Snow Plough Equipment Available In Australasia
-
Manufactured by Muck Truck UK Ltd.based in UNITED KINGDOM
The snow plough is easily attached to the front of the bucket. Ideal for removing snow from pathways etc, use on farms for the removal of slurry and it can even be used for grading. The blade can be raised for maneuvering and angled to remove the snow in the desired ...
-
Manufactured by bema GmbH Maschinenfabrikbased in GERMANY
Convincing in winter service: The middle blade in six working widths. bema snow ploughs were developed for use on a wide variety of carrier vehicles. Through optimum adaptation to the ground, low-wear polyurethane clearing blades ensure that the snow is cleared without damaging the pavement. The stability of the snow plouhs is ...
-
Manufactured by Zaugg Ag Eggiwilbased in SWITZERLAND
This small ZAUGG snow plough was made for cost-effective clearing of pavements, factory grounds and narrow streets. It can be mounted on small tractors with engine outputs of up to around 30 kW, small municipal service vehicles or single axle ...
-
Manufactured by bema GmbH Maschinenfabrikbased in GERMANY
Relentlessly against snow: The large blade with maximum clearance performance. bema snow ploughs were developed for use on a wide variety of carrier vehicles. Through optimum adaptation to the ground, low-wear polyurethane clearing blades ensure that the snow is cleared without damaging the pavement. The stability of the ...
-
Manufactured by Murray Machinery Ltdbased in UNITED KINGDOM
The Murray 'Vee' Snow Plough is designed to clear deeper snow than the smaller snow blade, therefore is more heavily constructed and has replaceable ware plates bolted along the bottom edges. They can be supplied to clear various widths, and can be fitted to the front or rear of any tractor or telescopic ...
-
Manufactured by Zaugg Ag Eggiwilbased in SWITZERLAND
The ZAUGG snow plough G6 is the smallest snow plough equipped with the ZAUGG trip edge system operating on two rubber-sprung elements. It is particularly notable for its simple and robust construction and is especially suited for use on narrow track tractors with engine outputs of up to around 40 kW, municipal service vehicles, ...
-
Manufactured by kugelmann Maschinenbau e.K.based in GERMANY
By means of two hydraulic cylinders, the blades can be swiveled to the right and to the left. The two pivoted flaps are controlled by gas pressure shock absorbers. When hitting an obstacle, these absorbers make the flaps fold up and gently move them back into working position. Scraper blades are available in steel or Vulkollan. ...
-
Manufactured by kugelmann Maschinenbau e.K.based in GERMANY
GENTLE SNOW CLEARING: Snow ploughs for clean snow removal without damaging roads and tracks. CLOSED SNOW CLEARING EDGE: No snow is left in the center even with a V-shaped blade. INDIVIDUALLY ADJUSTABLE BLADES: The adjustment range of the blades is up to 30° forward and up to 30° backward. ...
-
Manufactured by AGROMETALL s.r.o.based in CZECH REPUBLIC
Light suspended plough is intended for cleaning of snow thick up to 300 mm. Versatile hitch allows the connection to the majority of mini tractors and mowers. Maximal power of the towing machine is 25 kW. Maximum working speed is 15 km/h, maximum transport speed is 20 km/h. The plough is equipped by depth foot to assure its stability if ...
-
Manufactured by AGROMETALL s.r.o.based in CZECH REPUBLIC
Spring-loaded, hydraulic shooting plough is intended for front mounted operation on mini tractors and municipal machines. Rubber blade and spring locking assure ideal follow of road profile and excellent snow removing. Hydraulic system equipped by two hydraulic cylinders is ideal for force balance in case of either left hand or right hand ...
-
Manufactured by Murray Machinery Ltdbased in UNITED KINGDOM
The Murray Snow Blade comes in various widths and sizes. The blade can be fixed left or right, or can have a manual slew left or right by removing a pin, or can be activated by a double acting hydraulic cylinder. All blades can be fitted with a replaceable rubber edge and castor wheels. Snow Blades can be fitted to tractors, loaders or ...
-
Manufactured by MDB Srlbased in ITALY
the lawnmower, hedge trimmer, rotary snow plough, snow blade, gritter, excavator, ...
-
Manufactured by Bunce (Ashbury) Ltd.based in UNITED KINGDOM
The Bunce TMH spreaders - three point linkage mounted, 'drop' salt spreader designed for use on compact tractors and powered from the tractor hydraulics. These units are ideal for de-icing pavements, cycle ways & small factory sites etc. and the tractor can be fitted with a Bunce compact tractor snow plough to make a very effective ...
-
Manufactured by Ursus S.A.based in POLAND
Control valves used in TUR loaders have, as a standard the 'FLOATING' function which is extremely useful while working in a contact with the ground (gathering up with the bucket, snow plough operation, etc.). On an uneven ground the 'floating' function protects the loader's tools from ...
-
Manufactured by TESMEC S.p.Abased in ITALY
and produces special vehicles for the maintenance of railway, tramway and underground railway lines, and vehicles for snow removal (snow blowers, snow ploughs, etc.) or also for railway lines cleaning (from light snow, ballast or leaves). The unit is suitable for operating also at low temperatures and has been ...
-
Manufactured by Goldoni S.p.A.based in ITALY
is infinite. Just turn the handlebars through 180° and you can use all the front-mounted implements, such as: the lawn mower, mower, snow plough, scraper, ...
-
Manufactured by JAGODA JPS Agromachinesbased in POLAND
(forage harvesters, spreaders, wrappers, winches, shredders) construction machinery, municipal machines ( sweepers, snow plough, sand spreaders), orchard machines, trimmers and many ...
-
Manufactured by METAL-FACH Sp. z o. obased in POLAND
be replaced with a bale grip, a log grip, a silage grip, a bale fork, a manure and straw fork, a pallet fork, a silage cutter, a grip bucket, a peat bucket, a snow plough, or other ...
-
Manufactured by Bunce (Ashbury) Ltd.based in UNITED KINGDOM
The Bunce tractor mounted snowploughs are available with steel or polymer faced moulboards in widths from 1.83 m (6’) to 3.66 m (12’) usually in 610 mm increments. The Heavy duty SnoPro A range is available in standard depths of 650 mm (25.5”) and 865 mm (34”) and the Extra heavy Duty SnoPro B range is only available in 865 mm (34”) depths as ...
-
Manufactured by Etesia UKbased in UNITED KINGDOM
models (Front linkage kits may also be required). Many grounds maintenance tasks, such as snow clearance, sweeping and spreading salt or fertiliser, are seasonal activities, which often results in costly dedicated equipment lying idle during long periods of the year. With budgets being cut across the board, it makes sense where possible to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you