Only show results available in Virginia? Ok

Slurry Spreading equipment

  • AP - Slurry Tanker for Slurry Spreading

    AP Joy-Controller are special designed to control all the functions of the slurry tanker. Display and Joystick is mounted inside the cabin of the tractor for fully control of the driver. AP Joy controller dosed your application rate automatically by comparing the vehicle speed and dosing flow. All data as delivered manure per acre, daily ...

    By AP Gyllevogne AS based in Nykøbing Mors, DENMARK. from Slurry Tanker AP-GV Product line

  • Agri-Spread - Vacuum Slurry Tankers

    Running Gear, the family owned agricultural machinery manufacturer based in Ballyhaunis, Co Mayo, has extended its range of spreading tanks with the introduction of the LCG Slurry Tanker range. With over 50 years' experience in the manufacture of agricultural machinery, the company operates from a purpose-built factory which boasts the latest in ...

    By Dales Agri Sales Agency based in Hexham, NETHERLANDS.

  • Slurry Mate - Model 400/600 Mtr - Front Reel

    The umbilical method of manure/slurry handling involves pumping the liquid from a liquid storage facility (lagoon or tank) using a high-pressure pump unit, via a pipeline, to a tractor mounted applicator unit. Once the system is set up and the pipeline has been laid, the pump is started and the applicator unit is then driven in straight lines, ...

    By Mastek Ltd based in Cootehill, IRELAND. from Slurry Mate Product line

  • JOSKIN - Model TWINJET - Spreading Boom

    The Twinjet spreading boom makes it possible to spread slurry in a traditional way by means of a ‘‘dual-nozzle’’ system. The two pipes have a swinging scatterer at their end, allowing to spread over a very large width.

    By JOSKIN based in Soumagne, BELGIUM. from Spreading Implements Product line

  • JOSKIN - Model MULTITWIST - Multi-Nozzle Spreading Boom

    The JOSKIN Multitwist multi-nozzle spreading booms allow to spread slurry homogeneously on widths from 12 to 15 m. This spreading tool is made up of two main pipes supported by two triangular frames. On the version of 12 m, each main pipe feeds 4 of the 8 smaller pipes ended by splash plates.

    By JOSKIN based in Soumagne, BELGIUM. from Spreading Implements Product line

  • JOSKIN - Model PENDISLIDE - Line Spreading Boom

    Line spreading boom with skids. Spreading width from 9 to 15 m. Hose spacing : 30 cm.

    By JOSKIN based in Soumagne, BELGIUM. from Spreading Implements Product line

  • JOSKIN - Model PENDITWIST - Line Spreading Boom

    Line spreading boom. Spreading width from 9 to 30 m. Hose spacing: 25 or 30 cm.

    By JOSKIN based in Soumagne, BELGIUM. from Spreading Implements Product line

  • Model T-11C - Slurry Tanker

    Slurry tanker T-11C was designed especially for liquid manure spreading. The machine is purposed for large farms having introduced new technologies on collection, storage and application of organic fertilizers. Slurry hawoling and mixing accomplished by pump which is placed at the front of tanker. Spreading is realizing due to special baffle ...

    By Lmr Azene Ltd based in Riga, LATVIA. from Slurry Tankers Product line

  • Agri - Spread Spreader

    Main distrubitors for this Agri Spread equipment   IS THE STRONGEST MACHINES ON THE MARKET AT A FAIR PRICE,   A manufacture with over 50 years experience. Machine spec Includes slurry door,high floatation tyres,fully galvanised back end,variable speed floor,dynamically balanced twin vertical beaters.Various sizes avabile from 6-12 ton models.Has ...

    By H Fulton Tractors Ltd. based in Derry/Londonderry, UNITED KINGDOM.

  • Bauer - Model Duo 2000 - Double Nozzle Spreader

    The Bauer double nozzle spreader Duo 2000 is a combination of 2 Bauer rear spreaders on a folding frame. It offers a large spreading width at a good price/performance ratio.

    By BSA GmbH based in Marktschorgast, GERMANY. from Slurry Distribution Product line

  • Slurry Tankers

    All our Slurry tankers are manufactured using 6mm high quality steel. Internal implosion rings are fitted to all tanks and fitting to an 8mm full length chassis ensuring maximum support and balance. This enables spreading systems to be mounted to the Tank while maintaining the stability of the tank. ? All fitting on the Tanker are galvanized ...

