Only show results in Connecticut? Ok

reach mower equipment

  • AS Motor - Model AS 510 ProClip 2in1 4T A - Mulching Mower

    The AS 510 ProClip 2in1 4T A offers work rates reaching 2,100 m² per hour due to a high-performance Briggs & Stratton engine and a 51 cm cutting width. The Briggs & Stratton engine not only delivers up to 5.5 hp, its asymmetric arrangement also ensures excellent handling thanks to a balanced distribution of weight. A third crankshaft ...

    By AS-Motor Germany GmbH & Co KG based in Buehlertann, GERMANY. from Mulching Mower Product line

  • Diamond - Rear Swing Flail Mowers

    Diamond's Rear Swing Flail is ideal for road and irrigation ditch maintenance. Excelling in brush, rocks and debris where build-up occurs, like old fence lines, the Rear Swing Flail reaches and trims back roadside brush by utilizing a 90 degree vertical cut feature.

    By Diamond Mowers based in Sioux Falls, SOUTH DAKOTA (USA).

  • Model SWT-SA-650 - Side Mounted Unit

    Omplete outrigger steering from CAN-BUS System . Steering valves from the tractor (Danfoss Hydraulic), speed regulation of thy hydraulic cylinder easy adjustable with the board computer. Valves protected and located behing the tractor. Stable frame for the side mower mounted upon the tractor frame, High bottom clearance. Hydraulic power up to 125 ...

  • Maverick - Mid Mount Boom Mowers

    The Maverick stands alone when it comes to boom mowers. Reach high into trees, over the guardrails, down steep slopes, and around the waterways. Power through these tough mowing challenges with the ability to reach up to 30 feet. Swing wide, up to 180 degrees, mow in tight spaces within inches of the tires all by operating with a single one-touch ...

    By Alamo Group, Inc. based in Seguin, TEXAS (USA). from Mid Mount Boom Mowers Product line

  • Saber - Model 25 - Mid Mounted Boom Mowers

    With a reach of 25' 8', the Saber was designed as a heavy duty boom arm with your longer reach mowing needs in mind. This boom was built to provide strength, performance and stability needed on the long reach cuts that demand a steadier hand.With 4 interchangeable cutter heads to match any kind of mowing you want to do, the Saber 25 is the clear ...

    By Tiger Corporation based in Sioux Falls, SOUTH DAKOTA (USA). from Mid Mounted Boom Mowers Product line

  • VOLPE - Model 130 - Sideshift Flail Mower for Tractors

    Weight 250kg - For 25-45 HP tractors -Cutting width 130cm. The Volpe sideshift mower attaches to your tractor using universal three point linkage. It has been designed for use on most 25-45HP compact tractors e.g Kubota, Ford, McCormick, Iseki, Yanmar, Lamborghini......  The Volpe 130 is ideal for not only cutting grass, but also for ...

    By Deleks UK & I based in Dublin 2, IRELAND. from Sideshift Flail Mower for Tractors Product line

  • Model 3380 - 80 - Cut Articulating Mower

    The 3380 is built to meet the rotary demands that range from golf course use to heavy commercial applications. This unit is available with a 33 hp Kubota turbo diesel.* The 3380 offers a wide cut utilizing four 21” (533.4 mm) articulating rotary decks and features a 20” (508 mm) side reach to reduce hand mowing and trimming near ponds ...

    By Lastec Inc. based in Lizton, INDIANA (USA). from Cut Articulating Mower Product line

  • Noremat - Optima Reach Mowers

    Designed for intensive work rates, the Optima range is the first to feature the patented Visiobra concept which offers comfort and work security without precedent. Very highly regarded by regional and local councils, the Optima boom mower operates exceptionally well at all tasks (mowing, shredding, sawing etc). 'The operating standard for ...

    By Stocker-Crew based in Warners Bay, AUSTRALIA.

  • Lastec - Model 100EF - 100 - Out Front Cut Articulating Mower

    The Lastec 100EF combined with the Deere 1565 or 1580 offers levels of productivity and maneuverability never before seen with other Deere products. The deck also features more than 20' of side reach to eliminate costly hand mowing and string trimming because the deck overhang allows it to cut closer to pond banks, under trees, and along fence ...

