Only show results available in Virginia? Ok

Slurry Separation equipment

  • Model 400 - Slurry Separator

    The Euro-P separator (slurry separator) meets even the highest requirements, manufactured in full stainless steel design with high durability of all parts in contact with the slurry.  The sophisticated rugged design allows for applications in demanding and challenging operating conditions at industrial and agricultural sites.  The ...

    By Euro-P Kleindienst GmbH based in Bad Schwartau, GERMANY. from Slurry Separator Product line

  • Model 1000/600 - Slurry Separator

    The Euro-P separator (slurry separator) meets even the highest requirements, manufactured in full stainless steel design with high durability of all parts in contact with the slurry.The sophisticated rugged design allows for applications in demanding and challenging operating conditions at industrial and agricultural sites.The compact device 'Type ...

    By Euro-P Kleindienst GmbH based in Bad Schwartau, GERMANY. from Slurry Separator Product line

  • Slurry Separation

    Slurry separation gives you more advantages and opportunities in your animal production.It is confirmed that the AGM Screw Press from Agrometer is one of the most efficient solutions for separating fluid and dry matter.Slurry separation is an obvious solution for a number of challenges in your daily operation - and typically you will have more ...

    By Agrometer a/s based in Grindsted, DENMARK. from Slurry Handling Product line

  • Liquid Slurry Separation System

    AL-2 Agro A/S has start 'factory sale' of liquid slurry separation. Marketing and sales of the familiar AL-2 Slurry/Manure Separators become in the future handled by the company behind the separation plants. AL-2 Agro A/S was founded in autumn 2008 with the aim to focus on the agricultural products produced by AL-2 Teknik A/S. Today there is a ...

    By AL-2 Teknik A/S based in Hovborg, DENMARK. from AL-2 Agro Product line

  • Pollution Control - Groundhog Mechanical Slurry Separator

    The Groundhog mechanical Slurry Separator operating principle is based on the proven technology of the National Institute of Agricultural Engineering design for Slurry Separators. The fibre rich solids produced from the slurry can be stacked for easy storage and the now reduced volume of nutrient rich liquid can then be managed more easily than ...

    By Pollution Control (UK) Ltd based in Preston, UNITED KINGDOM. from Agricultural Product line

  • Model 1000 & 2000 - Evolution Slurry Separator

    Made completely in Stainless Steel this Slurry Separator is a best seller, a leader in the market this machine is reliable and easy to maintain.  Manage your slurry and comply to NVZ regulations, solids can be stacked and liquid stored with no stirring required, gives you between 20-40% more storage.

    By CE Projects Ltd based in Market Drayton, UNITED KINGDOM.

  • Triflo - Model 2000 GPM - Dredged Slurry Separation System

    The Triflo Model 2000DSSSR has been designed specifically to accept feed directly from the dredge at a maximum rate of 2000 gpm, Triflo’s unique self contained solid removal technology separates solids from dredged slurry via a three stage system down to 25 um. In addition, the solids that are removed are dewatered to a stackable “pass ...

    By Triflo International Inc. based in Willis, TEXAS (USA). from Environmental Systems Product line

  • Triton Separator - Model TS-5000 - Solid Bowl Basket Centrifuge

    Newly redesigned solid bowl basket centrifuges specially designed for the separation of animal wastes, without the use of polyelectrolytes or any other additive. Click picture for more information. NSF / EPA TESTED AND VERIFIED FOR ANIMAL WASTE SEPARATIONS. The Triton Separator, a solid bowl basket centrifuge, can be used on flushed dairy, swine, ...

    By Kyte Centrifuge, LLC based in Fairview, NORTH CAROLINA (USA). from Inventory Product line

  • Rekitec - Screw Separators for Slurry Processing System

    The screw separator separates the dry substance and liquid. This way the harm a will turn into a profitable article. We supply all separation systems customised for the customer.

    By Rekitec Oy based in Haapajärvi, FINLAND. from Separation Equipment and Separator Components Product line

  • Model MJDI-5200 - Disc Injector

    The MAJOR 5.2m Disc Injector is a combined soil fertilising and furrowing machine with a working depth from 20mm (3/4”) to 60mm (2 1/2”). A powerful Vogelsang macerator delivers slurry evenly through 40mm pipes. The slurry is inserted into slits created by the spring steel self sharpening cutting disks. The unit folds ...