    By GH Engineering based in Castlederg, NORTHERN IRELAND. from Slurry Tankers Product line

  • Tramspread Tanker Booms

    The hydraulic folding TRAMSPREAD Tanker Booms are built to a high quality and are fully galvanised. Attaching booms to most makes of tanker is a simple operation. Mounted by a 4-point fixing to the slurry tanker and a 6' tank outlet, the TRAMSPREAD 6m Dribble/12m Twin spread nozzle Combination Bar is one machine capable of performing two duties. ...

    By Tramspread based in Mendlesham, UNITED KINGDOM. from Slurry Tankers Product line

  • Tri Axles Slurry Tanker

    The capacity of the tri-axle solutions ranges from 18,500 to 30,000l. These tankers are intended specially for groups of farmers, large farms and contractors. The choice of this type of equipment is determined by two criteria: a large volume of slurry to be transported and a certain distance to be covered between the filling and spreading points.

    By Pichon S.A. based in LANDIVISIAU, FRANCE. from Slurry Tankers Product line

  • Single Axle Slurry Tanker

    This range is designed for users who do not require a large tank capacity. This type of equipment is selected according to two main criteria: short distances (0 to 6km) between the filling and spreading points and a moderate volume of effluents to be used.

    By Pichon S.A. based in LANDIVISIAU, FRANCE. from Slurry Tankers Product line

  • Two Axle Slurry Tanker

    The two-axle range, offering capacities of between 7,150 and 22,700l, is designed for groups of farmers, large farms and service providers. The choice of this type of equipment is determined by two criteria: a large volume of slurry to be transported and a certain distance to be covered between the filling and spreading points.

    By Pichon S.A. based in LANDIVISIAU, FRANCE. from Slurry Tankers Product line

  • Agronic - Slurry Tanker

    Agronic slurry tankers are made for professional users. Thanks to the unique chassis and tank design the centre of gravity is very low.This make the machine very stable when spreading on hilly ground. Ground clearance is still 40 cm (15.75”)..Placing the tank in front of the axles ensures that there is always sufficient weight on the ...

    By Agronic Oy based in Haapavesi, FINLAND. from Slurry Tankers Product line

  • Contractor - Model LGP - Slurry Tanker

    The MAJOR LGP Tanker is a robust vehicle designed and manufactured with the larger producer or contractor in mind. The MAJOR LGP Tanker is unique in design, in that the barrel is supported by a separate chassis. The position of the axle relative to the machine length means that a perfect balance is achieved with 80% of the weight running on the ...

    By Major Equipment based in Mayo, IRELAND. from Slurry Handling Product line

  • Conor - Slootsmid Trailing Shoe

    The Conor Slootsmid Trailing shoe system has been developed with a robust and practical design to operate in all types of terrain. The tank, the trailing shoe and the axle are integrated as closely as possible which gives excellent balance and maneuverability. The trailing shoe has a fully galvanized body and a powerful hydraulic macerator which ...

    By Conor Engineering Ltd. based in Co. Clare, IRELAND. from Slurry Tankers Product line

  • Model SDS 7000 / 7200 - Dribble Bar Slurry Spreader

    The SDS spreader is continuously operating in the fields, whilst the slurry is being pumped directly from the storage tank to the distributor. The average capacity is approx. 100-150 tonnes per hour or the equivalent of 5-6 hectares.Using the SDS 7000 / 7200 is also removing smell issues from the roads. With an DP/APV pump unit the ...

    By Agrometer a/s based in Grindsted, DENMARK. from Slurry Handling Product line

  • MEPROZET - Model PN - 20 / 2 - Slurry Tankers

    CHASSIS: Slurry tanker PN-20/2 is designed as self-supporting tank, mounted on a single-axle chassis. TANK: A steel, hot galvanized tank has internal strengthening rings. Closed rear head with a Ø 420 mm hatch. Sight-glasses are mounted on the front head. COMPRESSOR: As a standard JUROP PN 45M compressor is mounted on the drawbar.

    By MEPROZET Kościan S.A. based in Kościan, POLAND. from Slurry Tankers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you