Root Crop Equipment
-
Manufactured by Easterby Trailers Ltdbased in UNITED KINGDOM
The Root Crop tipping trailers are built the same as the Monocoque but with a longer body and lower sides. This gives you a lower loading height and a higher tipping height, yet keeping the same cubic capacity, and avoiding excessive damage to the ...
-
Manufactured by HM Trailersbased in UNITED KINGDOM
rough terrain and the trailer. This reduces the high stress levels that are imposed on a chassis with a single mounting system, it also makes the trailers more stable when tipping by making it less likely to lift the draw bar. The root crop trailers have a narrower chassis with extra clearance for flotation tyres, but the wheel to wheel ...
-
Manufactured by Gurney Reeve & Co. Ltd.based in UNITED KINGDOM
Designed for Loaders and Telehandlers up to 3 tonne capacity. Handles most root crops – sugar beet, fodder beet etc. Can either be supplied c/w fingers as shown or c/w weld-on edge. Fingers will be supplied unless specified on ...
-
Manufactured by Herron Engineering Ltdbased in NORTHERN IRELAND
The H1 Grain Trailers with their strong monocoque body have been well tested over the years and have proved to be reliable and well balanced. All models are shot-blasted and finished with durable two-pack polyurethane paint. These trailers are constructed with lower sides for root crops, potatoes and carrots. They can also be ...
-
Manufactured by Broughan Engineering Ltd.based in IRELAND
The range of grain, silage and root crop trailers are available from 12 to 24 tonne tri-axle with 10 stud commercial axles on spring ...
-
Manufactured by Greentronicsbased in CANADA
The RiteDepth system provides automatic, accurate and consistent depth and distance control on root crop harvesters and vegetable flail mowers (toppers). The system works with one or two rugged sonar sensors mounted to read off the top of the row and connected to the share mounting frame. Signals from the sensors are interpreted by a ...
-
Manufactured by Greentronicsbased in CANADA
Conveyor height control on root crop and vegetable harvesters as well as on storage equipment, is still mostly a manual job for the operator. Operators must constantly watch the drop height and manually adjust the conveyor height to minimize the drop and so minimize bruise damage. This is fatiguing and stressful and sometimes hard to ...
-
Manufactured by Oxbobased in NETHERLANDS
Harvesting Potatoes Without Compromise Model Range: AR 3BX - AR 4BX The Ploeger self-propelled 3- or 4-row bunker harvester was designed focusing on the clients’ demands: harvesting potatoes without compromise. This machine exceeds in total sieving area: with the chassis on the outside of the sieving webs the flow of potatoes is free of obstacles, with no narrowing. Due to the variety of ...
-
Manufactured by Franz Hauer GmbH & Co KGbased in AUSTRIA
This pallet fork with rotation device is special implement for emptying boxes and containers. The tines are adjustable and can be fixed. The pallet frame width is 1300 mm and can be rotated 160° to the left and 160° to the right. Im combination with the universal box holder, boxes can be emptyed easily sidewards so that the box is not ...
-
Manufactured by Franz Hauer GmbH & Co KGbased in AUSTRIA
This special implement enables an efficient and careful transport of turnips. The beet bucket is design in a way that earth chunks can fall through between the tubes of the bucket. The beet buckets are available in widths of 1800 to 2400 mm with volumes from 1,10 to 1,5 ...
-
Manufactured by Herron Engineering Ltdbased in NORTHERN IRELAND
This technologically advanced and innovative range of Herron Grain Trailers, with a load capacity from 14 to 26 tonnes, has been designed and manufactured to an exceptionally high specification to meet the demands of harvesting. The H2 Grain Trailers are fitted with commercial axles, multi-stage single tipping ram for faster discharge, sprung drawbar, multi-leaf spring suspension, hydraulic ...
-
Manufactured by Wielton S.A.based in POLAND
The trailer is mainly intended for transporting root crops. The inside of the loading platform is smooth, which minimizes damage to agricultural products during loading and ...
-
Manufactured by US Small Farm Equipment Co.based in USA
Our undercutter or bed lifter was designed to give you an economical solution to digging your root vegetables. It works well for garlic or carrots or whatever root crop you’ve grown. Each undercutter is made custom to the width that is needed. Therefore, it takes some lead ...
-
Manufactured by Jones Engineeringbased in UNITED KINGDOM
The Jones Engineering Root Crop Chaser has been designed to be strong, tough and reliable whatever the conditions. Capable of carrying a payload of up to 12,000kgs whilst maintaining a light footprint. The Elevator will load into bulk trailers, with different cleaning modules that can be tailored to suit your conditions and ...
-
Manufactured by Edwards Farm Machinery Ltdbased in UNITED KINGDOM
The Edwards Farm Machinery Universal Haulm Pulveriser has been designed for professional growers of root crops. It is suitable for mounting to both the front and rear of the tractor. It’s heavy-duty design enables years of trouble free ...
-
Manufactured by Gregoire-Besson UK Ltdbased in UNITED KINGDOM
The Espresso is designed to produce a seedbed with a fine tilth for root crops. It is ideal on heavy land eg. clay and stony conditions. ...
-
Manufactured by Willsie Equipment Sales Incbased in CANADA
2 Row Automatic Root Crop / Potato Harvester is also available. These machines are designed for gentle sweet potato harvesting, but can be used for most root crops like potatoes, sweet potatoes, beets, carrots, garlic, ...
-
Manufactured by US Small Farm Equipment Co.based in USA
The potato diggers are made to dig one row of potatoes or other root crop. The machines can be pulled on the centerline of the tractor or offset as when straddling two rows and digging one. The standard diggers return the produce onto the dug soil after shaking the bulk of the soil through the chain. The soil type and produce size dictate ...
-
Manufactured by Corner Machinery Ltd.based in TURKEY
Cultivator is manufactured with 7-9-11-13 tines. It cultivate deeply for preparing seed bed loosing the soil cutting root crops and improving the water ...
-
Distributed by Niagri Engineering Ltdbased in UNITED KINGDOM
An alternative to barrel washers, a more aggressive wash for hardy vegetables. The Niagri Brush Washer cleans a wide range of root crops in a continuous and speedy process.Mindful of eliminating damage to crops, this design incorporates a hydraulically operated table to control the cleaning time and speed.Manufactured to an extremely high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you