Only show results available in Virginia? Ok

silage tube Equipment

  • ELHO Tube - Model 2020 ACI - Versatile Silage Bale Wrapper

    The ELHO Tube 2020 ACI was designed in Finland for the quick and safe baling of heavy silage bales and its manufacture began as early as 1993. This machine is designed to withstand Nordic conditions and is exported all over the world. The Tube 2020 ACI has a very durable and high structure: the tube leaves the machine at a right angle, the machine ...

    By ELHO Oy El-Ho Ab based in PÄNNÄINEN, FINLAND. from Silage Bale Wrappers Product line

  • Model P15 – P19 - Silage Feeder Dispenser Mounted or Trailed

    Silage: Round Silage rake, 1 cylinders on the arms (cylinders and arms out of the body), 1 cylinders on the silo-unloading rake. Shredding - Dispensing – Mulching: 1 rotor hydraulic driven, 1 cylinder on the unloading deflector, Trap door of unloading opposite at the rotors (manual), Unloading on the right or left (to precise). Belt ...

    By JEULIN based in Villebarou, FRANCE. from Silage Feeders Product line

  • Model BREVA DP - Silage Feeder Straw Blower Dispenser Mounted

    Silage: Round silage shovel, 2 cylinders on the arms (cylinders and arms out of the body), 2 cylinders on the silage shovel. Shredding - Dispensing – Mulching: Shredding by blower and cone, Blower housing in anti-abrasive steel (Brinel 430 hb, 120 kg steel), Superior protection deflector with hydraulic control in front of the blower, Free ...

    By JEULIN based in Villebarou, FRANCE. from Silage Feeders Product line

  • Model HELIOS DP - Silage Feeder Straw Blower Mixer

    Silo-unloading - Rounded shovel: 2 cylinders on arms, 2 cylinders on the silage shovel, Indicator of the shovel position, Water tightness plate on the shovel retractable by springs. Shredding - Feeding –Bedding: 1 shredder rotor mechanically driven by durable belt and automatic tightening equipped with 15 big blades predisposed to wrapped ...

    By JEULIN based in Villebarou, FRANCE. from Silage Feeders Product line

  • Model 108 Type SHN M HL - Silage Bucket

    for courtloader/ skid-skeer-loader. hardened cutting edge 150x16mm (HB 500). with 1 inlying middle reinforcement. thick material main tube with welded sickles. 2 hydraulic cylinders, opening width ca. 1470mm. 1 sickle all-side

    By Hesse Metalltechnik GmbH based in Bad Sassendorf, GERMANY. from Courtloader Accessory Equipments Product line

  • MAFEX - Silage Sprayers

    Mafex-Silage spraying systems ares used for application of liquid silage support agents directly during chaffing. Atomisers are installed in protective tubing at an appropriate location with an adapter suited to the chopper. The atomiser cannot clog thanks to its special design and installation angle. On John Deere choppers installation by the ...

    By Mantis ULV Sprühgeräte GmbH based in Geesthacht, GERMANY. from Harvest Protection Product line

  • Model GS - Silage Buckets

    The bucket can be used to pick up both silage and bulk materials without any problems. The robust design with a scraping edge made of Hardox ensures a long service life. The tines of the toothed bar which are pointed on four sides enable easy penetration of solid silage.

    By B. Strautmann & Söhne GmbH u. Co. KG based in Bad Laer, GERMANY. from Picking-up Technology Product line

  • Terry-Agri - Model silobagpro - Silo bag / Silage bag

    Terry-Agri silo bags are the heavyweight plastic tubes, usually around 6 to 14 ft (1.83 - 4.26m) in diameter, and of variable length as required for the amount of material to be stored.*Superior puncture and tear resistance*UV resistance *Panda color*Thickness:150um-250um , diameter: 6ft -14ft

    By Terry-Agri Inc. based in Beijing, CHINA.

  • Model CF01K - Manure/Silage Forks

    The Cherry Manure/Silage Fork range starts at 4' and goes upto 8'. Although our standard range is below, we can quite easily manufacture something to your specific needs. The fork frame is built with strength in mind with a tough box section 'denture' to take one of the three tine types we offer. We can supply a conus 2 bush to take either to ...

    By Cherry Products Ltd based in Oxfordshire, UNITED KINGDOM. from Forks Product line

  • Model Abb. 219a - Silage Rake for Traktors

    The Silage rake is used for pulling down the silage out of oversized silage stocks. It is also be used for rake down the silage from the silage stock an load it with a light material bucket.

