Only show results available in Virginia? Ok

silage bucket Equipment

  • Model 108 Type SHN M HL - Silage Bucket

    for courtloader/ skid-skeer-loader. hardened cutting edge 150x16mm (HB 500). with 1 inlying middle reinforcement. thick material main tube with welded sickles. 2 hydraulic cylinders, opening width ca. 1470mm. 1 sickle all-side

    By Hesse Metalltechnik GmbH based in Bad Sassendorf, GERMANY. from Courtloader Accessory Equipments Product line

  • Silage Bucket

    The silage bucket is a machine that is designed to load and transport silage. The basic construction is a bucket with a cutter arm in order to transfer product into the container, which is driven by hydraulic piston motor. The controls are electro-hydraulic with a control panel in the driver's cabin. Hydraulic oil circulation is ensured in the ...

    By Giordano S.A.S based in Busca (CN), ITALY.

  • Model GS - Silage Buckets

    The bucket can be used to pick up both silage and bulk materials without any problems. The robust design with a scraping edge made of Hardox ensures a long service life. The tines of the toothed bar which are pointed on four sides enable easy penetration of solid silage.

    By B. Strautmann & Söhne GmbH u. Co. KG based in Bad Laer, GERMANY. from Picking-up Technology Product line

  • Auger Buckets

    Discharges feed products. Chute can be mounted to the left or right. For use with Telescopic Handlers or Fore-end Loaders. Not Suitable for silage.

    By Agriquip based in Cumbria, UNITED KINGDOM. from Buckets Product line

  • CWS - Telehandler Buckets

    Typical Uses:With Buckets: Loading feed trucks, stacking bales, corral cleaning, working silage from top to bottom of the pile, handling chopped hay.

    By CWS Industries based in Surrey, BRITISH COLUMBIA (CANADA). from Agricultural Buckets Product line

  • AP - Model KG 2400 - Silage Grabbers

    The AP silage grabbers are exceedingly suitable for the extracting of gras, corn, potato-fibres etc. They can also be used as an ordinary waste bucket. Due to the extremely solid construction and the Euro quick attachments the AP silage cutters can be combined with almost every frontloader.

    By AP Machinebouw B.V. based in RUTTEN, NETHERLANDS.

  • Holaras - Model Jumbo / Viking - Silage Spreader

    The -holaras- Silagespreaders process large quantities of grass silage intensively and evenly. In addition, they allow a quicker distribution in one working pass. During the distribution you can continue to drive the tractor along the middle of the grass silage, avoiding dangerous manoeuvres along the edges and lost time. For raising the edges, ...

    By Holaras | Hoopman Machines B.V. based in Aalten, NETHERLANDS. from Forage-harvesting Product line

  • Agros Clamp

    Agros Clamp delivers one million lactic acid-producing bacteria per gram of grass, resulting in a fast and controlled fermentation with little protein breakdown. This produces nutritionally better and more palatable silage, increased intakes and improved animal performance. Don't take chances with your silage - use Agros Clamp to ensure fast ...

    By Volac International Limited based in Hertfordshire, UNITED KINGDOM. from Agriculture- Forage- Silage Additives Product line

  • Model SB - Shear Bucket

    A strong and versatile bucket. It will neatly cut silage blocks leaving a sealed face yet still can be used as a re-handling bucket for loose feedstuffs.

    By Gurney Reeve & Co. Ltd based in Wymondham, UNITED KINGDOM. from Material Handling Attachments Product line

  • Model Abb. 219a - Silage Rake for Traktors

    The Silage rake is used for pulling down the silage out of oversized silage stocks. It is also be used for rake down the silage from the silage stock an load it with a light material bucket.

    By Bressel Und Lade GMBH based in VISSELHÖVEDE, GERMANY. from Court Loader Product line

  • Sigma 4 - Model BK Series - Multigrab Bucket

    Designed to load different types of products, such as compost, forage and straw.  The bucket design with closed bottom enables an easy and accurate loading of the material, as well as a comfortable penetration into compact products such as silage. Its use requires the fitting of a supplementary hydraulic line on the loader.

