Only show results available in Virginia? Ok

sheep feeding equipment Equipment

  • Trailed Hog Feeder

    250kg hogg feeder. 8 feet long on legs, or with wheels and a jack, suitable for towing behind an ATV.

    By Penderfeed Livestock Equipment based in BERWICKSHIRE, UNITED KINGDOM. from Sheep Feeding Product line

  • Galvanised Hog Feeder

    600kg and 300kg galvanised hogg feeders with adjustable legs and adjustable slides to regulate feed. Pallet fork lifting facility and lifting loops at the top. 8 feet long. The 300kg model is available as a trailed unit.

    By Penderfeed Livestock Equipment based in BERWICKSHIRE, UNITED KINGDOM. from Sheep Feeding Product line

  • Sheep Housing

    Suitable for bedded yards or slats. Designs suitable for hill or lowland sheep. Simple to remove for clearing out. Vertical or hirizontal rail feed barriers.

    By Rancher based in Castle Douglas, UNITED KINGDOM. from Feeding & Housing Equipment Product line

  • Feeding Rings

    22 feeding spaces. Main frame: 25mm x 25mm hollow section in two halves. Available in painted or galvanised finish.

    By Glendale Engineering (Milfield) Ltd based in Northumberland, UNITED KINGDOM. from Sheep Feeding Equipment Product line

  • Model 8ft - Double Sided Lamb Creep Feeder

    2440mm (8ft) Long x 460mm (1ft 5″) Wide High 650mm (2ft 1.5″).  170kg Hopper Capacity. 24 Feed Spaces.Accomadates approx 80 Lambs. Has a fully adjustable feed ladder on winder mechanism with lift up easy exit side ladders reducing instances of head trapping. Lightweight Galvanised. Easy moved on two 250mm (10″) diameter ...

    By Cormac based in Tuam, Co, IRELAND. from Sheep Feeding Equipment Product line

  • Hopper Lamb Creep Feeder

    50KG Hopper Capacity. 16 Feed Spaces. Accomadates approx 50 Lambs. Hopper Frame Dimensions 730mm(2ft 5″) x 730mm(2ft 5″)

    By Cormac based in Tuam, Co, IRELAND. from Sheep Feeding Equipment Product line

  • Lamb Creep Feeder - Single Sided

    With single fold-out Glendale feeding trough, complete with lifting hooks. Main frame: 40mm hollow section.  Adjustable rails: 50mm pipe. Back and sides: steel sheet.  Roof: galvanised sheet. Length: 7ft 3in / 2.2m  Width: 3ft 11in / 1.19m  Height: 3ft / 920mm. Available in painted or galvanised finish.

    By Glendale Engineering (Milfield) Ltd based in Northumberland, UNITED KINGDOM. from Sheep Feeding Equipment Product line

  • Waller Watson - Sheep/Young Stock Feed Trailer

    Suitable for round bale silage or meal feeding, 54 spaces, feed rails are completely removable. A robust all steel construction feeding trailer, with heavy duty 6.00 x 9 wheels and 5 stud axels. Bod. Robust Steel Construction. Heavy duty wheels. Removable feed rails.

    By Waller Watson Ltd based in Co. Down, IRELAND. from Feeding Equipment Product line

  • Hook Over Hayracks

    Ideal for indoor feeding. 1830mm (6ft) long x 400mm (1ft 4″) wide x 420mm (1ft 4.5) high. Can be used to feed sheep or cattle.

    By Cormac based in Tuam, Co, IRELAND. from Sheep Housing Equipment Product line

  • Walk Through Sheep Feeders

    The walk through feeders come in 8ft and 10ft long. Ideal for dividing sheep pins Provides a means of feeding concentrates without entering pen.

    By Cormac based in Tuam, Co, IRELAND. from Sheep Housing Equipment Product line

  • Model 4 T/H - UP/4 - Feed Production Unit

    UP4 is the ideal solution for farms and industries who wish to produce directly feed for their livestock (cattle, poultry, pigs, sheeps, etc) in a compact-sized plant at a price that is easy to recover. The dozens of units produced so far are proving that  UP4 fully satisfies those requirements. The drawing illustrates an UP4 with its basic ...

