silage Equipment in Italy

  • Model SHT-2 P - 3-Point Hitch Hay Tedder

    Sovema SHT-2 P, 3-point hitch hay tedder has been designed for turning,fluffing and tedding any kind of hay. Efficient and reliable machine for small operations.

    By Sovema S.r.l. based in Gaggio di Piano (Modena), ITALY. from Hay Silage Making Product line

  • Model SHT-4 P - 3-Point Hitch Hay Tedder

    Built with the best quality of cast iron and steel, the SHT-4 P hay tedders series is the perfect machine for any kind of hay. This machine has a big versatility and low power absorption.

    By Sovema S.r.l. based in Gaggio di Piano (Modena), ITALY. from Hay Silage Making Product line

  • Silage Bucket

    The silage bucket is a machine that is designed to load and transport silage. The basic construction is a bucket with a cutter arm in order to transfer product into the container, which is driven by hydraulic piston motor. The controls are electro-hydraulic with a control panel in the driver's cabin. Hydraulic oil circulation is ensured in the ...

    By Giordano S.A.S based in Busca (CN), ITALY.

  • Model M23B - Silage Fork

    A great silage fork equipped with a powerful hydraulic cylinder and replaceable teeth made of reinforce steel, for all types of feed. The grapple goes up to vertical position and this enables easy grabbing e.g. on a round bale.

    By CSF srl based in Grumolo delle Abbadesse, ITALY. from Attachments Product line

  • Mounted Silage Harvester

    The mounted silage harvester by Giordano is a machine that enables the loading, mixing, and distribution of corn silage into the barn (silage corn means product obtained by 'chaffing' or finely grinding the whole corn plant while still green); it can also work with other products such as barley, sorghum, and grass (ryegrass) provided that they are ...

    By Giordano S.A.S based in Busca (CN), ITALY.

  • Model IR6 - Grain and Silage Bagger

    Machine for bagging grains in horizontal plastic silos. The bagger is a machine driven by the power take-off of an agricultural tractor of average power (45 HP) that fills the silobag by using an auger driven by a hydraulic motor. Grains may be loaded from above by means of the auger wagons, while silage is introduced sideways through suitable ...

    By Boschi Servizi srl based in Villanova di Ravenna, ITALY. from Bagging Product line

  • Greenhouse Cladding Film

    Our greenhouse cladding films are tear resistant, perforation resistant and are of longer duration. Thus this product is ideal for silage as it protects from heat, dust, rain and air.

    By Valota SpA based in Angeli Bergamo, ITALY. from Agricultural Films Product line

  • Sigma 4 - Model BK Series - Multigrab Bucket

    Designed to load different types of products, such as compost, forage and straw.  The bucket design with closed bottom enables an easy and accurate loading of the material, as well as a comfortable penetration into compact products such as silage. Its use requires the fitting of a supplementary hydraulic line on the loader.

    By SIGMA 4 S.p.A. based in Russi (RA), ITALY. from Implements Product line

  • Sigma4 - Bulldozer Blade

    The deep experience and the high manufacturing technology developed by Sigma 4 are combined in this line of front dozer blades for crawler tractors. Inspired by an industrial blade design, rugged construction and full reliability, the dozer blade can perform heavy duty jobs at the farm. Clearing land or snow, piling silage, levelling ground, ...

    By SIGMA 4 S.p.A. based in Russi (RA), ITALY. from Blade Product line

  • Championfeed - Mixer Feeder With 2 Screws Milling Cutter

    Constructive Features: cutting, mixing, distributing machine equipped with 2 cutting augers and milling cutter - lower auger's transmission by gears immersed in oil bath - n° 01 discharge conveyor cm 65, mounted in the middle on the right hand side with manual regulation on height - rear opening for the loading of loose products - milling ...