    By SIGMA 4 S.p.A. based in Russi (RA), ITALY. from Implements Product line

  • Model 5400-810 - Tractor Driven Silage Bagger

    Winlin was developed and designed for Scandinavian farming. The feed is tipped onto the feed table with a front loader or tractor bucket. The table’s speed can be regulated to match the moisture and consistency of the feed, ensuring an even, smooth and airtight bag. The unique rotor pushes the feed both up and out, packing the feed into the ...

    By Winlin based in TINGSTÄDE, SWEDEN.

  • Parmiter - Shear Bucket

    Designed with the Maize Grower and Complete Diet Feeding systems in mind the Shear Bucket encapsulates all the elements of the Shear Grab, and combines it with a bucket for unrivalled versatility. The Shear Bucket therefore effectively handles loose foodstuffs and concentrates eliminating the need for two attachments, and the untimely changes made ...

    By Shelbourne Reynolds Engineering Ltd based in Bury St Edmunds, UNITED KINGDOM. from Livestock Product line

  • Model 100 - Mixer Feeder Bucket

    A new version of the MELODIS is available “100% CHOPPED GRASS SILAGE” thanks to its spiral mixer made in Hardox (Melodis 100). This new model has been especially designed for mixing and feeding chopped grass silage (maximum 6cm length) for a Total Mixed Ration (maize, grass, dry food) and optimizes the ration ...

    By Emily based in Tréflévénez, FRANCE. from Agriculture Equipment Product line

  • Model M - Side-Shooters Bucket

    Bucket Side-Shooters are designed to spread sand or sawdust into free stall barns, back fill, and can be used in many other applications. The bucket contains a positive drive conveyor that dispenses material from either side. From silage to stone the Mensch Side-Shooter shoots it all.

    By Mensch Manufacturing, LLC based in HASTINGS, MICHIGAN (USA). from Side-Shooters Product line

  • Heavy Duty Loader Buckets

    The Versa Buckets are a unique line of clam shell style buckets that are mounted on loaders.  They can be mounted using quick-attach systems available today.  The buckets are usually put on skid-steers, ag-loaders, and wheel loaders.  Their main use has been for removing silage from the bags.  In more recent years many more ...

    By Versa Corporation based in Astoria, OREGON (USA).

  • Model 66 - Skid Steer Tine Grapple Bucket

    Our Professional Series Tine Grapple is great for applications such as silage, brush, caked materials, hay bales, and so on. The tines are solid 2 1/4' and each one is replaceable.The item comes complete with universal skid steer mounting plate as well as hydraulic hoses and flat faced couplers

    By Spartan Equipment based in Baltimore, MARYLAND (USA). from Tine Grapple Product line

  • Farmcom Wile - Model 25 - Hay Moisture Meters & Silage Moisture Meters

    Wile 25 is a digital moisture meter for dry hay and forage. It is available with two different measurement probes and a dish probe for the measurement of loose hay in a bucket. Wile 25 has an easy-to-read LCD display. The user can adjust calibration to match the readings with another meter.  Wile 25 has an automatic temperature compensation ...

    By Farmcomp Oy based in Tuusula, FINLAND. from Wile Moisture Testers - Wile for Hay Product line

  • Model 60 - Skid Steer Tine Grapple Bucket

    Our Professional Series Tine Grapple is great for applications such as silage, brush, caked materials, hay bales, and so on. The tines are solid 2 1/4' and each one is replaceable.The item comes complete with universal skid steer mounting plate as well as hydraulic hoses and flat faced couplers.

    By Spartan Equipment based in Baltimore, MARYLAND (USA). from Tine Grapple Product line

  • Model GS - Skid Loader Bucket & Grapples

    Built for machines with the universal skid loader quick attach. This bucket's larger capacity is designed to allow todays larger Skid Steers, Compact Utility Tractors, Compact Wheel Loaders, and Telehandlers take advantage of their heavier lift capabilities.

    By GrabTec based in Larchwood, IOWA (USA). from Products for Compact Wheel Loaders Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you