    By Major Equipment based in Mayo, IRELAND. from Slurry Handling Product line

  • Contractor - Model LGP - Slurry Tanker

    The MAJOR LGP Tanker is a robust vehicle designed and manufactured with the larger producer or contractor in mind. The MAJOR LGP Tanker is unique in design, in that the barrel is supported by a separate chassis. The position of the axle relative to the machine length means that a perfect balance is achieved with 80% of the weight running on the ...

    By Major Equipment based in Mayo, IRELAND. from Slurry Handling Product line

  • Agronic - Model LP 125 - Tractor-Operated Manure Slurry Pump

    Agronic LP 125 is a tractor-operated two-phase flow slurry pump. A hydraulic pump at the end of a hose efficiently pumps slurry to a six-winged PTO pump which again pumps the slurry forward. Pumping is possible in places which are inaccessible for regular pumps. The hydraulic pump is detachable so it can also be used separately. A moveable and ...

    By Agronic Oy based in Haapavesi, FINLAND. from Water and Slurry Pumps Product line

  • Slurry Tank

    For preparation of pre-coat and/or body feed of filter media to feed filtration equipment, i.e., filter presses and pressure leaf filters. The slurry tank is typically piped into the filtration system so that fluid going to the filtration system can be circulated through the slurry tank. Filter aid is added to the slurry tank and is delivered to ...

    By ParkProcess, a subsidiary of ParkUSA based in Houston, TEXAS (USA). from Filtration Product line

  • Kivi-Pekka - Slurry Injector

    The KIVI-PEKKA Slurry Injector is an innovative and environmentally friendly way of delivering slurry to Your fields. More durable than other available solutions, the frame is hitched up to the axles of the tank.

    By PEL-Tuote Oy based in RANTASALMI, FINLAND.

  • Solid Separation

    This unit can be used as a solid separator for both sawdust and straw, alternatively it can be used as a sand separator where the sand being reclaimed is not  intended to be recycled and reused as bedding. Electrical power requirement:  0.75Kw  Single Phase or 3 Phase supply.

    By Midland Slurry Systems Ltd based in WARWICKSHIRE, UNITED KINGDOM.

  • Crisafulli - PTO Powered Slurry Trailer Pumps

    Agitate, mix and pump most viscous or solidified sludges from industrial, municipal and agricultural waste lagoons with a SRS Crisafulli slurry pump. The pumps also work well for refineries, municipalities and geothermal plants.

    By SRS Crisafulli, Inc. based in Glendive, MONTANA (USA). from Pumps Product line

  • Model DH - Manure Separator

    The DH manure separator by Albers Manure Handling Systems, Inc. For efficient manure handling on both small and large dairy operations. Reduce odors - Recycle Water - All stainless steel construction.

    By Albers Dairy Equipment based in Chino, CALIFORNIA (USA).

  • Triton Separato - Model TS-5000 - Separator Baskets

    The Kyte Centrifuge companies including Ken Kyte, Dave Kyte and Trevor Kyte have over 50 total years of centrifuge operational, optimizing , trouble shooting, sales, consulting and start up experience. Ken is a chemical engineer with a degree from the University of Delaware, Dave is a mechanical engineer with a degree from Oklahoma State ...

    By Kyte Centrifuge Sales & Consulting based in North Augusta, SOUTH CAROLINA (USA).

  • Agri-Clean - Solids Separation of Animal Manure System

    System for Remove Solids and Nutrients from Animal Manure Wastewater. The purpose of the Agri-Clean System is to remove solids and nutrients from animal manure wastewater. The system consists of an Internal Drum Thickener (IDT), an Agri-Press Screw Press, a Dissolved Air Floatation (DAF) Clarifier, a twin polymer make-down system, a chemical feed ...

    By Press Technology & Mfg., Inc. based in Springfield, OHIO (USA).

  • Mud Spreaders

    Mud spreaders with twin metering screws for liquid and semisolid slurry.

    By C.R.A.I. s.r.l. based in Goito (Mantova), ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you