    By MULMIX S.p.a. based in Campo San Martino (Padova), ITALY. from Feed Product line

  • Model PG102 05 01 - Sheep Troughs

    To obtain a row of troughs, you should order the 2/5m-sections/ which are automatically equipped with a footing. The second element ordered will thus support the f rst one. To f nish a line, you should order an ending frame, which will bear the end of the last element. The breeder can close the row of troughs by adding a pair of end pieces to ...

    By Pasdelou Galva based in COULANS-SUR-GEE, FRANCE.

  • Model PG102 01 01 - Sheep Hurdles

    These hurdles are designed with a recess on the rear part to get over a trough. A lambing hurdle with drinker passage can be integrated in a row of pens, ideally every 2 hurdles. These lambing hurdles are made of galvanised tubes 0 25 mm. Their conception combines lightness and robustness. They can be interlocked thanks to 3-hole plates. ...

    By Pasdelou Galva based in COULANS-SUR-GEE, FRANCE.

  • Sheep Milking System

    Ability to monitor the animals and easy access to udders is ensured by rear milking system for sheep. Perpendicular stands equipped with feeding trough and a blockade make milking easy, ergonomic, and efficient. The parlours are equipped with a state—of-the-art system for measurement of milk volume and a system for automatic vacuum ...

    By Serwis-Centrum Ltd based in Bydgoszcz, POLAND. from Other Products Product line

  • Fullwood - Goat and Sheep Parlours

    Fullwood has a complete range of stalling suitable for small ruminants, from static systems and rapid exits, to swing over parlours and large rotaries, with or without feeding. Our largest rotary can milk up to 1000 goats or sheep per hour. Fullwood has a full range of milking equipment specifically designed for the very different udder ...

    By Fullwood Ltd based in Ellesmere, UNITED KINGDOM. from Fullwood Conventional Milking Parlours Product line

  • Mill Equipment

    Gasaway, Inc. is a leader in the design, development and construction of feed mills, grain elevators, and other bulk material processing facilities, for on-farm feed mixing systems, as well as on-farm storage. Throughout our history, we have built small specialized feed mills, as well as commercial feed mills. Gasaway, Inc. feed mills are used to ...

    By Gasaway, Inc. based in Bay City, TEXAS (USA).

  • Model GMM-1 - Grain Mill

    Grain mill is intended to mill grains for feeding animals in an individual farms. Grain mills are an essential element of any livestock feeding operation, whether you are feeding cattle, horses, sheep, goats, poultry, or pigs. Getting the maximum animal nutrition out of grain means cracking the hull of oats, barley, corn, and, even legumes like ...

    By JSC Radviliskis Machine Factory based in Radviliskis, LITHUANIA. from Farm Equipment Product line

  • Stock Handling Equipment & Trailers

    John Thorburn & Sons can supply or manufacture a range of trailers, cattle and sheep handling and feeding equipment. Manufactured to a high standard to be strong and robust.

    By John Thorburn & Sons based in Duns, UNITED KINGDOM.

  • Model AP-Mag 18 - Animal Feed Supplement

    AP-18 and AP-Mag 18 supplements are designed to be fed to sheep, grazing cattle, horses and goats. These unique supplements are second to none when compared to other blocks. They are the products of a state-of-the-art patented process that provides a unique 24-hour feeding system. AP-18 and AP-Mag 18 supplements are exceptionally dense blocks that ...

    By SmartLic Supplements -New Generation Supplements based in Belle Fourche, SOUTH DAKOTA (USA).

  • Model AP-18 - Animal Feed Supplement

    AP-18 and AP-Mag 18 supplements are designed to be fed to sheep, grazing cattle, horses and goats. These unique supplements are second to none when compared to other blocks. They are the products of a state-of-the-art patented process that provides a unique 24-hour feeding system. AP-18 and AP-Mag 18 supplements are exceptionally dense blocks that ...

    By SmartLic Supplements -New Generation Supplements based in Belle Fourche, SOUTH DAKOTA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you