product line

  • Sharpex - Long Cutter

    Cutting is done on pull stroke and not on push stroke. It gives very fast and technically correct cut. It cuts wood in a slant with a unique pull action. Thus retaining the natural growth option. Two- point blade lockReplaceable pruning blade2 Stage Fibre glass telescopic pole

    By Sharpex Engineering Works based in Ahmedabad, INDIA.

  • Model FTM - Mulcher

    FTM NEW mulcher built with single shell, shaft and average hammers, supports steel reinforced, is suited for work on cutting grass and pruning small and medium size.

    By FAUSTINI s.n.c. based in Ronco all’Adige (VR), ITALY. from Mulcher Product line

  • Model T Series 90 to 160 HP - Tractors With Rear Roller

    An important application for this tiller with rear roller is to bury wood chips by tilling 2 to 3 inches deep. The roller then slightly compacts and smooths out the orchard floor. The wood chips will decompose at a faster rate and the rolled out area is then in better condition for the harvesters. The University of California Cooperative Extension ...

    By Gearmore, Inc. based in Chino, CALIFORNIA (USA). from Tillers Product line

  • Model T305-RR - Tiller With Rear Roller

    An important application for this tiller with rear roller is to bury wood chips by tilling 2 to 3 inches deep. The roller then slightly compacts and smooths out the orchard floor. The wood chips will decompose at a faster rate and the rolled out area is then in better condition for the harvesters. The University of California Cooperative Extension ...

    By Gearmore, Inc. based in Chino, CALIFORNIA (USA). from Tillers Product line

  • Model T2 - Shredder Mulchers

    Even in the basic version, the T2 will be more than equal to the task of shredding weeds and pruning wood in vineyards and orchards. The T2 shredder/mulching machines is available with a fixed three point hitch or with a hydraulic offset mechanism operated from the driving position. The T2 can be used in combination with the D88 disc cutter or S92 ...

    By Gramegna s.r.l. based in Broni (PV), ITALY.

  • Dolmar - Model PS-35 - Gasoline Chain Saws

    With this model you are perfectly equipped for private use. Whether you prune trees or cut firewood - this handy chainsaw will convince you with its excellent starting behaviour, high safety standards and comprehensive comfort features. All at outstanding value for money.

    By Dolmar based in Buford, GEORGIA (US) (USA). from Gasoline Chain Saws Product line

  • Rotary Topper-Hedger-Skirters

    These agile, tractor-mount machines offer an efficient pruning solution for fruit and nut growers. The sweeping, clearing action of the rotary head is effective at cutting through thick or brushy wood in almonds, pistachios, prunes, oleanders, persimmons, citrus, stone fruits and more. We have several variants of this style of machine, each ...

    By Erick Nielsen Enterprises, Inc. based in Orland, CALIFORNIA (USA).

  • Model MR - Reversible Flail Mower

    Reversible flail mower, multipurpose, strong and professional suitable for big tractors (from 60 HP).This is a flail mower for the utmost heavy working conditions, such as the shredding of big pruning residues and the upkeep of wooded areas (up to 10/12 cm grinding diameter).Available with working widths 180 – 200 – 225 – 240 ...

    By BECCHIO & MANDRILE based in Savigliano, ITALY.

  • Model MS - Flail Mower

    Rear professional flail mower, strong and multipurpose, suitable for big tractors (from 55 to 100 HP). This is a shredder for the utmost heavy working conditions, such as the shredding of big pruning residues and the upkeep of wooded areas (up to 10 cm grinding diameter). Available with working widths 180 - 200 - 225 - 240 - 260 - 280 - 300 cm. ...

    By BECCHIO & MANDRILE based in Savigliano, ITALY.

  • Model PTH 400 - Drum Chipper

    This is our flagship model in the COMPACT range of Pezzolato drum chippers, both due to the number of units sold as well as due to the quality / price ratio that allows excellent production levels despite the machine being 'compact'. The particularly robust structure stands out because of the inlet mouth width which enables the passage of material ...

    By Pezzolato S.p.A. based in Envie Cuneo, ITALY. from Drum Chippers Product line

  • Model PTH 300 - Drum Chipper

    This is the smallest model in the COMPACT line of Pezzolato drum chippers. Both the inlet width, which allows the passage of material up to 500 x 300 mm, combined with the machine compactness, make it ideal for those who produce wood chips as fuel for domestic heating systems, for agricultural tourism, hotels, greenhouses, schools, or for those ...

    By Pezzolato S.p.A. based in Envie Cuneo, ITALY. from Drum Chippers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you