Silage Equipment Equipment In Europe
-
Manufactured by HYDRAC Pühringer GesmbH & Co KGbased in AUSTRIA
Silo cutting tong 1,20.Width 1,20 m.capacity 0,65 m³.weight 380 kg.Dimensions of the tong: cutting height 78 cm.cutting depth 75 cm.cutting height with the lifting frame up to 2,70 ...
-
Manufactured by Harry West (Prees) Limitedbased in UNITED KINGDOM
Built for strength and durability, the range of monocoque trailers from Harry West have been developed to tackle the toughest working conditions on the land. Available in 10 to 16 tonne models, each features a parallel chassis with monocoque constructed tapered body for easy unloading, and tandem axles. The silage equipment kit provides ...
-
Manufactured by EUROMARKbased in FRANCE
, the filling of the body is fast and optimal, and the silage distribution is homogeneous. Equipped with a semi-automatic 3-point hitch (TX200 and TX250), the hitch is greatly ...
-
Manufactured by METAL-FACH Sp. z o. obased in POLAND
Our bale grab is intended for the transport of straw, hay, and silage bales. It is equipped with one servomotor. The arms float meaning that the closing and the opening of the arms is independent of each other and at different speeds which allows for the grabbing of bales out of a stack without damaging the adjacent bales. A solid and ...
-
Manufactured by Fimaksbased in TURKEY
for the best quality silage. The flywheel is equipped with 10 specially hardened knives revolving at nearly 1600 rpm. There are two feeder drums and two pressure rollers that control the feeding of the maize to the flywheel. One of the pressure rollers is spring-loaded and toothed; the other one is not. The pressure rollers are vertically mounted right ...
-
Manufactured by Bressel und Lade Maschinenbau GmbHbased in GERMANY
Biggest on market available Silageroller with 1160mm diameter for optimal results in silage ...
-
Manufactured by Bressel und Lade Maschinenbau GmbHbased in GERMANY
With the Bale unwrapper you can easily unroll straw and silage ...
-
Manufactured by MAMMUT Maschinenbau Ges.m.b.H.based in SWITZERLAND
The Silage Comb Professional is the perfect silage extraction device for farm sizes from 25 animals to 120 animals and more. A hydraulically driven ‘comb’ loosens and removes the silage and fills the container with up to 4.6 m³ of load volume. The fundamental benefit over other systems is that removal, transportation, ...
-
Manufactured by RoyerMak Makina LTD.STIbased in TURKEY
Royer Maize Chopper is a result of many years of experience in the harvesting of silage maize. It is known for its high quality and convenient ...
-
Manufactured by Kawecobased in NETHERLANDS
Standard the RADIUM 45 and 50 have a buggy tandem with a self steering axle. The grassland is treated with care and the tire wear caused by turns on solid ground is ...
-
Distributed by STAJAbased in NETHERLANDS
The RADIUM silage wagon is a proven concept. Over the years more than 1000 wagons left the factory in Zevenaar NL and found their way next to many forage harvesters around the ...
-
Manufactured by LivestockEquipment.Co.UKbased in UNITED KINGDOM
Silage from clamp to sheep without waste. Suitable for round bales or clamp silage. Use outside or inside. 12' long, 4' wide. Robust box steel frame. 3/4' ply-board floor & side. Optional lamb rails available. Optional GREEDY boards ...
-
Manufactured by Komsilaj Makinebased in TURKEY
The KM 500 baler is the result of rigorous work and technical research developed by competent engineers from KOM SILAJ. Designed mainly for the silage baler it also allows to treat other materials like; beet pulp, corn silage and all other fodder crops to facilitate the work of ...
-
Manufactured by Komsilaj Makinebased in TURKEY
The KM-1000/1200 baler is the result of rigorous work and technical research developed by competent engineers from KOM SILAJ. Designed mainly for the silage baler it also allows to treat other materials like; beet pulp, corn silage and all other fodder crops to facilitate the work of ...
-
Manufactured by Komsilaj Makinebased in TURKEY
The KM-100 and KM-200 baler is the result of rigorous work and technical research developed by competent engineers from KOM SILAJ. Designed mainly for the silage baler it also allows to treat other materials like; beet pulp, corn silage and all other fodder crops to facilitate the work of ...
-
Manufactured by Komsilaj Makinebased in TURKEY
The KM-1200/1500 baler is the result of rigorous work and technical research developed by competent engineers from KOMSILAJ. Designed mainly for the silage baler it also allows to treat other materials like; beet pulp, corn silage and all other fodder crops to facilitate the work of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you