    By Lastec UK Ltd based in Maidstone, UNITED KINGDOM. from Out Front Cut Articulating Mower Product line

  • Elkaer - Model HK1300-3 Termit - Hedge Cutter

    Mount the new Elkaer Termit HK1300-3 hedge cutter at a big lawn mower – e.g. a Stiga Park/Titan or Husqvarna TD26 – and get rid of unhealthy working positions. It is often seen that hedge cutting causes challenges both for the physics and the machine, but the Elkaer Termit makes it easy as never before. The HK1300-3 trimmer bar is very ...

    By Elkær Maskiner based in Ørbæk, DENMARK. from Hedge Cutter Product line

  • Power Blade

    Ideal for forestry work and overgrown hedges which are too heavy to be flailed. The clean cut provides excellent re growth. A triple bladed saw machine with 1.83m cutting width. Capable of cutting up to 250mm diameter material. Twin belt drives to each 700mm diameter sprung steel blade, cast iron hydraulic motor. Can be mounted to almost any ...

    By Protech Machinery Ltd based in Hartpury, UNITED KINGDOM. from Power Blade Product line

  • Max Holder - Model UNA 200 - Reach Arm Mower

    Basic machine with changeable implements with hydraulical drive . Workspace: left or right and in front of the vehicle. Inclusive electro-hydraulic control and hour meter. Basic machine incl. shift and electrical control panel.

    By Max Holder GmbH based in Metzingen, GERMANY. from Reach Arm Mower Product line

  • Ferri - Model T250A - Hydraulic Reach Mowers

    T320A and T320A are the Ferri Reach mower models designed for farmers, ranchers, hobby farmers landscape contractors and municipalities, when the use of a compact tractor is needed.

    By Ferri srl based in Tamara, ITALY. from Hydraulic Reach Mowers Product line

  • Evo - Model TPE500 - Hydraulic Reach Mowers

    The reach mowers of the TPE Evo series are capable of the most demanding contractor jobs. Especially those that would use the equipment between 400 to 500 hours per year in vegetation maintenance.

    By Ferri srl based in Tamara, ITALY. from Hydraulic Reach Mowers Product line

  • Samurai - Mid Mount Boom Mowers

    The Samurai Boom Mower is made to reach above and beyond. Ideal for municipal mowing over guardrails and barriers with an economical price to fit any budget.

    By Alamo Group, Inc. based in Seguin, TEXAS (USA). from Mid Mount Boom Mowers Product line

  • Spearhead - Model Excel 5 series (565) - Hedgecutters

    The 4.7m (15'4') reach Excel 474 Reach mower offers the easy to use parallel arm system and build quality at an affordable price. It has the reliable three point linkage mounting system for fast on/off attachment. It is compatible with 70-90hp tractors of 2500-3000kg before ballasting. Cast iron pumps and motors to give excellent reliability and ...

    By Farmhand Ltd based in Dublin 15, IRELAND.

  • Alamo - Rear Mount Boom Mower

    The Alamo Rear Mount Boom gets your mowing jobs done while keeping your tractor available for other applications. Made for roadside clearing and featuring a variety of lengths and cutting heads; grass, brush and tree limbs are conveniently within your reach.

    By Alamo Industrial based in Seguin, TEXAS (USA). from Rear Mount Boom Mower Product line

  • Fulgor - Two Segment Boom Mower

    Renowned for its robustness and reliability, the Fulgor range includes machines offering a horizontal reach of 5.2 m to 12 m. The extremely high standards applied to the selection of components mean that these brushcutters are of unrivalled quality, ensuring that they withstand the most challenging conditions. In particular, ...

    By Rousseau CS based in Neuville-sur-Saône Cedex, FRANCE. from Two Segment Boom Mower Product line

  • Bush Hog - Model RMB - Boom Mowers

    RMB1445-1, RMB1660-1, RMB1865-1 and the PT5 Powertrim-2. The ultimate in versatility, Bush Hog’s rugged, tractor-mounted boom mowers are designed to trim trees, brush or hedges and mow behind guardrails, over fences, down embankments and around ponds. With four models reaching 11 to 18-feet from the tractor centerline, there’s almost ...

    By Bush Hog - a member of the Alamo Group based in Selma, ALABAMA (USA). from Boom Mowers Product line

  • Model TM46 Trial - Hydraulic Reach Mowers

    The TM46 and TM56 Models are compact, reliable, heavy duty  reach mowers designed for farmers,  municipalities and landscape contractors.

    By Ferri srl based in Tamara, ITALY. from Hydraulic Reach Mowers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you