Only show results available in Virginia? Ok

Slurry Handling Installation equipment

  • Landia - Model MPTK - Medium Pressure Motor Pump For Dry Installation

    Dry-installed pump for agricultural slurry handling, fitted with cast iron casing. 14 motor sizes from 0.55 to 30 kW. Capacity up to approx. 475 m³/hour. Horizontal or vertical installation (fixed) (shown here with horizontal support leg). Supplied without knife system (Available with standard- or extended knife system). Can be used as ...

    By Landia based in Lem, DENMARK. from Chopper Pumps - Dry-Installed Pumps Product line

  • Model TL Series - Tractor Pump

    The 'TL' Series pumps are suitable for pumping animal waste or poultry waste in installations with a pressure requirement  suitable for sprinkler dispersal and are also great for irrigation. These pumps can be fitted with a chopper cone equiped with rotating knives suitable for chopping solids, they are ideal to pump slurry with fibers in ...

    By AgriBusiness International, Inc. based in Villa Rica, GEORGIA (US) (USA). from Slurry - Waste Pumps Product line

  • Pollution Control - Groundhog Mechanical Slurry Separator

    The Groundhog mechanical Slurry Separator operating principle is based on the proven technology of the National Institute of Agricultural Engineering design for Slurry Separators. The fibre rich solids produced from the slurry can be stacked for easy storage and the now reduced volume of nutrient rich liquid can then be managed more easily than ...

    By Pollution Control (UK) Ltd based in Preston, UNITED KINGDOM. from Agricultural Product line

  • Grain Handling Equipment

    We supply, install and maintain most makes and models of conveying equipment for handling either small quantities or bulk grain, feed, slurry, seed fertiliser and many other products. Machines for special applications can also be obtained to order. A complete range of flat bottomed drying or storage silos and hopper bottomed silos are available. ...

    By Tey Farm Systems Ltd based in Essex, UNITED KINGDOM. from Grain Drying Equipment Product line

  • Submersible Slurry Mixer (1500 RPM) POD

    Submersible agitator for slurry handling in agriculture. Four motor sizes from 2.2 to 11.0 kW. Capacity up to approx. 2,250 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 525 N to 2150 N. Can be installed in full tanks. Movable.

    By Landia based in Lem, DENMARK. from Mixers - Submersible Mixers Product line

  • Submersible Manure Slurry Mixer (300 RPM) POP

    Submersible agitator for slurry handling in agriculture. Three-blade propeller. Planetary gear. Movable. Can be installed in full tanks. Can be installed in tanks with or without cover. Nine motor sizes from 3.0 to 30.0 kW. Capacity up to approx. 7,500 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

    By Landia based in Lem, DENMARK. from Mixers - Submersible Mixers Product line

  • Batching & Blending Systems

    A&B Process Systems has extensive experience in the design, fabrication and installation of industrial and sanitary batch process systems and blend mix tanks and kettles for dosing of liquids, slurries, gases and bulk solids via loss-in-weight and gain-in-weight designs. We utilize a variety of flowmeter and load cell technologies, and can ...

    By A&B Process Systems Corp. based in Stratford, WISCONSIN (USA). from Skidded Systems Product line

  • Mix Tanks

    A&B’s broad range of experience designing, fabricating and installing batching and blending mix tanks and kettles can help you with dosing of liquids, slurries, gases and bulk solids via loss-in-weight and gain-in-weight designs. We utilize a variety of flow-meter and load cell technologies, and can customize a variety of blending ...

    By A&B Process Systems Corp. based in Stratford, WISCONSIN (USA). from Tanks & Vessels Product line

  • Model 1/2 - Flanged End Manual Stainless Steel Diaphragm Valves Unlined

    Wide Selection — available in a wide variety of body materials, linings and end connections. By utilizing such highly resistant linings as Saran, Polypropylene, Kynar, Tefzel, Glass, Rubber, etc., virtually any chemical service within the pressure/temperature limits of the valve can be handled safely and economically.

    By Century Instrument Company based in Livonia, MICHIGAN (USA). from Manual Diaphragm Valves Product line

  • Model 1/2 - Unlined Flanged End Automated Cast Iron Diaphragm Valves

    Wide Selection — available in a wide variety of body materials, linings and end connections. By utilizing such highly resistant linings as Saran, Polypropylene, Kynar, Tefzel, Glass, Rubber, etc., virtually any chemical service within the pressure/temperature limits of the valve can be handled safely and economically.

    By Century Instrument Company based in Livonia, MICHIGAN (USA). from Automated Diaphragm Valves Product line

  • Moyno - Epsilon/Vertical Large Pump

    The Epsilon Pump is a line of technically engineered progressing cavity pumps designed to give least whole life costs and reduced spares requirements. The Epsilon Pump incorporates a PowerDrive transmission which eliminates the need for a double universal joint. This competitively priced pump is reliable and efficient when handling abrasive ...

    By Moyno, Inc. based in Springfield, OHIO (USA). from Large Pumps Product line

  • Cubicle Scrapers

    These will scrape cubicle and feed passages of various widths up to six passages can be operated on one Power pack and Control Panel. One Ram-box is installed at the end of each passage and a double acting Ram moves the central draw bar back and forth. The scraper is fitted with a mechanism that moves it forward with each stroke. At the end of the ...

    By Midland Slurry Systems Ltd based in WARWICKSHIRE, UNITED KINGDOM.

  • Discflo Pumps

    DISCFLO Pumps: Providing High Reliability, Extremely Long Life, and Peace of Mind pumping for various industries including municipal, phosphate, pulp and paper, food, power generation, waste resources, and general industry is our specialty.

    By Gerber Pumps International, Inc. based in Longwood, FLORIDA (USA).

  • Aqua Sorb - Soil Moist Polymer for Soil Hydration and Retention

    Gary and Pam Pippin, residents of water-restricted Castle Rock, Colorado, installed 1,000 square feet of bluegrass sod in their front yard. For two years, they've given their lawn up to a third less water than the neighbors, and have even left it unwatered several times during summer vacations. Yet, today their lawn is the greenest, most ...

    By The ARK Enterprises, Inc. based in Ionia, MISSOURI (USA). from AQUA SORB Product line

  • Spiral Heat Exchangers

    The spiral plate heat exchanger is made by rolling two long metal plates around a center core to form two concentric spiral passages, one for each fluid.  The plate edges are welded shut so that each fluid stays within its own passage and there is no flow bypassing or intermixing. Spacing within the passages is maintained by welded spacer ...

    By Gooch Thermal Systems based in Lebanon, NEW JERSEY (USA).

  • HRS - Model BP Series - Low Shear Rate Piston Pump

    The HRS BP Series piston pumps are hydraulically operated positive displacement pumps that transfers mechanical energy as pressure energy. It is of a completely hygienic design, and incorporates a separator fitted between the piston and the hydraulic chamber to ensure that there is no contact between the product chamber and the hydraulic oil. In ...

    By HRS Heat Exchangers based in Lorquí - Murcia, SPAIN. from Piston Pumps Product line

  • Model XL - Hydro Trike

    Extra extendable axle: more power, more output. Because of the on-going increase of scale and therefor the desire for more capacity, we developed the Hydro Trike XL. The tank of this version has a capacity of 20,5 m³, which is also ideal to empty a 36 m³ truck in 2 times. The otherwise optional Borger 1550 (9m³) pump is ...

    By Frans Vervaet B.V. based in Biervliet, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you