    By Bressel Und Lade GMBH based in VISSELHÖVEDE, GERMANY. from Court Loader Product line

  • TARI-BAG - Model TGB09 - Tari-AG SILAGE BAGS / Grain bags

    Our white/black bag is triple layered extruded ,heavy weight plastic tubes, usually around 9ft to 12ft in diameter, can be custom-made to client specifications .Size: 9'X200', 9'X250' , 9'X300' , 9X400' . 10'X200', 10'X250' , 10'X300' . 12'X200', 12'X250' , 12'X300' .

    By TARICH INDUSTRIAL CO.,LTD. based in CHINA.

  • Artex - Model CB1000 - Tractor Pulled Combination Silage / Manure Spreaders

    Artex - Model CB1000 - Tractor Pulled Combination Silage / Manure Spreaders;; length 26′. width 7’6″’. wall height 4’. capacity 1000 Cu. Ft.. horsepower 200.

    By Artex Manufacturing based in Redwood Falls, MINNESOTA (USA).

  • Portable Feed Bunks

    Feeds silage, grain or hay. Two inch turned in ledge on bunk helps eliminate waste. Tube around top is 2″ x 2″ square and adds strength to the feeder. Telescoping tongue is standard. Trough height is 28″. Custom sizes & Designs available.

    By Weldy Enterprises based in Wakarusa, INDIANA (USA). from Feeders Product line

  • Greenhouse Cladding Film

    Our greenhouse cladding films are tear resistant, perforation resistant and are of longer duration. Thus this product is ideal for silage as it protects from heat, dust, rain and air.

    By Valota SpA based in Angeli Bergamo, ITALY. from Agricultural Films Product line

  • Model plus LM - Mounted Ploughs

    Lightweight, yet robust, the LM range ploughs are ideal for universal use on smaller mixed-purpose farms. The ©plus LM can easily meet any requirements, whether needed for turning grassland or silage maize, for traditional cereal cultivation, or even for use with maize grains.

    By Gebr. Knoll based in Rouveen, NETHERLANDS.

  • Green Chop Hay Feeders

    Designed to feed silage, green chop, large round or square bales The 3/4' exterior plywood is 4ft. high and is easy to remove for feeding large round bales. The 'V' in center promotes feed-down within the reach of the animals. Equipped with a telescoping tongue and 11 L15 8-ply tires and tubes. Trough height is 24'.

    By Weldy Enterprises based in Wakarusa, INDIANA (USA). from Feeders Product line

  • Round Bale Feeders

    The My-D- Han-D HAY SAVER is constructed ot 1 inch square tubing formed on the diagonal for greater strength with less weight. The 8 ft. 2 in. diameter HAY SAVER is made into 3 identical 4 ft. high panels. The panels' hinge-pin connection with spring cotters simplifies assembly and allows any section to open for loading. Feeding 3,000 lb. bales ...

    By My-D Han-D Mfg. Co. Inc. based in Dodge City, KANSAS (USA).

  • Dumper

    The low balance point due to the springs mounted below the axle, two tilting cylinders and the solid chassis frame allow my Brantner dumper to tilt over without hasitation even in rough situations. An efficient transport has a special meaning particularly at the silage use. There are clear defined demands: simple handling, huge transport ...

    By Hans Brantner & Sohn Fahrzeugbauges. mbH. based in Laa/Thaya, AUSTRIA. from Agricultural Tippers Product line

  • DURUS - Model 1600 - Universal Dump Tipper

    The universal dump tipper Durus is perfect for transporting all agricultural goods, especially for silage, grain, wood chips and other loose bulk materials. The conical bridge ensures a very high elasticity of a rapid and complete emptying. Even heavy material such as sugar-beet, sand, gravel and mud are no hindrance for the Durus. The dump tipper ...

    By Farmtech d.o.o. based in Ljutomer, SLOVENIA. from Tippers Product line

  • Hay/Grain Feeder

    Perfect for dairy or cattle operations and pasture feeding. Feed, mineral, grain or silage with your loose, large, round or square hay bales. Designed and built so that hay that falls past the first layer of bars falls down onto the feeding pan, keeping it in the feeder. This is attained by the inner rows of bars. A V-type center pushes feed to ...

    By Sioux Steel Company based in Sioux Falls, SOUTH DAKOTA (USA). from Livestock Solutions Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you