    By Mutti Amos Macchine Agricole Srl based in Asola (MN), ITALY. from Cutter-Mixer Product line

  • Model PUP 200 RTA - Three Axes Dumper Trailer

    It 'a kind of tipping trailer only behind in different versions and in different sizes with box type dumper. Suitable for silage and grain in general. The hydraulic lift tailgate, guarantees the tightness through the rubber seal and two hydraulic cylinders which act as tie rod. The rear axle is steerable and the block in reverse takes place via ...

    By Pupin Rimorchi S.N.C based in Romans d`Isonzo, ITALY. from Dumper Trailer Product line

  • Model GF325 - High Performance Fixed Chamber Baler

    The all-new GF325 full roller fixed chamber baler is designed for intensive professional use through long working days where high efficiency is required. The GF325 is developed to perform well in heavy silage conditions. A new bale chamber design with 17 ribbed rollers ensures consistently high density bale formation in all conditions.

    By Gallignani based in Russi (RA), ITALY. from Round Balers Product line

  • Model G 440 - Round Bale Wrappers

    The G 400 A is a three-point mounted wrapper with a simple but very reliable way of wrapping silage bales. It is ideal for ’wrap and stack’ operations. When the bale is being transported to the storage site for wrapping, this three point mounted version is the ideal solution. It can be mounted on the rear or front hydraulics of ...

    By Gallignani based in Russi (RA), ITALY. from Bale Wrappers Product line

  • Storage Silos for Pet Food

    The exclusive constructive system of the Silos provides a robust metallic weight bearing structure, suitably designed (calculated and dimensioned statically) to support loads due to the silage of products with a high specific weight; in the calculations even all the possible additional higher loads are considered with the existing or planned ...

    By Cusinato Giovanni Srl based in San Martino di Lupari, ITALY.

  • Akita - Horizontal Wagons

    The new “Akita” cutter-mixer distributor wagon, designed for continued heavy work, is a special machine that brings together advanced technology and exceptional sturdiness. These characteristics, along with the recognized reliability of the “STORTI” brand, make it superior to all the other machines of its own sector. The ...

    By Storti S.p.A. based in Belfiore (VR), ITALY. from Horizontal Wagons Product line

  • Model RB 120 - Round Baler

    The new fixed chamber RB 120 allows a full roller baler version. It is specifically designed for wet crop harvesting and excellent silage wrapping. It is ideal for hard working conditions.The RB 120 is equipped with double automatic twine tying system placed in very good positions easy for maintenance and a strong discharge ramp. The pick-up width ...

    By Enoagricola Rossi s.r.l based in Calzolaro di Umbertide, ITALY. from Agricultural Implements and Backhoes Product line

  • Fiberglass Tanks

    Reinforced fibreglass tanks for liquids of any weight. The LODA fiberglass-reinforced plastics tanker, is likely to contain any liquid specific weight (just to be indicated at time of request) and is composed by: a supporting structure in hot-dip galvanized steel and a central block the drain.

    By LODA S.r.l. based in Brescia, ITALY.

  • Aramis - Model II - Fully Automatic Feed Robot System

    The fully automatic feed robot HETWIN ARAMIS carries out five jobs – weighing, cutting, mixing, dosing and conveying – in a perfect process and to your full satisfaction.

    By TDM- Nutriservice s.r.l. based in San Paolo BS, ITALY. from Cows- Robot Product line

  • Husky - Horizontal Cutter Mixer Wagon

    The new HUSKY desilating/cutter-mixer distributor wagon represents the natural evolution of the experience acquired with the previous horizontal mixing machines (Alano, Boxer, Bulldog, Labrador), emphasizing their best qualities:

    By Storti S.p.A. based in Belfiore (VR), ITALY. from Horizontal Wagons Product line

  • Ultima - Non-Stop Bale Wrapper

    In tune The TIM Tractor Implement Management system controls the tractor’s ground speed as it monitors the current load on the baler to prevent ‘overfeeding’. There is plenty of time for the bale to perform as many rotations in the chamber as necessary to achieve the required density.

    By Krone Holding GmbH & Co. KG Office in Sommacampagna (VR), ITALY. from Round Balers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you